2008 NISSAN QUEST Owners Manual

Page 305 of 376

NISSAN QUEST 2008 V42 / 3.G Owners Manual When checking or replacement is required, we
recommend your NISSAN dealer for servicing.
CAUTION
cUse only Genuine NISSAN Matic K ATF.
Do not mix with other fluids.
cUsing automatic transmission fluid

Page 306 of 376

NISSAN QUEST 2008 V42 / 3.G Owners Manual BRAKE FLUID
Check the brake fluid level in the reservoir. If the
fluid level is below the MIN line or the brake
warning light comes on, add Genuine NISSAN
Super Heavy Duty Brake Fluid or equivalentDOT

Page 307 of 376

NISSAN QUEST 2008 V42 / 3.G Owners Manual cKeep the battery surface clean and dry.
Clean the battery with a solution of baking
soda and water.
cMake certain the terminal connections are
clean and securely tightened.
cIf the vehicle is not to

Page 308 of 376

NISSAN QUEST 2008 V42 / 3.G Owners Manual 2. Check the fluid level in each cell. If it is
necessary to add fluid, add only distilled
water to bring the level up to the bottom of
the filler opening.Do not overfill.Vehicles operated in high tem

Page 309 of 376

NISSAN QUEST 2008 V42 / 3.G Owners Manual 2. Have the belt checked regularly for condi-
tion and tension in accordance with the
maintenance schedule found in the
“NISSAN Service and Maintenance Guide”.
REPLACING SPARK PLUGS
Platinum-tippe

Page 310 of 376

NISSAN QUEST 2008 V42 / 3.G Owners Manual The air cleaner filter should not be cleaned and
reused. Replace it according to the maintenance
log shown in the “NISSAN Service and Mainte-
nance Guide.” When replacing the filter, wipe the
insi

Page 311 of 376

NISSAN QUEST 2008 V42 / 3.G Owners Manual CLEANING
If your windshield is not clear after using the
windshield washer or if a wiper blade chatters
when running, wax or other material may be on
the blade or windshield.
Clean the outside of the

Page 312 of 376

NISSAN QUEST 2008 V42 / 3.G Owners Manual Be careful not to let anything get into the washer
nozzle
sA. This may cause clogging or improper
windshield washer operation. If something gets
into the nozzle, remove it with a needle or small
pin
s