140 Navigation*During route guidance1Estimated time of arrival2Remaining driving time in hours and
minutes3Remaining journey (distance)1, 2 and 3 refer to the stop-over desti
-
nation. You'll only see the details for the fi
-
nal destination when you arrive at your
stopover and the system has calculated
the route to the main destination.
Selectable soft keys
Route
soft key:
Provides access to the display of the
route on the map,
Mode
soft key:
Provides access to the setting of the
route mode
( page
113)
.
In the Info menu, press the
Route
soft
key.
The map appears. The route remaining
is highlighted in blue. The destination is marked with a flag , any stop-over destination is marked with a flag
. The current vehicle posi
-
tion is identified with the
symbol.
Depending on the distance to the des
-
tination, it may take some time before
the route display appears.
iThe estimated time of arrival does not
refer to the time zone of destination,
but always refers to the time zone of
the vehicle's current location. For a
correct calculation, make sure that the
system clock is set correctly ( page
166)
.
Displaying the route on the map
s
166 SystemSystem settings
Press
.
The System menu appears.
Selectable soft keys
Time
soft key
For setting the date and time
Lang.
soft key
For setting the language
( page
168)
Tones
soft key
For switching confirmation beeps
and acoustic signals ON and OFF ( page
168)
Display
soft key
For changing the display settings ( page
169)
Reset
soft key
For resetting COMAND to the factory
settings
( page
170)
Press the
Time
soft key.
The Date/Time setting menu appears.
The following options are now available:
Setting the time
Setting the date
Setting the date/time format
Setting the time The UTC time transmitted by the GPS sat
-
ellites has to be set to the local time zone.
This enhances:
correct navigation for routes with time-
dependent traffic guidance, and
correct calculation of the estimated
time of arrival.
Calling up the System menu
Setting the date/time
iThere is no automatic change from day
-
light saving time to standard time.
This has to be changed manually.When you change the time zone, the
clock time also changes automatically.
If you enter an incorrect time, the time
difference remains unchanged when
you change time zone.
