2008 Peugeot 407 C Dag bulb

5
76
AUTOMATIC HEADLAMP ADJUSTMENT

When stationary and when the vehi-
cle is moving, the system automatically
corrects the height of the beam, what-
ever the load of the vehicle. The driver
is then assured of having optimum light-
ing and not causing a nuisance to other
road users.
DIRECTIONAL HEADLAMPS
Activation/Deactivation
When the dipped or main beam head-
lamps are on, this function enables the
light beam to follow the direction of the
road.
The quality of your lighting when turning
is improved considerably.

In cases of malfunction,
the warning light comes on
on the instrument panel dis-
play, accompanied by an au-
dible signal and a message
on the multifunction display. The sys-
tem places your headlamps to the low
position.
Do not touch the xenon bulbs.
Consult a PEUGEOT dealer. Function activated
Function deactivated To deactivate or acti-
vate the function, go to
the
"Personalisation-
Confi guration" menu on
your multifunction display.
When the engine is switched on, the
status of activation/deactivation of this
function selected when the engine was
switched off is retained.
By default, this function is activated.

Note: when stationary or dri-
ving at very low speed, or in
reverse gear, this function is
inactive.

In the event of a malfunc-
tion, this warning light fl ash-
es on the instrument panel.
On vehicles fi tted with daytime
lights, the function is only acti-
vated if the lights stalk is in the
dipped/main beam headlamps
position.
On starting, with the engine
running, the headlamps ini-
tialise automatically and per-
form a vertical sweep.
Consult a PEUGEOT dealer.

1010
112
CHANGING A FRONT BULB
Handle the bulbs with a dry cloth.
2 - Side lights: W 5 W (COOL BLUE
®).

 Turn the access cap a quarter turn,
remove the bulb and change it.

3 - Direction indicators:
PY 21 W (DIADEM
®).

 Turn the access cap a quarter turn,

 Remove the bulb holder.

 Change the bulb.

4 - Front fog lamps: H11 - 55 W.
The headlamps are fi tted with polycar-
bonate glass with a protective coating.
Do not clean them with a dry or abrasive
cloth, nor with a detergent or solvent
product.
Ensure that the liquid used to fi ll the
wash-wipe and headlamp wash reser-
voir is of good quality. Integrated direction indicator side
repeaters

 Push the repeater forwards or
backwards and release it.

 Unclip the repeater and change it.
Repeaters can be obtained from a
PEUGEOT dealer.
Front lights
In the engine compartment, remove
the cover secured by one or two but-
terfl y screws, a plastic retainer clip and
two quarter turn screws.

1 - Dipped beam and main beam headlamps: D1S - 35 W xenon bulb.

WARNING: RISK OF
ELECTROCUTION Coloured bulbs (side lights
and direction indicators) must
be replaced with bulbs of iden-
tical specifi cation and colour.
In certain climatic conditions
(low temperature, humidity),
condensation on the inside
surface of the headlamp glass
is normal; it disappears a few minutes
after the lights are switched on.
Xenon bulbs must be replaced by a
PEUGEOT dealer.

1010
113
CHANGING A REAR BULB

1. Direction indicators: W 16W.

2. Fog lamps: P21 W.

3. Reversing lights: P21 W.

4. Brake lights/side lights: P21/5 W.
 Fold down the panel to gain ac-
cess to the light.

 Unscrew the 2 light fi xing nuts in-
side the boot.

 Disconnect the connector.

 Pull the light towards the outside.

 Unscrew the bulb holder sleeve a
quarter of a turn.

 Unscrew the faulty bulb and
change it.

 Screw in the bulb holder sleeve a
quarter of a turn.

 Put the light back in place from the
outside.

 Reconnect the connector.

 Screw on the 2 light fi xing nuts in-
side the boot. When refi tting, en-
sure that the light is positioned and
fi xed correctly.
Number plate lights: W 5 W.

 Remove the transparent cover us-
ing a screwdriver.

 Change the faulty bulb.

Third brake light: diodes.
Contact a PEUGEOT dealer for re-
placement.

1010
123
ACCESSORIES FOR YOUR 407 COUPÉ
A wide range of accessories recom-
mended by PEUGEOT and original
parts are offered by the network.
They all benefi t from PEUGEOT's
recom mendation.
These accessories and parts, having
been tested and approved for reliabil-
ity and safety, are all adapted to your
PEUGEOT vehicle.
The product range offered by
PEUGEOT Accessories is structured
around 5 categories: PROTECTION -
TOURING - IN-CAR TECHNOLOGY -
STYLING - UNIVERSAL. Anti-theft alarm, engraved
windows, wheel anti-theft
devices, fi rst aid kit, warning
triangle, high visibility safety
jacket, snow chains, anti-
skid covers, ...

"Protection": Mats, boot tray.
For leisure pursuits: child
seats and booster cushions,
audio/telephone console, cool
box, bicycle carrier on towbar.

Trailer towbar which must be fi t-
ted by the PEUGEOT network.

"Touring":
Telephone, hands-free kits, sat-
ellite navigation, CD changer,
multimedia, USB Box.

"In-Car Technology": Alloy wheels, wheel trims,
spoiler, seat covers com-
patible with side air bags,
twin exhaust tailpipe.

"Styling":
Windscreen wash fl uid, inte-
rior and exterior cleaning and
maintenance products.

"Universal":
The fi tting of electrical equip-
ment or accessories which
are not recommended by
PEUGEOT may result in a fail-
ure of your vehicle's electronic system.
Please note this specifi c warning. You
are advised to contact a representa-
tive of the Marque to be shown the
range of recommended equipment
and accessories.
The NINETEEN alloy wheels which
are available as accessories require
the fi tting of tyres of specifi c dimen-
sions (235/40ZR19 96 Y), with a maxi-
mum section of 236 mm. Consult a
PEUGEOT dealer.
Depending on the country in
which the vehicle is sold, it
is compulsory to have a high
visibility safety jacket, warning
triangle and spare bulbs available in
the vehicle.
Note
To prevent the mat from becoming
caught under the pedals:
- ensure that the mat is positioned and secured correctly,
- never fi t one mat on top of another.