2008 NISSAN ALTIMA Owners Manual

Page 145 of 352

NISSAN ALTIMA 2008 L32A / 4.G Owners Manual Electric control type
The outside mirror remote control only operates
when the ignition switch is in the ACC or ON
position.
Rotate the control lever to select the right or left
mirror. Adjust the mir

Page 146 of 352

NISSAN ALTIMA 2008 L32A / 4.G Owners Manual 4 Monitor, climate, audio, phone and voice
recognition systems
Control panel buttons (if so equipped)...............4-2
Setting up the start-up screen...................4-3
How to use the SETUP button

Page 147 of 352

NISSAN ALTIMA 2008 L32A / 4.G Owners Manual Voice commands..............................4-62
Pairing procedure.............................4-62
Phone download..............................4-63
Making a call..................................4-65

Page 148 of 352

NISSAN ALTIMA 2008 L32A / 4.G Owners Manual WARNING
cDo not disassemble or modify this sys-
tem. If you do, it may result in accidents,
fire, or electrical shock.
cDo not use this system if you notice any
abnormality, such as a frozen screen or

Page 149 of 352

NISSAN ALTIMA 2008 L32A / 4.G Owners Manual When you use this system, make sure the engine
is running.
If you use the system with the engine not
running (ignition ON or ACC) for a long
time, it will use up all the battery power,
and the engine

Page 150 of 352

NISSAN ALTIMA 2008 L32A / 4.G Owners Manual Display settings
Touch the “Display” key. The display screen will
appear.
Display/brightness/contrast:
Touch the “–” key or the “+” key to adjust the
brightness and contrast of the scree

Page 151 of 352

NISSAN ALTIMA 2008 L32A / 4.G Owners Manual Clock
Adjusting the time:
The following display will appear when pressing
the SETUP button, then touching the “Clock” key.
On-screen Clock:
When this item is turned on, a clock is always
displayed

Page 152 of 352

NISSAN ALTIMA 2008 L32A / 4.G Owners Manual cNewfoundland zone
After selection, touch the “Back” key the Clock
screen will appear.
Pacific zone has been set as the initial (default)
setting.
Beep setting
Touch the “Volumes/Tones” key. T