2008 NISSAN QUEST 04IT Navigation Manual

Black plate (97,1)
Model "NISSAN_NAVI" EDITED: 2007/ 2/ 26
NAV2782
INFO:
Even after setting a destination, you can
adjust the location of the destination, store
the route, etc.
“OPERATIONS AFTER SETTING A
DESTINATION” (page 4-48)
Setting a destination4-25

Black plate (98,1)
Model "NISSAN_NAVI" EDITED: 2007/ 2/ 26
NAV2783
SETTING A PREVIOUS DESTINATION
1. Push.
2. Highlight [Previous Destinations] and push
.
NAV2784
3. Highlight the preferred destination from the
list and push.
NAV2785
4. The selected destination is displayed at the
center of the map. Highlight [OK] after
confirming the location of the displayed
destination, and push.
The system sets the destination to the
selected location and starts calculating a
route.
4-26Setting a destination

Black plate (99,1)
Model "NISSAN_NAVI" EDITED: 2007/ 2/ 26
NAV2786
INFO:
Even after setting a destination, you can
adjust the location of the destination, store
the route, etc.
“OPERATIONS AFTER SETTING A
DESTINATION” (page 4-48)
Setting a destination4-27

Black plate (100,1)
Model "NISSAN_NAVI" EDITED: 2007/ 2/ 26
NAV2787
SETTING THE PREVIOUS STARTING
POINT
1. Push.
2. Highlight [Others] and push.
NAV2788
3. Highlight [Previous Starting Point] and push
.
NAV2789
4. The starting point of the route of the
previous route guidance is displayed at the
center of the map. Highlight [OK] after
confirming the location of the displayed
destination, and push.
The system sets the destination to the
selected location and starts calculating a
route.
4-28Setting a destination

Black plate (101,1)
Model "NISSAN_NAVI" EDITED: 2007/ 2/ 26
NAV2790
INFO:
Even after setting a destination, you can
adjust the location of the destination, store
the route, etc.
“OPERATIONS AFTER SETTING A
DESTINATION” (page 4-48)
Setting a destination4-29

Black plate (102,1)
Model "NISSAN_NAVI" EDITED: 2007/ 2/ 26
NAV2787
SETTING FROM STORED ROUTES
1. Push.
2. Highlight [Others] and push.
NAV2791
3. Highlight[StoredRoutes]andpush
.
A list screen is displayed.
NAV2792
4. Highlight the preferred route from the list
and push.
The route to the destination is set.
INFO:
The stored route includes only locations
(destination and waypoints) and route cal-
culation conditions, not the route itself.
Therefore, when the destination is set using
a stored route, a different route may be
suggested if the current vehicle location is
different from the one when the route was
stored.
4-30Setting a destination

Black plate (103,1)
Model "NISSAN_NAVI" EDITED: 2007/ 2/ 26
When you are setting the destination to a facility,
the following methods are available.
.Setting a Point of Interest
This allows you to find a facility by type, and
then have the system calculate a route to
that destination. Specify the region and city
of the destination to find it more quickly.
.Setting a Freeway Entrance/Exit
This allows you to set the destination to an
entrance or exit of a freeway, and then have
the system calculate a route.
.Setting by Phone Number
If you know the telephone number of the
facility, use this to find the facility by entering
the number, and then have the system
calculate a route.
.Setting a Nearby Place
This allows you to set the destination to a
facility located near the current vehicle
location or another location that you move
to by scrolling the map, and then have the
system calculate a route.
If there are any particular Points of Interest
that you intend to use frequently, you can
store them in the list of nearby Points of
Interest.
“CUSTOMIZING NEARBY PLACES”
(page 6-33)
SETTING A FACILITY AS THE
DESTINATION
Setting a destination4-31

Black plate (104,1)
Model "NISSAN_NAVI" EDITED: 2007/ 2/ 26
NAV2728
SETTING A POINT OF INTEREST
1. Push.
2. Highlight [Points of Interest] and push
.
NAV2793
3. Highlightthemaincategoryandpush
.
INFO:
Highlight [By Name] and pushto
include all categories in the route calculation
conditions.
NAV2794
4. Highlight the subcategory and push
.
A character input screen is displayed.
4-32Setting a destination