2008 NISSAN ALTIMA HYBRID display

[x] Cancel search: display

Page 147 of 351

NISSAN ALTIMA HYBRID 2008 L32A / 4.G Owners Manual TROUBLESHOOTING GUIDE
Verify the location of all Intelligent Keys that are
programmed for the vehicle. If another Intelligent
Key is in range or inside the vehicle, the vehicle
system may respond diff

Page 155 of 351

NISSAN ALTIMA HYBRID 2008 L32A / 4.G Owners Manual To turn on the automatic anti-glare feature, press
thebutton again. The indicator light will
turn on.
For information on HomeLinkTUniversal Trans-
ceiver operation, see “HomeLinkTUniversal
Transceiv

Page 157 of 351

NISSAN ALTIMA HYBRID 2008 L32A / 4.G Owners Manual 4 Monitor, climate, audio, phone and voice
recognition systems
Control panel buttons (if so equipped)...............4-2
Setting up the start-up screen...................4-3
How to use the SETUP button

Page 160 of 351

NISSAN ALTIMA HYBRID 2008 L32A / 4.G Owners Manual When you use this system, make sure the Hybrid
System is turned ON.
If you use the system with the Hybrid Sys-
tem off (ignition ON or ACC) for a long time,
it will use up all the 12-volt battery powe

Page 161 of 351

NISSAN ALTIMA HYBRID 2008 L32A / 4.G Owners Manual Display settings
Touch the “Display” key. The display screen will
appear.
Display/brightness/contrast:
Touch the “–” key or the “+” key to adjust the
brightness and contrast of the scree

Page 162 of 351

NISSAN ALTIMA HYBRID 2008 L32A / 4.G Owners Manual Clock
Adjusting the time:
The following display will appear when pressing
the SETUP button, then touching the “Clock” key.
On-screen Clock:
When this item is turned on, a clock is always
displayed

Page 163 of 351

NISSAN ALTIMA HYBRID 2008 L32A / 4.G Owners Manual cNewfoundland zone
After selection, touch the “Back” key the Clock
screen will appear.
Pacific zone has been set as the initial (default)
setting.
Beep setting
Touch the “Volumes/Tones” key. T

Page 164 of 351

NISSAN ALTIMA HYBRID 2008 L32A / 4.G Owners Manual Select Language:
Touch the “Select Language” key. From the fol-
lowing display, select the English “ON” key or the
Français “ON” key for your language preference.Select Units:
Touch the