2008 Peugeot 206 Dag service schedule

23
INSTRUMENTS and CONTROLS
-
Service indicator
This is a visual reminder of when the
next service is due. This service is to
be carried out according to the man-
ufacturer's servicing schedule.5 seconds after the ignition is
switched on, the total distance re-
corder resumes normal operation
and the display shows the total or trip
distances.
The distance remaining before
the next service is less than

500 miles (1,000 km).
Example: 400 miles (900 km) remain
before the next service is due.
When switching on the ignition and
for 5 seconds, the display shows:
5 seconds after the ignition is
switched on, the total distance re-
corder resumes normal operation
and the spanner remains lit.
This indicates that a service should
be carried out shortly. The display
shows the total or trip distances. The service is overdue.
Each time the ignition is switched on
and for 5 seconds, the spanner and
the excess distance lash.
Example:
the service is overdue by
300 miles/km. The service should be
carried out very shortly.
When the ignition is switched on and
for 5 seconds, the display shows:
INSTRUMENT PANEL
DISPLAY
After switching on the ignition, three
functions are shown in succession:
- service indicator,
- engine oil level indicator,
- total distance recorder, it remains displayed for 30 seconds after
the ignition is switched off.
It also displays the speed limiter/
cruise control information, when one
of these systems is active (see cor-
responding section).
5 seconds after the ignition is
switched on, the total distance re-
corder resumes normal operation and
the spanner remains lit. The display
shows the total or trip distances.
Operation
As soon as the ignition is switched
on and for 5 seconds, the spanner
symbolising service operations is lit.
The trip recorder display shows the
distance remaining (in round igures)
before the next service.
Example:
4,800 miles/km remain be-
fore the next service is due. When the
ignition comes on and for 5 seconds
the display shows:

CHECKS
92 -
CHECKS
Handbrake
Where the handbrake travel is too
great or there is a reduction in the
performance of the system, the
handbrake should be adjusted, even
between services.
Have the system checked by a
PEUGEOT dealer. Only use products recom-
mended by PEUGEOT
or products of equivalent
quality and speciications.
To ensure best performance from
components as important as the
power steering and the braking
system, PEUGEOT selects and
offers quite speciic products.
To prevent damage to the electri-
cal units, avoid washing the en-
gine.
RUNNING OUT OF FUEL
(DIESEL)
If you should run out of fuel, it is
necessary to re-prime the circuit:
- ill the fuel tank with at least ive litres of diesel,
- squeeze and release the manual re-priming pump, until fuel
appears in the transparent pipe
under the bonnet,
- operate the starter until the engine starts.
Brake pads
Brake pad wear depends on the style
of driving, in particular for vehicles
which are used in town, over short
distances.
It may be necessary to check the
thickness of the pads, even between
services.
Disc wear status
For any information relating to check-
ing the disc wear status, contact a
PEUGEOT dealer. Oil filter
Change the ilter regularly, in accord
-
ance with the servicing schedule.
Air filter and passenger
compartment filter
Have the ilter elements replaced regu-
larly. If you drive in dusty condi-
tions, change them twice as often. Manual gearbox
This does not require an oil change.
Check the level in accordance with the
manufacturer's servicing schedule.
To check the main levels and cer-
tain components, in accordance
with the manufacturer's servicing
schedule, refer to the pages of
the servicing booklet which corre-
spond to your vehicle's engine.
Battery
At the start of winter, have your bat-
tery checked by a PEUGEOT dealer.