Page 17 of 32

 2008 Nissan Towing Guide    16 the handling of your vehicle and cause a very unsafe situation.  
  Finally, do not carry flammable materials, such as gasoline, in your trailer. In the event of an 
accident, an explosion or fire could occur. 
 
ENSURING VEHICLE/TRAILER STABILITY 
Improper loading, excessive or insufficient trailer tongue/king pin load, overloading, excessive 
trailer weight, poorly designed trailer suspensions, crosswinds, and poor maintenance are all 
things that can affect the stability of your vehicle and trailer combination.  
If swaying does occur, check the cargo load for proper balance and distribution to ensure 
proper trailer tongue/king pin load. In addition, check the condition of the suspension and 
shocks, as well as the tires, tire pressures, and wheel bearings on both the tow vehicle and 
the trailer. If swaying occurs because of high winds or poor weather conditions, wait until 
these conditions improve before resuming your trip.   
  If the swaying continues and you feel your trailer is suitably balanced and within the towing 
capacity limits of your vehicle, discontinue towing and consult your Nissan dealer or trailer 
manufacturer to determine the problem. Most important, do not tow until the problem is 
corrected.
  
 
VEHICLE SPEED 
Some states have specific regulations and speed limits for vehicles that are towing trailers. 
Always obey these ordinances.  
Remember to reduce your speed in unsafe or less-than-ideal road conditions or weather. 
When towing a trailer, braking distances increase while handling agility decreases. Always 
leave yourself an extra margin of distance to respond to emergency situations. 
 
PASSENGERS 
Never allow passengers to ride inside a trailer while it is being towed. Not only is this 
unlawful in most areas, passengers could be seriously injured during sudden trailer movement 
or in an accident. In addition, trailers may allow fumes from the tow vehicle to leak inside. This 
could result in carbon monoxide poisoning from the engine exhaust. 
 
VEHICLE MODIFICATIONS 
Vehicle modifications — beyond those required for proper hitch installation, wiring hook-up, 
and necessary cooling system upgrading — are not recommended for any Nissan vehicle 
being used for towing purposes. Changes to the drivetrain, suspension, exhaust systems, 
frame structure/unibody, or other vehicle components are not necessary for towing within the  
         
        
        
     
        
        Page 18 of 32

 2008 Nissan Towing Guide    17 limits described in this guide. These changes may diminish the reliability and longevity of your 
vehicle and possibly void warranty coverage. 
 
TOOL KIT 
It is always a good idea to travel with a special tool kit when towing. In addition to tools, it 
should contain flares, a flashlight, emergency reflectors, jumper cables, extra fuses, extra 
radiator coolant, oil, and easily replaced spare parts such as taillight bulbs. You should also 
carry spare tires for your tow vehicle and trailer, as well as a jack suitable for use on the trailer. 
Be aware that not all automotive jacks can be used safely on a trailer. 
 
BEFORE STARTING OUT 
Before starting out on a trip, make one last inspection of the tow vehicle and the trailer. Are 
the tire pressures correct? Are the safety chains/cables securely in place? Is the cargo tied 
down securely? Do all the lights work? Is the coupler properly attached over the hitch ball and 
secured using a locking pin? Is the breakaway switch hooked up and functioning properly? 
Are vehicle and electric trailer brakes working properly?  
  Make a checklist of key items to be inspected, and don’t forget the basics. When towing, 
vehicle engine oil, transmission oil, and coolant should always be checked before starting out. 
Finding a potential problem while in your driveway is better than discovering it miles from 
home.  
 
 
TOWING  
TIPS                     
 
If you’ve never towed a trailer before, be aware that it does take getting used to. To begin with, 
towing noticeably affects your vehicle’s performance:  
 Š It will not accelerate as quickly — an important point to keep in mind when merging onto a 
highway.  
 Š It will not stop as quickly. Leave more room than usual between you and the traffic ahead, 
and brake sooner when coming to a stop.  
 Š Abrupt maneuvering can unbalance the load and reduce the handling stability of your tow 
vehicle. Plan ahead and make lane changes and turns smoothly.  
If possible, before you actually hit the open road, practice towing in a large uncrowded area 
such as a stadium or shopping center parking lot. Become especially familiar with backing up 
a trailer — the maneuver many people find most difficult.  
         
