159 Control systems
COMAND navigation (introduction)
COMAND navigation (introduction)
Map software
The digital maps generated by the map
software become outdated in the same
way as conventional road maps. Optimum
route guidance can only be provided by the
navigation system in conjunction with the
most up-to-date map software.
Information about new map software ver-
sions can be obtained from an authorized
Mercedes-Benz Center.
Updating the map software
You can update the map software yourself
using a DVD.
Notes about handling DVDs
Only hold discs by the edge.
Handle discs carefully to prevent read
problems.
Avoid getting scratches, fingerprints
and dust on discs.
Use a commercially-available cleaning
cloth to clean discs. Do not wipe them
with a circular motion, but only in
straight lines from the center out-
wards.
Place discs back in their boxes after
use.
Protect discs from heat and direct sun-
light.
Updating process
The updating process has the following
phases:
Loading a DVD into the DVD changer
(
page 160)
Updating process (page 160)
iThe updating process can take between
10 and 60 minutes, depending on the size of the
map software. If the radio was switched on be-
fore you started the updating process, you can
still adjust the volume. You can also use
COMAND to operate the automatic air condition-
ing and to cancel the process. Other functions
are not operational.
If possible, carry out the update when the vehicle
is stationary.
iIf you carry out the update with the engine
switched off and the vehicle battery has insuffi-
cient power, COMAND may automatically switch
off during the process in order to protect the bat-
tery. If this occurs, restart the update with the
engine running period. Similarly, if the SmartKey
position is unintentionally switched to 0, restart
the update.
Warning!G
Never leave the engine running in an en-
closed space. The exhaust gases contain
carbon monoxide. Inhaling exhaust gases
constitutes a health hazard and could lead
to loss of consciousness or even death.
737 Index
B
Backup lamps
Replacing bulbs 679
Bar 576
BAS 68
Batteries, SmartKey
Checking battery condition 340
Replacing 676
Batteries, SmartKey with KEYLESS-GO*
Checking battery condition 340
Replacing 676
Batteries, vehicle 692
Charging 695
Discharged, Jump starting 697
Disconnecting 694
For electrical consumers 692
For starter 692
Message in display 644
Reconnecting 696
Removing 695
Bead 576
Beverage holder see Cup holder
Bluetooth
®
Settings (COMAND) 239Brake assist system (BAS Plus) 69
Brake assist system (BAS) 68
Brake fluid 540, 725, 728
Brake lamp bulbs 679
Brake lamp, high mounted 679
Brake pads
Message in display 632
Brake warning lamp 29
Brakes 528
High-performance brake system
(AMG vehicles only) 529
Warning lamp 29, 599
Break-in period 526
Bulbs, replacing 678
Additional turn signals 679
Brake lamps 679
Fog lamps 679
Front lamps 679
High beam 679
High mounted brake lamp 679
License plate lamps 679
Low beam 679
Parking and standing lamps 679
Rear fog lamp 679
Turn signal lamps 679C
California retail buyers and lessees,
important notice for 15
Can holder see Cup holder
Capacities and recommended
fuel/lubricants 724
Cargo area see Trunk
Cargo tie-down hooks 500
Carpets, Cleaning and care of 594
Catalytic converter 536
CD
Ejecting (COMAND) 117
Loading (COMAND) 115
Menu overview (COMAND) 119
Playback options (COMAND) 123
Selecting a medium (COMAND) 121
Selecting a track (COMAND) 122
CD (COMAND) 112
Central locking
Automatic 342
Locking/unlocking from inside 343
Central locking/unlocking switches 343
Certification label 712
Change of address or ownership 16
