ADJUSTING AND FOLDING THE 2ND ROW SEAT
To move the 2nd row seats forward of backward: Pull thelever
upand hold itwhile youslide theseat forward orbackward tothe
desired position.
Release the lever to lock the seat in position.
To recline the 2nd row seatbacks:
Pull the lever
up and lean forward or back.
The 2nd row seats can be tipped forward for easy entry or exit from the 3rd row
seat:
To enter the 3rd row seats, lift up on the lever
located on the lower base of the seat;
this tips the seat forward.
To exit the 3rd row seats, pull back on the lever on the lower base of the seat and push
the seat forward.
To fold the 2nd row seats flat to the floor for maximum cargo hauling:
Lift up on the recline lever
to fold the seatback down on the seat base.
Press down on the small lever
on the back of the seat to release the base of the
seat.
Then fold the entire seat forward into the stowed position on the floor
.
Reverse thisprocess toreturn the2nd rowseats toaseating position. Makesureto
press the seats down to the floor until they latch into place.
17
FOLDING THE 3RD ROW SEAT
To fold the 3rd row bench seat flat into the floor for maximum cargo hauling: Disconnect and secure the center seat belt and tongue into the retractor base.
Pull the strap
on the seatback to allow all three head restraints to fold forward.
Pull back on the pull strap
to release the back of the seat and rotate the seatback
toward the back of the vehicle.
Pull up on the lever
located on the back of the seat base. This will fold the seat base
toward the back of the vehicle.
The entire seat will rotate toward you and stow flat in the floor
.
Reverse this process to return the bench seat to a seating position. Make sure to press
the bench seatdown intothefloor andpullback onthe seatback untilitlatches into
place.
Return all three head restraints to the upright latched position.
18