        
        
     
        
        Page 19 of 32

 2008 Nissan Towing Guide    18 REDUCE SPEED 
Drive your vehicle at a moderate speed, and remember to reduce your speed in unsafe or 
less-than-ideal road conditions or weather. The tendency for a trailer to sway increases with 
speed, and such swaying can result in a loss of control. 
 
BRAKE SOONER 
The combination of your tow vehicle and trailer obviously requires a greater distance to stop. 
A good rule of thumb to remember is that for each 10 mph of speed, allow yourself one tow 
vehicle and trailer length of distance between the front of your vehicle and the vehicle ahead.  
  When braking, use firm but gradual pressure on the pedal rather than panic braking. 
Applying the brakes abruptly or with too much force can cause the trailer to skid or jackknife 
at its point of attachment with the vehicle. This, in turn, can throw the tow vehicle out of 
control. If equipped with an electric trailer brake controller, follow the recommended 
operational instructions. 
 
PASS CAREFULLY 
As mentioned in the introduction to this section, because of the added weight of the trailer, 
acceleration capability is reduced and you’ll require a longer distance to pass another vehicle. 
Be certain you have sufficient time and space to pass safely. Obviously, never attempt passing 
on hills or when going around curves. 
 
CORNER MORE SLOWLY 
Know your vehicle and trailer capabilities. Entering a sharp corner too quickly or abruptly can 
“crack the whip,” whereby the trailer can actually pull the tow vehicle off the road. Therefore, 
when approaching a relatively sharp corner, begin braking sooner than you would when not 
towing. Do your braking in a straight line prior to the corner, and turn smoothly into it. In 
addition, remember to make a wider turn than normal to ensure that the trailer safely clears the 
inside of the turn. 
  When towing a 5th wheel or gooseneck trailer, do not make sharp turns while driving or 
backing as the trailer may contact the vehicle and cause damage to both the trailer and 
vehicle. A special extended 5th wheel pin box or sliding hitch may be required to provide 
additional trailer-to-truck clearance for tight maneuvering. 
 
BACK UP WITH CAUTION 
Backing up with a trailer is a difficult maneuver; however, there is a “trick” that can simplify the 
procedure considerably. Simply steer with one hand at the bottom of the steering wheel. To 
turn the trailer to the left, first move the steering wheel to the left. To turn the trailer to the right,  
         
        
        
     
        
        Page 20 of 32

 2008 Nissan Towing Guide    19 move the wheel to the right. All movements of the wheel should be done in small increments. 
Of course, backing up should be done only at very slow speeds. For large trailers that 
obstruct your rearward vision, have someone outside the vehicle act as a “spotter” to guide 
you along. 
 
PARK SMART 
A tow vehicle and trailer can be an unwieldy combination in a small area, so always try to park 
where you will have a relatively easy time maneuvering. Once parked, always block the wheels 
on both the tow vehicle and the trailer.   
  Parking on a slope is not recommended. If, however, you must park on a slope and your 
vehicle is equipped with an automatic transmission, there are some precautions you should 
take:  
 Š Have someone block the wheels once the tow vehicle and trailer are in position and being 
held by the vehicle’s brake. 
 Š Next, apply the parking brake and only then move the gear lever into PARK. If you move the 
lever into PARK before blocking the wheels and applying the parking brake, transmission 
damage may occur. 
 
HIGH-ALTITUDE PERFORMANCE 
An engine will lose about 4% of its performance for every 1,000 feet above sea level that you 
travel. If you will be towing in high altitudes, it is a good idea to allow more time than usual due 
to the engine’s reduced performance. 
 
TOW MODE (IF EQUIPPED) 
Tow Mode should be used when the vehicle and trailer weight is at least 75% of the vehicle 
GCWR. This mode is most useful when towing a heavy trailer or hauling a heavy load, 
particularly when stop-and-go traffic, rolling terrain, or a busy parking lot is involved. 
  Driving the vehicle in Tow Mode with minimal trailer load will not cause any damage; 
however, fuel economy may be reduced and transmission/engine driving characteristics may 
feel different.  
 
