2008 Peugeot 206 Dag low oil pressure
[x] Cancel search: low oil pressurePage 14 of 123
17
INSTRUMENTS and CONTROLS
-
1. Seat belt not fastened warning
light
2. Passenger air bag disarmed
warning light
3. Air bags warning light
4. Front fog lamps indicator light
5. Anti-lock braking system (ABS)
warning light
6. Rear fog lamp indicator light
7. Diesel pre-heat warning light
8. Left hand direction indicator 9.
Total distance recorder, service,
engine oil level and speed
limiter/cruise control indicator
10. Right hand direction indicator
11. Emission control system
warning light
12. Main beam headlamps indicator
light
13. H a n d b r a k e , l o w b r a k e l u i d
level and electronic brake force
distribution warning light
14. Dipped beam headlamps
indicator light
15. Battery charge warning light
16. Engine oil pressure and
temperature warning light
17. Engine oil temperature indicator 18.
Total distance recorder button
19. Central (STOP) warning light
20. Speedometer
21. Coolant temperature indicator
22. Rev counter
23. Lighting rheostat button
24. Fuel level indicator
25. Low fuel level warning light
26. Dynamic stability control
(ESP/ASR) warning light
27. Speed limiter/cruise control
indicator light
INSTRUMENT DIALS: PETROL - DIESEL MANUAL GEARBOX
Page 15 of 123
INSTRUMENTS and CONTROLS
18 -
1. Seat belt not fastened warning
light
2. Passenger air bag disarmed
warning light
3. Air bags warning light
4. Front fog lamps indicator light
5. Anti-lock braking system (ABS)
warning light
6. Rear fog lamp indicator light
7. Left hand direction indicator
8. Total distance recorder, service,
engine oil level and speed
limiter/cruise control indicator 9.
Right hand direction indicator
10. Emission control system warning
light
11. Main beam headlamps indicator
light
12. H a n d b r a k e , l o w b r a k e l u i d
level and electronic brake force
distribution warning light
13. Dipped beam headlamps
indicator light
14. Battery charge warning light
15. Engine oil pressure and
temperature warning light
16. Operating programmes
17. Gear indicator
18. Total distance recorder button 19.
Central (STOP) warning light
20. Speedometer
21. Coolant temperature indicator
22. Rev counter
23. Lighting rheostat button
24. Fuel level indicator
25. Low fuel level warning light
26. Dynamic stability control
(ESP/ASR) warning light
27. Speed limiter/cruise control
indicator light
INSTRUMENT DIALS: PETROL AUTOMATIC GEARBOX
Page 16 of 123
19
INSTRUMENTS and CONTROLS
-
WARNING LIGHTS
A p e r m a n e n t l y l i t w a r n i n g l i g h t o r o n e l a s h i n g , w i t h t h e e n g i n e r u n n i n g , i n d i c a t e s a n o p e r a t i n g f a u l t o f t h e u n i t
c o n c e r n e d .
T h e i l l u m i n a t i o n o f c e r t a i n w a r n i n g l i g h t s m a y b e a c c o m p a n i e d b y a n a u d i b l e s i g n a l a n d a m e s s a g e o n t h e m u l t i-
f u n c t i o n d i s p l a y . D o n o t i g n o r e t h i s w a r n i n g : c o n s u l t a P E U G E O T d e a l e r a s s o o n a s p o s s i b l e .
I f t h e c e n t r a l S T O P w a r n i n g l i g h t c o m e s o n w h e n y o u a r e d r i v i n g , s t o p y o u r v e h i c l e i m m e d i a t e l y , w h e r e i t i s s a f e t o
d o s o .
Central (STOP)
warning light
Linked to the warning lights:
- engine oil pressure and temperature,
- handbrake,
- l o w b r a k e l u i d l e v e l ,
- electronic brake force distribution fault.
Linked to the coolant temperature in-
dicator.
Y o u m u s t s t o p i f t h e l i g h t l a s h e s
w i t h t h e e n g i n e r u n n i n g .
Consult a PEUGEOT dealer. E n g i n e o i l p r e s s u r e
a n d t e m p e r a t u r e
warning light
Linked to the central (STOP) warn-
ing light.
Y o u m u s t s t o p .
This warning light indicates one of
the following:
- i n s u f i c i e n t o i l p r e s s u r e ,
- a lack of oil in the lubrication circuit. Top up the level,
- an oil temperature which is too high. The warning light is
accompanied by an audible
signal. To lower the
oil temperature, reduce your
speed.
Consult a PEUGEOT dealer. H a n d b r a k e , l o w
b r a k e f l u i d l e v e l a n d
E l e c t r o n i c B r a k e F o r c e
D i s t r i b u t i o n f a u l t
warning light
Linked to the central (STOP) warn-
ing light.
This indicates one of the following:
- that the handbrake is applied or not fully released,
- a n e x c e s s i v e d r o p i n b r a k e l u i d level (if the warning light remains
on even when the handbrake is
released),
- a fault in the Electronic Brake Force Distribution, if lit at the
same time as the ABS warning
light.
Y o u m u s t s t o p .
Consult a PEUGEOT dealer.
Page 115 of 123
PRACTICAL INFORMATION
1 0 8 -
Fitting / removing the
mat
When removing the mat on the driv-
er's side, push the seat as far back
a s p o s s i b l e a n d r e m o v e t h e i x i n g s .
W h e n r e i t t i n g , p o s i t i o n t h e m a t c o r -
r e c t l y o n t h e p i n a n d c l i p t h e i x i n g s .
Check that the mat is secured cor-
rectly.
To prevent the mat from becoming
caught under the pedals:
- only use mats suited to the i x i n g s a l r e a d y p r e s e n t i n t h e
vehicle. It is imperative that
t h e s e i x i n g s a r e u s e d .
- n e v e r i t o n e m a t o n t o p o f another. - Clean off bird
droppings, resinous
deposits, tar stains and
grease marks as soon
a s p o s s i b l e ; ( t h e s e a l l c o n t a i n substances which can cause
serious damage to the
paintwork).
- Do not use a dry or abrasive cloth or detergent or solvent
products to clean the double
lens, complex surface
h e a d l a m p s a s t h e y a r e i t t e d
with polycarbonate glass
covered in a protective
i n i s h .
- Do not use petrol, oil or cloth stain removers to clean the
bodywork and plastic parts of
your vehicle.
- To prevent the development of bodywork corrosion as a
result of accidental damage
( s t o n e c h i p s , s c r a t c h e s , e t c . )
have them repaired swiftly.
BODYWORK MAINTENANCE
To preserve the paintwork and the
plastic trim on your vehicle, we recom-
mend that you wash them regularly.
- b y h a n d : t h e r e a r e n o s p e c i i c precautions to take;
- using an automatic car wash: repeated use of poorly
maintained automatic car
washes can lead to the
appearance of microscopic
scratches which give the
paintwork a matt appearance
( e s p e c i a l l y v i s i b l e o n d a r k
colours);
- using a high pressure washer: always follow the
recommendations on the
e q u i p m e n t ( p r e s s u r e a n d
spraying distance).
If there are damaged areas on t h e v e h i c l e ( p a i n t e d b u m p e r s
or headlamps), it is not
recommended to direct the high
pressure jet onto them. Wash
these areas by hand.
Also avoid the entry of water into the locks.
For all questions relating to the main-
tenance of your vehicle, contact an
approved dealer who can advise you
on quality products selected by our
departments.