2008 MERCEDES-BENZ S550 4MATIC voice command

Contents
COMAND automatic climate control.. 251
Setting temperature ..................... 252
Adjusting air distribution .............. 253
Adjusting air volume .................... 253
Central climate control menu via
COMAND ..................................... 254
Operating rear climate control*
from the front............................... 257
COMAND seats.................................. 259
Operating seats via COMAND ...... 259
Lumbar support............................ 260
Multicontour seats*, front............ 260
Drive-dynamic
multicontour seats*, front............ 262
Instrument cluster control system ..... 264
Multifunction display .................... 264
Multifunction steering wheel ........ 265
Menus .......................................... 266
Trip menu ..................................... 268
Navi menu .................................... 269
Audio menu .................................. 271
AMG menu ................................... 273
Telephone* menu......................... 276
Assistance* menu ........................ 279
Service menu ............................... 280
Settings menu .............................. 281Voice Control*.................................... 284
Operating safety ........................... 284
Voice Control* introduction ............... 285
Spelling ......................................... 286
Command types ............................ 286
Active System ............................... 286
Controls ........................................ 287
Symbols ........................................ 288
Voice Control* telephone ................... 289
Telephone operation ..................... 289
Telephone commands ................... 290
Voice Control* navigation .................. 296
Important notes ............................ 296
Navigation operation..................... 297
Navigation commands .................. 297
Dialog for entering a
complete address ......................... 298
Commands for entering parts of
an address .................................... 303
Voice Control* address book ............. 306
COMAND address book
overview ....................................... 306
Operation with address book not
open (global) ................................. 306Operation with address book
open (local) ................................... 306
Operating and using address book 306
Available commands with the
address book not open ................. 307
Available commands with the
address book open ....................... 308
Voice Control* radio .......................... 309
Radio operation ............................ 309
Radio commands .......................... 309
Voice Control* CD/
DVD changer/MP3............................. 313
Operation...................................... 313
Commands ................................... 313
Voice Control* command list ............. 315
Command list ............................... 315
Voice Control* troubleshooting.......... 327
Help function ................................ 327
Help commands............................ 327
Help window ................................. 327
Entering digits and spelling........... 327
What to do if ... ............................. 328
Voice Control* individualization ......... 330

237 Control systems
COMAND system settings
Setting the time/date format
Select “Vehicle”
“System Settings”

“Time”
“Format”.
The format list appears. The dots R in
front of the list entries indicate the cur-
rent setting.
Changing format setting:
Select desired format.
Saving setting and exit the menu:
Slide omp.
Voice Control* settings
Switching help window on or off
Select “Vehicle”
“System Settings”

“Voice Control”.
Select “Help Window”.
You can switch the help window on or
off. A checkmark appears when the
help window is switched on.Individualization
Using individualization, you can fine-tune
Voice Control* to your own voice and thus
improve voice recognition. The ability of
the system to recognize the commands of
other users does not deteriorate as a re-
sult.
Individualization consists of two parts. You
train the system to recognize digits in the
first part and specific commands in the
second part.
Starting new individualizationSelect “Vehicle”
“System Settings”

“Voice Control”
“Start new indi-
vidualization”.
A prompt appears asking whether you
would like further information.
Select “Yes” or “No”.
If you select “No”, the first part of indi-
vidualization begins.
If you select “Yes”, an information dis-
play will be shown with audio instruc-
tion.
Closing display: Select “OK”.
The first part of individualization be-
gins.
At the end of the first part, you will see
a prompt asking whether you want to
begin the second part.
Select “Yes” or “No”.
If you select “No”, individualization will
be canceled. The data from the first
part is saved automatically.
If you select “Yes”, the second part be-
gins.
Individualization is completed at the end of
the second part. You will see a message to
this effect. The data from the second part
is saved automatically.iIt is only possible to start individualization
with the vehicle stationary. After starting the
session, the system will guide you through the in-
dividualization by means of acoustic instruc-
tions.

238 Control systems
COMAND system settings
Canceling during the first or second part
of individualization
Select “Cancel”.
A prompt appears asking whether you
really do want to cancel.
Select “Yes” or “No”.
If you select “Yes”, individualization will
be canceled. The data from the part at
which you exited is not saved.
If you select “No”, the part at which you
stopped begins again.
Deleting existing individualization data
Select “Vehicle”
“System Settings”

“Voice Control”
“Delete individu-
alization”.
A prompt appears asking whether you
really do want to delete.
Select “Yes” or “No”.
The individualization data will either be
deleted or not, depending on your se-
lection.
Setting the system language
Select “Vehicle”
“System Settings”

“Language”.
The language list appears. A dot R in-
dicates the current setting.
Changing setting: Select desired lan-
guage.
The language is set.
Assigning the favorite button
1Favorite buttonYou can assign the following predefined
functions to the favorite buttonP:

“Rear Window Sunshade” (page 503)
You can use the favorite button to ex-
tend or retract the rear window sun-
shade. This is the default setting.

“Display OFF” (page 235)
You can use the favorite button to
switch the COMAND display on or off.

“Repeat Navigation Command”
(
page 213)
You can use the favorite button to re-
call the last announcement issued by
the navigation system.
Select “Vehicle”
“System Settings”

“Favorite”.
The list of predefined functions appears.
The dot R in front of the list entry indi-
cates the current setting.
Changing setting: Rotate ymz and
select desired function.
Saving setting and exit the menu:
Press n.

