2008 MERCEDES-BENZ SLK-Class key

42 AudioRadio operationTuning via station presets Ten presets each are available for FM and
AM. On COMAND control unitThe presets are accessed using the num
-
ber keypad, or via the Presets menu.Accessing via number keypad: 
Switch to the desired waveband ( page
40)
.

Press one of the number keys

3
- "
.
The system tunes to the station stored
under this number.
Accessing via Presets menu:
Switch to the desired waveband ( page
40)
.

Press the
Presets
soft key.
The Presets menu appears.

Use

, 
, 
or

to choose a
preset and press

;
or
Press one of the number keys

3
- "
.
The system tunes to the station stored
under this number.
On multifunction steering wheel
Switch the multifunction display in the
instrument cluster to the Radio display ( page
27)
.

Press
j.
The system tunes to the next station
stored in the station presets;
or
Press
k.
The system tunes to the previous sta
-
tion stored on the station presets.iAudio search function
Memory
must be
set in the multifunction display
( page
28)
.

43 Audio
Radio operation
Tuning via Autostore presets The Autostore function allows placing of
stations into the presets sorted by recep
-
tion quality
( page
46)
.
The system will store the station with the
strongest signal in preset
1.
Ten presets each are available for FM and
AM.
Switch to the desired waveband ( page
40)
.

Press the
Autost.
soft key.
The Autostore preset list appears. It
can take several seconds until all fre
-
quencies are displayed.

Use

, 
, 
or

to choose a
preset and press

;
or
Press one of the number keys

3
- "
.
The system tunes to the station stored
under this number.
Tuning via scan search Scan search is characterized as follows:
Scan search performs two runs.

During the first run, stations with ex
-
tremely good reception are played.

During the second run, stations with
weaker reception are played.

Scan search plays each receivable sta
-
tion for approx. 8 seconds.

Scan search can be ended manually.

Scan search automatically stops at the
station listened to before the scan
search was started.
Starting scan search 
Switch to the desired waveband ( page
40)
.

Press the
Scan
soft key.
Scanning begins.


44 AudioRadio operationEnding Scan search manually
Press the
Scan
soft key again.
Manual tuning 
Switch to the desired waveband ( page
40)
.

Press
-
or
,
for at least 2
seconds to scroll up or down.
Manual tuning is activated.

Keep the button pressed or release it
and keep tapping
-
or
,
in
quick succession.
The frequency will change by the tuning
increments for the respective wave
-
band each time one of the buttons is
pressed or for as long as a button is
pressed and held.

Manual tuning is deactivated if no but
-
ton is pressed for approx. 3 seconds.
Tuning via direct frequency input Entry example:

98.5 MHz in FM waveband
Switch to the FM waveband ( page
40)
.

Press
2
.
The frequency input display appears.
The frequency range of the FM wave
-
band is shown.
iManual tuning is also possible in all
wavebands by pressing

or 
.
The frequency will change by the tuning
increments for the respective wave
-
band each time one of the buttons is
pressed.Frequency increments for manual

tuning:
FM
0.2 MHz

AM
10 kHz

45 Audio
Radio operation

Press the number buttons in
succession:
!
,
, and

.
Each number entered appears in the
display.

The system tunes to the frequency en
-
tered (in this example: 98.5 Mhz) and
switches back to the FM menu.
Seven channels are available on the
Weather Band.

Switch to the WB waveband by press
-
ing the
WB soft key in the Radio main
menu
( page
40)
.
Each time you press the
WB soft key the
system will tune to the strongest re
-
ceivable station.
Tuning via station search On the COMAND control unit
Switch to the WB waveband by press
-
ing the
WB soft key in the Radio main
menu
( page
40)
.
The system will tune to the strongest
receivable station.

Press
-
or
,
.
The search begins descending or as
-
cending.The search stops at the next receivable
station.
On the multifunction steering wheel 
Switch the multifunction display in the
instrument cluster to Audio display ( page
27)
.

Press
j or
k.
The search stops at the next receivable
station.
Tuning via station presets
The seven strongest channels are sort
-
ed in preset 1 to 7 each time you press
the WB soft key. They are accessed us
-
ing the number keypad.