HILLS – UPGRADES 
As the incline increases, shift down to a lower gear to maintain speed and prevent the engine 
from lugging. However, for long and steep grades, do not stay in first gear when driving above  
35 mph or in second gear above 58 mph. The added weight of a trailer places an increased  
load on the engine and cooling system, so monitor your coolant temperature gauge and
  
         
        
        
     
        
        Page 21 of 32

 2008 Nissan Towing Guide    20 automatic transmission fluid temperature gauge (if equipped) very carefully. At the first sign of 
overheating, pull to the side of the road. See IF YOUR ENGINE OVERHEATS later in this 
section for more information. 
 
HILLS – DOWNGRADES 
While going downhill, the weight of the trailer pushing on the tow vehicle may decrease 
overall stability. Therefore, to maintain adequate control, reduce your speed and shift to a 
lower gear.  
Avoid long or repeated use of the brakes when descending a hill, as this reduces their 
effectiveness and could cause overheating. Shifting to a lower gear instead provides “engine 
braking” and reduces the need to brake as frequently. 
 
AUTOMATIC CRUISE CONTROL 
Do not use cruise control while towing a trailer. 
 
IF YOUR ENGINE OVERHEATS 
A moderate increase in engine operating temperature is normal when towing a trailer. If, 
however, the coolant temperature gauge reading is abnormally high, or if you are experiencing 
a significant loss of power, or if you hear unusual engine noises,* the engine may be 
overheating and you should immediately take the following steps: 
 
1.  Pull your vehicle safely over to the side of the road, out of traffic. Apply the parking brake 
and move the gearshift lever to NEUTRAL (manual) or PARK (automatic). DO NOT STOP 
THE ENGINE. 
2.  Turn off the air conditioning and, after opening all the windows, turn the heater on to 
maximum hot and the fan to its highest speed. The heater core in your vehicle is just like a 
miniature engine radiator and will provide an extra cooling surface to help reduce engine 
temperature.  
3.  Run the engine at a fast idle (approximately 1,500 rpm) until the temperature gauge returns  
to a normal reading. If the temperature does not drop or continues to increase, stop this 
step immediately.  
4.  Being cautious of traffic, step out of the vehicle and, from a safe distance, look for steam
 
underneath the engine. If you see steam or leaking coolant, stand clear to avoid being 
burned and shut off your engine immediately and allow it to cool. If there is no steam, open 
the hood. Never remove the radiator cap when the radiator is hot. If the cap is removed 
under these conditions, hot water under high pressure may spurt out, possibly causing  
 
*See your vehicle owner’s manual for additional indications that your vehicle may be overheating.  
         
        
        
     
        
        Page 22 of 32

 2008 Nissan Towing Guide    21 serious injury.  
 
5.  As soon as the engine has cooled to its normal operating temperature, visually inspect 
  the drive belts for damage or looseness. A loose belt reduces water pump efficiency. Be  
careful to keep your hands, hair, jewelry, and clothing clear of the running drive belt  and  
other moving parts when inspecting the engine and radiator. Also check to see if the 
cooling fan is running, and inspect the water pump, radiator, and radiator hoses for leaks.  
Keep in mind, too, that if your vehicle is equipped with an electric fan motor, it may start 
without warning any time the coolant temperature is high. If you find leaking coolant, a 
loose or missing drive belt, or an inoperable fan, turn off the engine immediately. 
 
6.  If no leaks are apparent and all other components appear to be operating properly with 
  the engine cooled to its normal operating temperature, check the coolant level in the 
  reservoir tank with the engine running. Add coolant to the reservoir tank if needed. At this
  point, if repairs are required, go to the nearest Nissan dealer. See the IN CASE OF 
  EMERGENCY section of your vehicle owner’s manual for additional information on 
    
 overheating. 
NOTE – Armada, Frontier, Pathfinder, and Titan vehicles have an engine protection mode, 
which helps reduce the chance of engine damage if the engine coolant reaches a specified 
temperature. See your vehicle owner’s manual for details. 
 
 
TOWING  
GLOSSARY 
5TH WHEEL 
HITCH Located just forward of the rear axle centerline, this hitch uses a 
king pin to serve as the pivot point for the trailer. 
 
BALL MOUNT A bar that holds the hitch ball and is inserted into the hitch receiver. 
Also commonly called a drawbar or “stinger.” 
 
BREAKAWAY SWITCH A safety device using a trailer battery that automatically applies the 
trailer’s brakes if it should accidentally become separated from the 
tow vehicle. A breakaway switch may be used with both electric or 
surge trailer brake systems. 
 
