2008 Peugeot 206 SW Dag instrument panel
[x] Cancel search: instrument panelPage 1 of 123
FAMILIARISATION
4 -
INSTRUMENTS AND
CONTROLS
1. Cruise control / speed limiter
control.
2. S t e e r i n g w h e e l a d j u s t m e n t
control.
3. Lights and direction indicators
stalk.
4. Instrument panel.
5. Driver's air bag.
Horn.
6. Gear lever.
7. Handbrake.
8. Bonnet release.
9. Fuse box.
10. Dynamic stability control
(ESP/ASR) button.
11. R e a r e l e c t r i c w i n d o w s
deactivation control.
12. Passenger air bag disarming
control.
13. Headlamp height adjustment.
14. Side adjustable and
closing vent.
15. S i d e w i n d o w d e m i s t i n g v e n t .
16. S p e a k e r ( t w e e t e r ) .
17. Windscreen demisting vent.
Page 11 of 123
FAMILIARISATION
14 -
MONITORING
Instrument panel
A. W h e n t h e i g n i t i o n i s o n , t h e
fuel gauge needle should
rise.
B. W h e n t h e e n g i n e i s r u n n i n g , i t s
a s s o c i a t e d l o w l e v e l w a r n i n g
l i g h t s h o u l d s w i t c h o f f .
C. W h e n t h e i g n i t i o n i s o n , t h e o i l
level indicator should display
b e t w e e n o n e a n d s i x s q u a r e s f o r
a f e w s e c o n d s .
I f t h e l e v e l s a r e n o t c o r r e c t , t o p u p
the corresponding level. : 17, 24 Warning lights
1.
W h e n t h e i g n i t i o n i s o n , t h e
o r a n g e a n d r e d w a r n i n g l i g h t s
come on.
2. W h e n t h e e n g i n e i s r u n n i n g ,
t h e s e w a r n i n g l i g h t s s h o u l d
s w i t c h o f f .
I f w a r n i n g l i g h t s r e m a i n o n , r e f e r t o
the page concerned. : 19 Controls
Lighting of the indicator light indi-
cates the status of the corresponding
function.
A.
Deactivation of the rear electric
w i n d o w s .
: 68
B. Deactivation of the ESP and
ASR systems.
: 82
C. Central Locking/Unlocking.
: 60
Page 13 of 123
FAMILIARISATION
16 -
DRIVING SAFELY
Speed limiter
1. Speed limiter mode Selection /
Off.
2. Decreasing of the programmed
value.
3. Increasing of the programmed
value.
4. Speed limiter On / Off.
T h e s p e e d l i m i t e r o p e r a t e s w i t h
a programmed speed of at least
20 mph (30 km/h).
V a l u e s m u s t b e s e t w i t h t h e e n g i n e
running. : 77 Cruise control
1.
Cruise control mode Selection /
Off.
2. Decreasing of the programmed
value.
3. Increasing of the programmed
value.
4. Cruise control On / Off.
I n o r d e r t o b e p r o g r a m m e d o r a c t i v a t e d , the vehicle speed must be above
2 5 m p h ( 4 0 k m / h ) , w i t h a t l e a s t f o u r t h
gear engaged on the manual gear-
box. : 79 Display on the instrument
panel
The cruise control or speed limiter
mode appears on the instrument
panel display
A w h e n i t i s s e l e c t e d ;
an indicator light B comes on on the
i n s t r u m e n t p a n e l w h e n i t i s a c t i v a t e d .
Cruise control
Speed limiter
Page 21 of 123
23
INSTRUMENTS and CONTROLS
-
S e r v i c e i n d i c a t o r
This is a visual reminder of when the
next service is due. This service is to
be carried out according to the man-
ufacturer's servicing schedule.5 seconds after the ignition is
switched on, the total distance re-
corder resumes normal operation
and the display shows the total or trip
distances.
T h e d i s t a n c e r e m a i n i n g b e f o r e
t h e n e x t s e r v i c e i s l e s s t h a n
5 0 0 m i l e s ( 1 , 0 0 0 k m ) .
E x a m p l e : 400 miles (900 km) remain
before the next service is due.
