2008 MERCEDES-BENZ S-Class Bluetooth

Contents
Back to the film ............................ 139
Setting the language and
audio format ................................ 139
Subtitles and camera angles ........ 140
Interactive content ....................... 140
COMAND telephone* ........................ 141
Safety precautions ....................... 141
General notes............................... 141
Switching telephone on or off ...... 143
Activating telephone mode .......... 144
Telephone keypad ........................ 144
“911” emergency call................... 145
Entering the PIN ........................... 146
Entering the PIN2 ......................... 147
Entering the PUK/PUK2............... 147
Entering the unlock code ............. 147
Telephone submenu overview ...... 148
Main telephone menu .................. 149
Mailbox ........................................ 149
Call lists ....................................... 150
Incoming call ................................ 152
Making an outgoing call ............... 153
Functions during a single-call
connection ................................... 155
Transferring a call ........................ 157
COMAND phone book .................. 158COMAND address book ................ 167
Bluetooth
® settings....................... 180
SMS messages
(Short Message Service) ............... 183
COMAND navigation ........................... 187
Safety precautions ........................ 187
COMAND navigation (introduction) .... 188
Map software ................................ 188
Updating the map software........... 188
Updating process .......................... 188
Loading a DVD into the
DVD changer................................. 189
Updating ....................................... 190
General notes ............................... 192
Input restrictions .......................... 193
Navigation system menu overview 194
Calling up the map display and
switching to navigation mode ....... 195
Basic settings ............................... 198
COMAND navigation system
(entering a destination) ...................... 202
Entering a destination by the
address ......................................... 202
Entering a destination from the
destination memory ...................... 223Entering a destination from the
list of last destinations.................. 225
Entering a destination
from the map ................................ 225
Entering a stopover....................... 226
COMAND navigation system
(Point of interest entry) ...................... 229
Entering a POI in the
surrounding area .......................... 229
Entering a POI in the
surroundings of a given city .......... 229
Entering a POI in
a different region .......................... 229
Designating a POI category........... 230
Entering a POI from the map ........ 236
COMAND navigation system
(route guidance) ................................. 237
Route guidance ............................. 237
Examples of displays and
announcements for
a driving maneuver ....................... 237
Example of a display
without driving maneuvers............ 239
Destination or destination area
reached ........................................ 239
Partially digitized areas ................. 240

18 IntroductionSymbolsTrademarks:

Bluetooth
® is a registered trademark of
of Bluetooth SIG Inc.


ESP
® and PRE-SAFE
® are registered
trademark of DaimlerChrysler.


HomeLink
® is a registered trademark
of Prince, a Johnson Controls
Company.


LOGIC7
® is a registered trademark of
Harman International Industries, Incor-
porated.


SIRIUS and related marks are trade-
marks of SIRIUS Satellite Radio Inc.The following symbols are found in this
Operator’s Manual:
* Optional equipment is identified
with an asterisk. Since standard
equipment varies between models,
the descriptions and illustrations in
this manual may differ slightly from
the actual equipment of your vehi-
cle.

This symbol points to instructions for
you to follow.

A number of these symbols appearing
in succession indicates a multiple-step
procedure.
 page This symbol tells you where to
look for further information on a
topic.
This continuation symbol marks
a warning which is continued on
the next page.

This continuation symbol marks
a procedure which is continued
on the next page.
-> This symbol is used to indicate
cross-references to term defini-
tions.
DisplayWords appearing in the multi-
function display and COMAND
display are printed in the type
shown here.
Warning!
G
Warning notices draw your attention to haz-
ards that may endanger your health or life,
or the health or life of others.!
Highlights hazards that may result in dam-
age to your vehicle.
i
Helpful hints or further information you may
find useful.

