Flat tyre
271The vehicl
emustbep laced on stand sifyou
intend to wor kunder it.
Mak esuret hatthe jackisp laced on afirm,
non-slip ,level surface. Do no tuse wooden
blocks or similar items as jacking supports.
Otherwise ,the jackw ill no tbea ble to ach-
iev eits load-bearin gcapacity due to the
restricted height.
Do no tstart th eengineata ny time while
th ew hee lisb eingchanged. G
Risk of accident
If you fail to position th ejackc orrectly,t he
vehicl emay:
R slip of fthe jack
R injur eyou or others
R be damaged
It is thus important to ensur ethatthe jack
is positioned correctl yint he respective
jacking points .Befor epositionin gthe jack,
remove any dir ttha tm ay hav ecollecte din
th ej acking points.
The jacking sockets are locate dbehin dthe
whee lhousings of th efront wheels and in fron
toft hewhee lhousings of th erear
wheels. Example standar
dvehicle
1 Cap for jackin gsocket Example AMG vehicle
1
Cap for jackin gsocket X
Standar dvehicles: pressthe cover firmly
in th edirectio nofarrow1and pry off the
cover with asuitable object ,e.g.a screw-
driver.
X AMG vehicles: pry off cover1from
underneat hwithasuitable object ,e.g.a
screwdriver.
X All vehicles: remove cover 1.Make sure
th el ug does not break off. 1
Jacking pin
2 Jacking socket
3 Crank
X Push jackin gpin1 as far as it will go into
jackin gsocket 2. Practical advice
230_AKB
;5;4,en-GB
bjanott, Version:2.9.6
2008-04-08T15:09:54+02:00
-Seite 271 ZDateiname: 6515_3089_02_buchblock.pdf; preflight
