To activate the power assist feature, manually move a sliding door toward the open or
close position using the inside or outside handle. The power assist feature will automati-
cally complete the motion.
POWER LIFT GATE
The power lift gate can be activated by the buttons on the keyfob, the overhead console, and
the rear door pillar.
Toopen, closeorreverse theliftgate, theautomatic transmission levermust beinP
(Park) .
To open, close or reverse the lift gate with the keyfob, press and hold the keyfob button
for longer than 0.5 seconds.
To close the lift gate with the rear door pillar button, the main ON/OFFswitch must be
on.
The power sliding doors and the power lift gate have an anti-pinch safety feature. Please refer
to your Owner’s Manual for more information regarding this feature.
FRONT SEAT ADJUSTMENTS
With manual seats (if so equipped):
Pull up on the lever
under the front of the seat
and slide backward or forward; release.
Lift the lever
on the side of the seat to adjust
your seatback backward or forward; release when
you have found a comfortable angle and the seat
belt fits properly.
Use the dials
at the side of the driver’s seat to adjust the angle and height of the
seat cushion.
With power seats (if so equipped)
Move thecontrol
forward orbackward to
adjust the seat cushion forward or backward.
Pull uptoraise thedriver’s seatcushion; press
down to lower the cushion.
Push the switchforward to move the seatback forward; press it back to move the
seatback backward.
Your driver’s seathasalumbar support; adjustitby
moving the lever
forward or backward.
16
ADJUSTING AND FOLDING THE 2ND ROW SEAT
To move the 2nd row seats forward of backward: Pull thelever
upand hold itwhile youslide theseat forward orbackward tothe
desired position.
Release the lever to lock the seat in position.
To recline the 2nd row seatbacks:
Pull the lever
up and lean forward or back.
The 2nd row seats can be tipped forward for easy entry or exit from the 3rd row
seat:
To enter the 3rd row seats, lift up on the lever
located on the lower base of the seat;
this tips the seat forward.
To exit the 3rd row seats, pull back on the lever on the lower base of the seat and push
the seat forward.
To fold the 2nd row seats flat to the floor for maximum cargo hauling:
Lift up on the recline lever
to fold the seatback down on the seat base.
Press down on the small lever
on the back of the seat to release the base of the
seat.
Then fold the entire seat forward into the stowed position on the floor
.
Reverse thisprocess toreturn the2nd rowseats toaseating position. Makesureto
press the seats down to the floor until they latch into place.
17
