Where will
Ifind...? 200 Where will
Ifind...? Warning triangle
The warning triangl eislocated in the boot
behind the left trim. 1
Locking button
Removin gthe warning triangle X
Turn locking button 190° anti-clockwise.
X Fold the cover to the left.
X Remove the warning triangle. Setting up the warning triangle 1
Retainer
2 Side reflectors
3 Feet
X Fold feet 3dow nand ou ttothe side.
X Pull sid ereflectors 2upwards to form a
triangle and lock them at the top using
retainer 1. Vehicl
etoolkit, jack, TIREFI Tkit and
spare wheel*
The vehicle tool kit, TIREFIT kit, jack and
emergency spare wheel are in astowage
space under the luggage compartment floor. G
Risk of injury
The jack is designe donly to raise and hold
the vehicle for ashort time whileaw heel
is being changed.
If yo uare carrying ou tworkont he vehicle,
yo um ustu se stands.
Make sure that the jack is place donafirm,
non-sli pand level surface .Donot use
woode nblocks or similar objects as ajack
underlay .Otherwise, the jack will not be
able to achiev eits load-bearing capacity
du etot he restricted height.
Do not start the engine at any time whilea
wheel is being changed.
i Whe nusing the jack, yo ushoul dalso
observe the safety notes in the "Flat tyre"
section (Y page 266). Practical advice
*optional
230_AKB; 5; 4, en-GB
bjanott,
Version: 2.9.6 2008-04-08T15:09:54+02:00-Seite 200 Dateiname: 6515_3089_02_buchblock.pdf; preflight
Flat tyre
271The vehicl
emustbep laced on stand sifyou
intend to wor kunder it.
Mak esuret hatthe jackisp laced on afirm,
non-slip ,level surface. Do no tuse wooden
blocks or similar items as jacking supports.
Otherwise ,the jackw ill no tbea ble to ach-
iev eits load-bearin gcapacity due to the
restricted height.
Do no tstart th eengineata ny time while
th ew hee lisb eingchanged. G
Risk of accident
If you fail to position th ejackc orrectly,t he
vehicl emay:
R slip of fthe jack
R injur eyou or others
R be damaged
It is thus important to ensur ethatthe jack
is positioned correctl yint he respective
jacking points .Befor epositionin gthe jack,
remove any dir ttha tm ay hav ecollecte din
th ej acking points.
The jacking sockets are locate dbehin dthe
whee lhousings of th efront wheels and in fron
toft hewhee lhousings of th erear
wheels. Example standar
dvehicle
1 Cap for jackin gsocket Example AMG vehicle
1
Cap for jackin gsocket X
Standar dvehicles: pressthe cover firmly
in th edirectio nofarrow1and pry off the
cover with asuitable object ,e.g.a screw-
driver.
X AMG vehicles: pry off cover1from
underneat hwithasuitable object ,e.g.a
screwdriver.
X All vehicles: remove cover 1.Make sure
th el ug does not break off. 1
Jacking pin
2 Jacking socket
3 Crank
X Push jackin gpin1 as far as it will go into
jackin gsocket 2. Practical advice
230_AKB
;5;4,en-GB
bjanott, Version:2.9.6
2008-04-08T15:09:54+02:00
-Seite 271 ZDateiname: 6515_3089_02_buchblock.pdf; preflight