When switching on the ignition and
for 5 seconds, the display shows:
5 seconds after the ignition is
switched on, the total distance re-
corder resumes normal operation
and the spanner remains lit.
This indicates that a service should
be carried out shortly. The display
shows the total or trip distances. T h e s e r v i c e i s o v e r d u e .
Each time the ignition is switched on
and for 5 seconds, the spanner and
t h e e x c e s s d i s t a n c e l a s h .
E x a m p l e :
the service is overdue by
300 miles/km. The service should be
carried out very shortly.
When the ignition is switched on and
for 5 seconds, the display shows:
INSTRUMENT PANEL
DISPLAY
After switching on the ignition, three
functions are shown in succession:
- service indicator,
- engine oil level indicator,
- total distance recorder, it remains displayed for 30 seconds after
the ignition is switched off.
It also displays the speed limiter/
cruise control information, when one
of these systems is active (see cor-
responding section).
5 seconds after the ignition is
switched on, the total distance re-
corder resumes normal operation and
the spanner remains lit. The display
shows the total or trip distances.
Operation
As soon as the ignition is switched
on and for 5 seconds, the spanner
symbolising service operations is lit.
The trip recorder display shows the
d i s t a n c e r e m a i n i n g ( i n r o u n d i g u r e s )
before the next service.
E x a m p l e :
4,800 miles/km remain be-
fore the next service is due. When the
ignition comes on and for 5 seconds
the display shows:
Page 66 of 123
63
VISIBILITY
-
LIGHTS STALK
Dipped / Main beam
change
Pull the stalk towards you. V e h i c l e s i t t e d w i t h f r o n t
f o g l a m p s a n d a r e a r f o g l a m p
( r i n g C )
Side lights Dipped / Main beam
headlampsAutomatic switching
on of lights Rear fog lamp F r o n t f o g l a m p s ( i r s t r o t a t i o n
of the ring forwards)
Front and rear fog
lamps (2nd rotation of
the ring forwards).
N o t e : to switch off the rear fog lamp
and the front fog lamps, turn the ring
backwards twice in succession.
N o t e : when the lights are switched
off automatically or when the dipped
headlamps are switched off manu-
ally, the front fog lamps, the rear fog
lamp and the side lights remain on
(turn the ring backwards to switch off
the front fog lamps. The side lights
then switch off).
V e h i c l e s i t t e d w i t h a r e a r f o g
l a m p ( r i n g B )
This only operates with the dipped /
main beam headlamps.
N o t e : when the lights are switched
off automatically, the rear fog lamp
and the dipped headlamps remain on
(turn the ring backwards to switch off
the rear fog lamp. The dipped head-
lamps and side lights then switch off). The front fog lamps operate with
the side lights and the dipped head-
lamps.
Lights off F r o n t f o g l a m p s a n d r e a r
f o g l a m p
Rotate the ring forwards to switch on
and backwards to switch off. The sta-
t u s i s c o n i r m e d b y t h e i n d i c a t o r l i g h t
on the instrument panel.
L i g h t s o n r e m i n d e r
With the ignition off and the auto-
matic lighting function switched off,
when the driver's door is opened, a
buzzer sounds if you have left your
lights on.
F r o n t a n d r e a r l i g h t s
Selection is by turning ring A.
Page 78 of 123
DRIVING
74 -
'PORSCHE TIPTRONIC
SYSTEM' AUTOMATIC
GEARBOX
The four speed automatic gearbox
offers a choice between the comfort
of integral automatic operation , en-
hanced by a sport and a snow pro-
gramme, or manual gear changing .Gear selection gate
F
Move the lever in the gate to
select a position.
The indicator light corresponding
to the position selected appears
on the instrument panel screen.
P ark: to immobilise the vehicle and
to start the engine , with the hand-
brake on or off.
R everse: to reverse (select this po-
sition with the vehicle stationary, en-
gine at idle).
N eutral: to start the engine and to
park , with the handbrake on.
If position N is inadvertently engaged
while driving, allow the engine to re-
turn to idle before engaging position
D to accelerate.
D rive: for driving in automatic mode.
M anual: for selection of gears.
S : sport programme.
T : snow programme. Moving Off
With the engine running, to move off
from position
P:
F it is essential to press the
brake pedal to exit position P ,
F select position R, D or M, then
gradually release the pressure
on the brake pedal; the vehicle
moves off immediately.
