LOAD BUTTON
LOAD A SINGLE DISC - Press the
button for less than 1.5 seconds. Select the
loading slot by pressing one of the CD insert select button ( 1-6 ) , then insert the CD.
LOAD UP TO 6 DISCS - Press and hold the
button for more than 1.5 seconds.
The slot numbers (1-6) will illuminate on the display when CDs are loaded into the
changer.
*XM Satellite Radioisonly available onvehicles equipped withoptional XMsatellite
subscription service.
CLOCK SET/ADJUSTMENT
Press and hold the DISP CLOCKbutton until it beeps. The hours will start flashing.
Press the CAT/FOLDER orSEEK/TRACK button to adjust the hours.
Press the DISP CLOCK button to switch to the minute adjustment.
Press the CAT/FOLDER orSEEK/TRACK button to adjust the minutes.
Press the DISP CLOCK button to store the time and exit clock set mode.
TRIP COMPUTER (if so equipped)
The trip computer readout is in the speedometer display. With
theignition keyinthe ON position orthe vehicle running, you
can select anitem bypressing theCHANGE buttononthe
instrument panel. It can show the following items:
TRIP “A” – Measures the distance of one specific trip.
TRIP “B” – Measures the distance of a second specific trip.
DISTANCE TOEMPTY (dte)–Estimates thedistance thatcanbedriven before
refueling.
AVERAGE SPEED (mph or km/h) – Shows the average speed since the last reset.
AVERAGE FUELCONSUMPTION (mpgorL/100km) –Shows theaverage fuel
consumption since the last reset.
JOURNEY TIME – Shows the time since the last reset.
RESET – Press the CHANGE button on the instrument panel for more than 1 second to
reset the trip odometer to zero.
INSTRUMENT BRIGHTNESS CONTROL/TRIP CHANGE BUTTON
The instrument brightness controloperates whentheheadlight
control switch is in the
orposition.
Turn thecontrol toadjust thebrightness ofthe instrument panel
lights.
Press the change button to select trip computer features.
8