142 Control systemsCOMAND telephone*Operating options
When the mobile phone is inserted in the
cradle, you can operate the telephone us-
ing the following devices:

mobile phone keypad


COMAND telephone keypad


buttonss andt on the multi-
function steering wheel (
page 288)


Voice Control (
page 313)


Bluetooth
® headset (
page 157)Please note that these functions are only
available with Mercedes-Benz approved
mobile phones. Please contact an autho-
rized Mercedes-Benz Center for informa-
tion on features available for your mobile
phone of choice.
You can control other functions of the mo-
bile phone via the COMAND, instrument
cluster control system (
page 299) or
Voice Control.
The descriptions in this section assume
that the mobile phone is inserted in the
cradle. Exceptions to this are clearly stat-
ed.Unless otherwise indicated, the descrip-
tions and illustrations in this section refer
to COMAND and the telephone keypad.
Operation using the mobile phone and
Bluetooth
® headset is described in the re-
spective separate Operating Instructions.
Caller ID
COMAND can display the telephone num-
ber and the name of the caller, e.g. for an
incoming call and also in other menus or
displays.
For the telephone number to be displayed,
the caller must transmit their telephone
number.
This is also the case for name displays. For
this, the telephone number and the name
of the caller must also be saved in the mo-
bile phone book.
i
The components and operating principles of
COMAND can be found on (
page 87) and
(
page 96).
i
Various mobile phone cradles can be in-
stalled in the front center armrest, see separate
installation instructions for the mobile phone
cradle. These mobile phone cradles can be ob-
tained from an authorized Mercedes-Benz Cen-
ter. For more information about telephone
(
page 539).
i
In order for the functions described in this
section to work correctly, the Bluetooth
® head-
set must be linked to COMAND (
page 180).
Please make sure any Bluetooth
® headset linked
with the mobile phone is switched off or that the
headset is linked with COMAND before you in-
sert the mobile phone in the cradle (page 539)
and use the telephone functions with COMAND.

143 Control systems
COMAND telephone*
Functional restrictions
You will not be able to use the telephone,
or you may have to wait a while, in the fol-
lowing situations:

If the telephone has not yet logged into
the network.
The telephone automatically tries to
log into a network. If no network is
available, you will also not be able to
make a “911” emergency call.
If you attempt to make an outgoing call,
the “No Service” message will appear
for a short while.


If the mobile phone is not inserted in
the cradle.


SIM card is not inserted in GSM type
phone.Notes about COMAND telephone fea-
tures using a Bluetooth
® connection
Many of the Mercedes-Benz approved mo-
bile phones, cradles and adaptors avail-
able for use in your vehicle utilize
Bluetooth
® technology to communicate
with each other and the vehicle. Depend-
ing on your phone brand and model, the
number of in-vehicle or on-display
COMAND telephone features supported
via Bluetooth® communication, and thus
available for your use, may vary.
The descriptions and illustrations in this
section are based on the use of fully com-
patible Mercedes-Benz approved mobile
phones and cradles that do not utilize Blue-
tooth
® technology to communicate with
each other. If your vehicle is equipped with
integrated Bluetooth
® functionality than a
Bluetooth
® capable mobile phone, head-
set, Laptop, PDA, etc. is required to utilize
those features.For additional information about
Mercedes-Benz approved Bluetooth
® mo-
bile phones and related accessories please
contact the Mercedes-Benz Customer As-
sistance Center at 1-800-FOR-MERCedes
or your nearest authorized Mercedes-Benz
Center.
Switching telephone on or off
Switching on: Insert mobile phone
into cradle when COMAND is switched
on.
or

Switch on the mobile phone
(see mobile phone operating instruc-
tions).

Switching off: Select “Telephone”

“Telephone”
“Telephone OFF”.
or

Switch off mobile phone (see mobile
phone operating instructions).
i
The roof cargo container* may impair mo-
bile phone reception. In an emergency, remove
the mobile phone from the mobile phone cradle
(
page 539) to make a call.