285 Control systems
Voice Control* introduction
Voice Control* introduction
The Voice Control System gives you the ca-
pability to control the following systems on
your vehicle using spoken commands:

Telephone* (page 289)

Navigation (page 296)

Address book (page 306)

Audio (page 309) (AM/FM radio,
CD/DVD changer, MP3 player)You control these systems using spoken
commands. Moreover, controls such as
the buttons on the multifunction steering
wheel (
page 287) allow you to keep your
hands on the steering wheel.
The command vocabulary consists of
approximately 300 ready to use phrases.
The Voice Control System recognizes com-
mands and number sequences, irrespec-
tive of the speaker. To optimize speech
recognition for your voice follow the indi-
vidualization process (
page 330).
You can use the Voice Control System to
call up all of COMAND’s main menu items,
with the exception of the main menus for
“Vehicle” and “Navi”.The commands and digit sequences can be
spoken without pausing between the indi-
vidual words. If an unavailable or incorrect
command is used, the Voice Control Sys-
tem will prompt you for a new command by
asking “Please repeat” or “Please repeat
your entry”.
In order to provide for a safe and comfort-
able dialog, the Voice Control System ac-
knowledges important commands.

286 Control systems
Voice Control* introduction
Spelling
You may not need to spell the entire name
(street, intersection, city or point of inter-
est) especially if the name is lengthy. Spell-
ing the first three to five characters of the
name should be sufficient for the system
to recognize the name provided it is avail-
able on the navigation DVD.
The selection appearing on the COMAND
display is sorted based on your recognized
voice input and a matching algorithm.
You can use the commands “Next page” or
“Previous page” to scroll up or down in the
list.
Use the command “Correction” to start
over by again spelling the name.
Speak each character as clearly as you
can, especially when they sound very simi-
lar (d or e).Command types
The Voice Control System commands can
be categorized as:

General Commands
These are commands always available
to you as soon as the Voice Control
System is activated (for example
“Help” commands).

Local Commands
These are commands specific to the
currently active system shown in the
COMAND display (for example com-
mands to control the CD/DVD chang-
er).
For a complete list of commands
(
page 315).
Active System
The active system is the system currently
shown in the COMAND display.
If, for example, you listen to the radio while
the telephone system is active on the
COMAND display, you have to switch to
the radio using the command “Radio” be-
fore you can operate the radio.
iDuring Voice Control System operation visu-
al help windows also appear in the COMAND dis-
play (
page 288).

287 Control systems
Voice Control* introduction
Controls
Operation via the multifunction
steering wheelActivating Voice Control
Switch on COMAND (page 85).
Press !.
An audible tone (beep) confirms the ac-
tivation of the system.
Speak a command.
Canceling Voice Control
Press L.
or
Speak the command “Cancel”
(except for speaking voice entries, en-
tering a town or city or carrying out in-
dividualization).
or
Press any COMAND button.
Item
1!to activate Voice Control
to accept a call
2Lto cancel Voice Control
3æto increase volume
çto decrease volume
sto take a call
to dial
to redial
tto end a call
to reject an incoming call
iVoice Control can be cancelled at any time,
even during a dialog. Please note that if the Voice
Control System is cancelled during a dialog, then
the complete procedure is stopped and Voice
Control is cancelled.

288 Control systems
Voice Control* introduction
Setting volume level
Activate Voice Control.
Speak a command, for example “Help”.
Pressæ orç. The volume is in-
creased or decreased during voice out-
put.
or
Set volume for voice output using the
COMAND volume thumbwheel on the
lower part of the front center console
(
page 96).
Displays
COMAND Display
In addition to the acoustic help function,
a visual help function (
page 237) is avail-
able on the COMAND display.
Upon activating the Voice Control, the
most important available commands for
the currently active system appear on the
COMAND display.When the Voice Control System requires
additional information from the user, a se-
lection list is shown on the COMAND dis-
play in the address book and navigation
system.
1COMAND display
Multifunction display
For example: telephone numbers are
shown on the multifunction display while
dialing when the main “Telephone” menu
is selected in the instrument cluster con-
trol system.1Multifunction display
Symbols
The following symbols are found in follow-
ing Voice Control System pages:
sThis symbol stands for commands
and voice entries you are speaking.
tThis symbol stands for voice output
by the system.
uThis symbol indicates that informa-
tion is available on the COMAND
display.

290 Control systems
Voice Control* telephone
The Voice Control System detects whether

your telephone is switched on

the corresponding mobile network is
logged in

it is possible to dial
If dialing is not possible, the Voice Control
System will advise you accordingly.
Before you can operate the telephone us-
ing the Voice Control System, you have to
activate the Voice Control (
page 287).
Telephone commands
For a complete list of commands
(
page 315).
“Telephone”Use the command “Telephone” to activate
the telephone main menu. Use this com-
mand if you want the digits you are enter-
ing to appear on the COMAND display.
“Help telephone”
The Voice Control System features a com-
prehensive help function.
Use the command “Help telephone” and
the Voice Control System will read out an
option list of available functions and com-
mands that can be used in conjunction
with the telephone (
page 237).
“Enter PIN”
Use the command “Enter PIN” to input the
code to unlock your telephone. After
speaking the command, you are prompted
to enter the code.
Speak the code

as a continuously spoken string of dig-
its, or

in digit blocks of three to five digits.
Digits from “Zero” to “Nine” may be used.
After each digit block (separate the digit
blocks by using an approximately
0.5 second pause), the Voice Control Sys-
tem repeats the recognized digits and
waits until you continue speaking.
Sample dialog:
sEnter PIN
tPlease say the PIN
sZero zero one one
tZero zero one one
sOK
iYou can continue operating your mobile
phone using the telephone keypad or keypad on
your phone.
iThe PIN (only GSM mobile phones) prompt
starts automatically whenever the phone is
locked and you wish to use it.