You can also move off from position N:
F release the handbrake, with your
foot on the brake,
F select position R, D or M, then
gradually release the pressure
on the brake pedal; the vehicle
moves off immediately.
Starting the engine
F with the handbrake on, select
position P or N in the gate,
F turn the ignition key to the Start
position. WARNING
When the engine is at idle, brakes not
applied, if position
R, D or M is se-
lected, the vehicle moves even with-
out the accelerator being pressed.
For this reason, do not leave chil-
dren unsupervised inside the ve-
hicle, with the engine running.
When maintenance operations need
to be carried out with the engine run-
ning, apply the handbrake and select
position P.
Page 79 of 123
75
DRIVING
-
Automatic operation
Automatic changing of the four
gears:
F select position D in the gate.
The gearbox always selects the most
suitable gear according to the follow-
ing parameters:
- t h e r o a d p r o i l e ,
- the vehicle load.
The gearbox is then operating in
auto-adaptive mode, without any ac-
tion on your part. If you take your foot off the accel-
erator suddenly, the gearbox will not
change to a higher gear for reasons
of safety.
Manual operation
Manual
changing of the four gears :
F select position M in the gate,
F push the lever to the + sign to
change to a higher gear,
F pull the lever to the - sign to
change to a lower gear.
You can change from position D
(driving in automatic mode) to posi-
tion M (driving in manual mode) at
any time.
WARNING
Never select position N when the ve-
hicle is moving.
Never select positions P or R unless
the vehicle is stationary.
Never change between positions to op-
timise braking on a slippery surface.
Notes
For immediate maximum accelera-
tion without touching the gear lever,
press the accelerator pedal down as
far as it will go (kickdown). The gear-
box will automatically change down
or maintain the gear selected until
maximum engine speed is reached.
When the brake is applied, the gear-
box will automatically change down
i n o r d e r t o p r o v i d e e f i c i e n t e n g i n e
braking. Sport and snow programmes
In addition to the auto-adaptive pro-
gramme, there are two special pro-
grammes.
The programme is displayed on the
instrument panel screen.
Sport programme
F
Press button S once the engine
has been started.
The gearbox automatically favours
sporty driving and more dynamic ac-
celeration.
Snow programme
This programme improves starting
and drive when traction is poor.
F Press button T once the engine
has been started.
The gearbox adapts to driving on
slippery roads.
Note: you can return to the auto-
adaptive programme at any time.
F Press button S or T again to
switch off the programme you
are in. Notes
It is only possible to change from one
gear to another if the vehicle speed
and engine speed permit. If they do
not, the vehicle will operate tempo-
rarily in automatic mode.
When the vehicle is stationary or
moving very slowly, the gearbox au-
tomatically selects gear
M1.
Programmes S (sport) and T (snow)
do not operate in manual mode.
Page 80 of 123
DRIVING
76 -
HANDBRAKE
Operating abnormality
Any operating abnormality is indi-
cated by an audible signal, accom-
panied by the message 'Automatic
gear fault' on the multi-function dis-
play, by a "-" a n d l a s h i n g o f t h e
Sport and Snow warning lights on the
instrument panel display.
In this situation the gearbox oper-
ates in downgrade mode (locked in
3rd gear). You may feel a substan-
tial knock when changing from P to
R and from N to R (this will not cause
any damage to the gearbox).
Do not exceed 60 mph (100 km/h),
respecting local speed limits.
Consult a PEUGEOT dealer.
I f t h e b a t t e r y i s l a t a n d t h e
lever is in position P, it will
be impossible to change
to another position.
In particular, do not force the lever
or there is a risk the gearbox may
be damaged. When the vehicle is be-
ing driven, illumination of
this warning light and of the
STOP
warning light, accom-
panied by an audible signal
and a message on the multifunction
display, indicates that the handbrake
is still on or has not been properly
released.
When parking on a slope,
direct your wheels to im-
mobilise them against the
pavement, pull the hand-
brake and engage a gear.
Applying
Pull the handbrake to immobilise
your vehicle.
Releasing
Pull on the handle and press the but-
ton to release the handbrake.