Press one of the number keys

3
- 
.
The system tunes to the station stored
under this number.
iEntries outside the frequency range are
not possible.Within the AM waveband, the input is
restricted to frequencies within the re
-
spective frequency increment, which
is10 kHz.The system will select the nearest valid
frequency if a frequency outside the
frequency increment is entered.Tuning to a station on Weather Band

46 AudioRadio operationTen presets each are available for the

FM and AM waveband.The following options are available:
Storing manually using number keys

Storing manually using the Presets
menu

Storing using Autostore
( page
46)
Storing manually using the number

keys
3
- "

Tune to the station to be stored ( page
41)
.

Press a number key between
3
and
"
and hold it for more than 2 sec
-
onds.The station is now stored in the respec
-
tive memory location.
Storing manually using the Presets
menu 
Tune to the station to be stored ( page
41)
.

Press the
Presets
soft key.
The Presets menu appears.

Use

, 
, 
or

to select a
preset.

Press

for more than 2 seconds.
The station will be stored in the respec
-
tive memory location.
Storing using Autostore The Autostore function places stations into
the Autostore memory sorted by reception
quality.

The system stores the station with the
strongest signal in preset
1.

Switch to the desired waveband ( page
40)
.

Press the
Autost.
soft key.
The Autostore preset list appears.
Storing FM/AM stations
iThe Autostore feature stores presets in
a separate memory, not in the regular
presets seen under the
Presets
soft
key. As such, the Autostore memory is
only temporary.

50 AudioSingle CD operation
Insert a CD into the CD slot while
COMAND is switched ON. Insert the
CD face up.COMAND pulls in the CD. If the CD is
an audio CD, the system switches to
Single CD mode and starts playing the
first track.

Press
7
.
COMAND ejects the CD.

Remove the CD from the slot.If you do not remove the CD from the
slot within approx. 7 seconds, the CD is
pulled back into the CD drive.

Open the Audio main menu ( page
38)
.

Press the
CD soft key.
The system switches to Single CD
mode and starts playing the first track.The center of the status bar shows:
The track number and total number
of tracks

The elapsed playing time of the
track
1Track title or track number2Elapsed track playing time3Track number/total tracks The Single CD main menu shows the track
title in the center if the CD contains corre
-
sponding text data.If the CD does not contain any CD text da
-
ta, the track number is displayed instead of
the track title.
iIf the CD is an MP3 CD, the system
switches to MP3 mode
( page
57)
.
Ejecting a CD
Single CD main menuiThe
CD
soft key is shaded out if no CD
is loaded. The system will not switch to
Single CD mode.

Load an audio CD into the
COMAND CD drive
( page
49)
The
MP3
soft key instead of the
CD soft
key is visible when a MP3 CD has been
inserted.

52 AudioSingle CD operationSelecting via manual entry of the track
number 
Open the Single CD main menu ( page
50)
.

Press
2
.
The Manual track input display ap
-
pears.
1Number of tracks on the CD (12 tracks)Entry example: Track 1
Press
3
.
Entry example: Track 12
Press
3
and

in quick succession.

Wait approx. 3 seconds after entering
the number.The selected track is played. The CD
main menu appears.
Selecting via scan search Scan search is characterized as follows:
Scan search plays each track on the
current CD for approx. 8 seconds.

Scan search can be ended manually.

Scan search automatically stops at the
track listened to before the scan
search was started.
Starting scan search 
Press the
Scan
soft key.
Ending scan search manually 
Press the
Scan
soft key.
The track playing at the time the scan
is ended remains playing.

Open the Single CD main menu ( page
50)
.

Press and hold
-
or
,
.

To stop release
-
or
,
.
iEntries beyond the number of available
tracks on the CD are not possible.
iWhen you start the scan search, play
-
back option
Normal Sequence
( page
53)
is activated automatically.
Fast forward/reverse

53 Audio
Single CD operation
The following options are available:
Normal
sequence


Repeat
track

Random
track
Explanation of the playback options 
Normal
sequence
The tracks are played in the normal se
-
quence (e.g. track 1, 2, 3 etc.).The last track is followed by the first
track of the CD.

Repeat
track

The current track will be repeated until
this function is deactivated.

Random trackThe tracks are played in random order
(e.g. track 3, 8, 5 etc.).
Changing the playback option 
In the Single CD main menu ( page
50)
press the
Setting
soft
key. The Settings menu is displayed.

The solid circle
indicates which op
-
tion is currently selected.

Press
 or  to select a different
option.

Press
.
The option is activated. A correspond
-
ing display will appear in the status bar
for all options except Normal
sequence
.
An option will remain activated even if
COMAND is switched OFF and then ON
again.
Playback options