The selected destination isdisplayed atthe
center of the map. Highlight the “OK” key and
press the ENTER buttonafterconfirming the
location of the displayed destination. The sys-
tem sets the destination to the selected loca-
tion and starts calculating a route.
SETTING A PLACE AS A DESTINATION
Press the DESTbutton.
A nearby airport is set as a destination in this
example.
Highlight the “Points of Interest” key and press
the ENTER button.
Highlight the“Travel” key andpress theEN-
TER button.
From thecategory list,highlight the“AIR-
PORT” keyand press the ENTER button.A
character input screen appears.
Make surethatthecorrect regionisselected
before inputting the name of the location.
After inputting the name of the location, high-
light the “OK” key and press the ENTERbut-
ton. A list screen appears.
Highlight the preferred airport key from the list
and press the ENTERbutton.
31
The selected destination isdisplayed atthe
center of the map. Highlight the “OK” key after
confirming the location of the displayed desti-
nation, and press the ENTERbutton. The sys-
tem sets the destination to the selected loca-
tion and starts calculating a route.
BEGINNING ROUTE GUIDANCE
After setting a destination and performing route calculation, the suggested route is displayed.
Highlight the “OK” key and press the ENTER
button. Thesystem willnavigate youthrough
the guide points usingvisual andvoice guid-
ance.
When approaching aguide point,thesystem
automatically changes to the split screen and
shows an enlarged view of the intersection in
the left screen.
When arriving atthe destination, theroute
guidance automatically ends.
32