BUMPER HITCH A reinforced bumper designed to accommodate a hitch ball.  
ELECTRIC TRAILER 
BRAKES When the brakes on a tow vehicle are applied, an electric current is 
sent to an actuator which applies the trailer’s brakes. 
 
ELECTRIC TRAILER  
BRAKE CONTROLLER A device that controls the electric trailer brakes.    
         
        
        
     
        
        Page 23 of 32

 2008 Nissan Towing Guide    22
 
 
GOOSENECK HITCH Located just forward of the rear axle centerline, this hitch uses a 
ball to serve as the pivot point for the trailer. 
 
GROSS AXLE  
WEIGHT RATING (GAWR) 
 The maximum amount of weight each vehicle axle (front and rear) is 
designed to safely carry.     
 
GROSS COMBINED  
WEIGHT RATING (GCWR) The maximum allowable combined weight of the vehicle and trailer, 
including passengers and all cargo. 
 
GROSS VEHICLE 
WEIGHT RATING (GVWR) The maximum allowable weight of the vehicle, including 
passengers, cargo, fuel, hitch, trailer tongue load, and any optional 
equipment. 
 
KING PIN 
LOAD The amount of trailer (5th wheel or gooseneck) weight pressing 
down on the tow vehicle hitch. 
 
HITCH BALL 
 A ball that connects the trailer to the tow vehicle hitch and provides 
the means by which the trailer pivots during cornering.  Available in 
a number of sizes and weight capacities, it must correspond to the 
trailer coupler size, and have a sufficient capacity rating for the 
trailer being pulled. 
 
RECEIVER HITCH A frame- or structure-mounted hitch with a receiver that allows 
removal of the ball mount. 
 
SAFETY CHAINS/CABLES Provides an emergency connection between the tow vehicle and 
the trailer, should the trailer become disengaged for any reason. 
 
SURGE BRAKES 
 Hydraulic-type braking system activated by inertia. As the tow 
vehicle begins to brake, the trailer pushes against the hitch ball, 
consequently activating the trailer brakes.   
 
TRAILER TONGUE/COUPLER The part of the trailer that extends forward to meet the tow vehicle, 
and also carries the coupler assembly. 
 
TRAILER TONGUE 
LOAD The amount of trailer (conventional) weight pressing down on the 
tow vehicle hitch. 
 
WEIGHT-DISTRIBUTING 
HITCH SYSTEM Type of hitch system that helps shift the trailer tongue weight to all 
trailer tires and the tow vehicle front tires. Strongly recommended 
when towing trailers with a Maximum Trailer Weight greater than 
5,000 lbs. 
 
WIRING HARNESS 
 Provides an electrical connection linking the tow vehicle’s electrical 
system to the trailer’s system. 
    
         
        
        
     
        
        Page 24 of 32
 2008 Nissan Towing Guide    23
SPECIFICATIONS  
 
TOWING CAPACITIES 
SUV’s, Trucks, and Minivan 
   
 
 
 
 
 
 
 
 
 
 
 
 
 
  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
2008 ARMADA TOWING DATA 
Engine Type 5.6L V8 
Transmission A/T 
Model(s)  2WD 4WD 
without optional tow package 6,500 6,500 Maximum  
Trailer Weight1,4 (lbs.) with optional tow package6 9,100 9,000 
without optional tow package 650 650 Maximum  
Trailer Tongue Load (lbs.) with optional tow package6 910 900 
without optional tow package 12,800 13,000 Gross Combined  
Weight Rating (lbs.) with optional tow package6 15,100 15,100 
2008 FRONTIER TOWING DATA 
Engine Type  2.5L  
4-Cylinder 4.0L V6 
Transmission A/T & M/T 
Model(s) 
King  
Cab 
2WD 
King  
Cab 
2WD 
King  
Cab 
4WD 
Crew  
Cab 
2WD 
Crew  
Cab 
4WD 
Maximum  
Trailer Weight1,3,4 (lbs.) 3,500 6,500 6,300 6,300 6,100 
Maximum  
Trailer Tongue Load3 (lbs.) 350 650 630 630 610 
Gross Combined  
Weight Rating (lbs.) 7,936 11,133 11,133 11,133 11,133 
Maximum  
Trailer Frontal Area 60 sq. ft.