2008 NISSAN MAXIMA Owners Manual

Page 281 of 328

NISSAN MAXIMA 2008 A34 / 6.G Owners Manual cDo not drive your vehicle over 85
MPH (137 km/h) unless it is
equipped with high speed rated
tires. Driving faster than 85 MPH
(137 km/h) may result in tire fail-
ure, loss of control and possible
in

Page 282 of 328

NISSAN MAXIMA 2008 A34 / 6.G Owners Manual s5Tire size – refer to “Tire labeling” later
in this section.
s6Spare tire size (if so equipped) .
Checking tire pressure
1. Remove the valve stem cap from the
tire.
2. Press the pressure gauge

Page 283 of 328

NISSAN MAXIMA 2008 A34 / 6.G Owners Manual Size Cold Tire Inflation
PressureHigh Speed/
Maximum Load
Cold Tire Inflation
Pressure
Front Original TireP225/55R17 95V 230 kPa, 33 PSI 240 kPa, 35 PSI
P245/45R18 96V 220 kPa, 32 PSI 260 kPa, 38 PSI

Page 284 of 328

NISSAN MAXIMA 2008 A34 / 6.G Owners Manual s1Tire size (example: P215/65R15 95H)
1. P: The9P9indicates the tire is de-
signed for passenger vehicles (not all
tires have this information) .
2. Three-digit number (215): This num-
ber gives the w

Page 285 of 328

NISSAN MAXIMA 2008 A34 / 6.G Owners Manual s2TIN (Tire Identification Number) for a
new tire (example: DOT XX XX XXX
XXXX)
1. DOT: Abbreviation for the9Depart-
ment Of Transportation.9The symbol
can be placed above, below or to the
left or rig

Page 286 of 328

NISSAN MAXIMA 2008 A34 / 6.G Owners Manual s7The word “radial”
The word “radial” is shown if the tire has
radial structure.
s8Manufacturer or brand name
Manufacturer or brand name is shown.
Other Tire-related Terminology
In addition to

Page 287 of 328

NISSAN MAXIMA 2008 A34 / 6.G Owners Manual studded tires. Skid and traction capabilities of
studded snow tires on wet or dry surfaces may be
poorer than that of non-studded snow tires.
TIRE CHAINS
CAUTION
Tire chains/cables should not be insta

Page 288 of 328

NISSAN MAXIMA 2008 A34 / 6.G Owners Manual Wheel nut tightening torque:
83 ft-lb (112 N·m)
The wheel nuts must be kept tight-
ened to specifications at all times. It
is recommended that wheel nuts be
tightened to specification at each
tire ro