148 Control systemsCOMAND telephone*Telephone submenu overviewi
The components and operating principles of
COMAND can be found on (
page 87).
Name
(only when the mo-
bile phone is insert-
ed in the cradle)
Data/Connections
Call lists
(not during a call)
Text message
(not during a call)
DTMF
(only during a call)
Mic OFF/ON
(only during a call)
Display COMAND
phone book


Address book


Bluetooth
®
Display call list se-
lection:

Calls received


Calls dialed
Call up SMS inbox
Send numerical se-
quence
Switch hands-free
microphone on/off

153 Control systems
COMAND telephone*

Use the Bluetooth
® headset
(see headset operating instructions).
If you have accepted the call using
COMAND, the telephone keypad, the mul-
tifunction steering wheel or the mobile
phone, the call will be conducted via the
hands-free system. The volume of the call
can be adjusted (
page 98).
If you have accepted the call using the
Bluetooth
® headset, the call will be con-
ducted via the headset.
Further operating functions can be found
in the “Functions during a single-call con-
nection” section (
page 155).
You can also accept a call if the
COMAND display is showing a screen oth-
er than the telephone mode screen. After
accepting the call, you will see the caller’s
data in a window.

Closing window: Slide qmr oromp
or press n.
Making an outgoing call
Entering the telephone number using
the COMAND controller
Switching screen to telephone
mode: Call up main telephone menu
(page 149).

Entering digits: Select desired digits
by rotating ymz or sliding omp and
press n.

Deleting individual digits: Select )
and briefly press n.

Deleting an entire telephone num-
ber: Select ) and press and hold n
until the telephone number is deleted.

Connecting a call: Select “S”.
Entering a telephone number using the
telephone keypad

Switching screen to telephone
mode: Call up main telephone menu
(page 149).

Use telephone keypad to enter digits.

Connecting a call: Press s.
i
The use of a Bluetooth
® headset requires
Bluetooth
® to be activated and the Bluetooth
®
headset to be authorized (
page 180).
i
If you place an outgoing call and receive a
busy signal, the telephone automatically starts
to redial as long as the provider and the mobile
phone support this function (see mobile phone
operating instructions).
While the call is connecting, you can also send
character strings (
page 156).
i
A detailed description of how to enter digits
using the telephone keypad can be found on
(
page 90).

157 Control systems
COMAND telephone*

Sending a phone book entry as a
character string: Select “Name”.

Select desired phone book entry.
The entry is immediately sent as a char-
acter string.

Switching back to the call display:
Select “Y”.
Sending character strings via the tele-
phone keypad

Press corresponding button on tele-
phone keypad.
Each character you select is immedi-
ately sent.Ending an active call

Ending a call: Select “4END” in the
call display.
or

Press t on the telephone keypad or
on the multifunction steering wheel.
The COMAND display will change to
the previously selected display, if
applicable.
Transferring a call
From the hands-free system to the
Bluetooth
® headset
The call transfer is controlled by pressing
the PTT button on the Bluetooth
® headset
(see headset operating instructions). Nor-
mally, it is sufficient to press the PTT but-
ton once, but under certain circumstances
you may have to press it a second time.
Once the call has been transferred to the
Bluetooth
® headset, all the functions will
be available to you which are described in
the “Functions during a single-call connec-
tion” section (
page 155).
Exception: “Switching the hands-free mi-
crophone on or off” function (
page 156).
i
Telephone numbers containing the + char-
acter may impair the function.
i
The + character may impair the function.
i
The use of a Bluetooth
® headset requires
Bluetooth
® to be activated and the Bluetooth
®
headset to be authorized (
page 180).

158 Control systemsCOMAND telephone*From the Bluetooth
® headset to the
hands-free system
On most Bluetooth
® headsets, you press
the PTT button on the headset twice quick-
ly to transfer the call (see headset operat-
ing instructions).
From the hands-free system to the mo-
bile phone

If the mobile phone has a folding up-
per section: Flip upper section open.

Take mobile phone out of cradle.
The “No telephone inserted” message
appears on the COMAND display. Sub-
sequent operation is only possible us-
ing the mobile phone.From the mobile phone to the
hands-free system

Insert mobile phone into cradle.
Once the call has been transferred to
the hands-free feature, all the functions
will be available to you which are de-
scribed in the “Functions during a sin-
gle-call connection” section
(page 155).
COMAND phone book
The COMAND phone book contains both
the COMAND address book entries and
mobile phone entries that have at least
one telephone number.
The COMAND address book entries are
permanently available even when a mobile
phone is not inserted in the cradle.
When the mobile phone is inserted in the
cradle, COMAND will read the phone book
entries in the mobile phone and compares
them with the COMAND address book en-
tries.