2008 MERCEDES-BENZ R320 check engine

[x] Cancel search: check engine

Page 445 of 569

MERCEDES-BENZ R320 2008 W251 Owners Manual 444 Practical hints
What to do if …
Symbol messages
Display symbolDisplay messagePossible cause/consequencePossible solution
òReplace air filter.The air filter is clogged.Have the air filter check

Page 448 of 569

MERCEDES-BENZ R320 2008 W251 Owners Manual 447 Practical hints
What to do if …
Display symbolDisplay messagePossible cause/consequencePossible solution
;(USA only)
3(Canada only)
Check
Brake Fluid LevelThere is insufficient brake fluid 
in t

Page 449 of 569

MERCEDES-BENZ R320 2008 W251 Owners Manual 448 Practical hints
What to do if …
Display symbolDisplay messagePossible cause/consequencePossible solution
•Coolant Level
Stop car, switch engine off.The coolant is too hot.
Among other possible

Page 451 of 569

MERCEDES-BENZ R320 2008 W251 Owners Manual 450 Practical hints
What to do if …
Display symbolDisplay messagePossible cause/consequencePossible solution
B Top Up Coolant
See Operator’s ManualThe coolant level is too low.Add coolant (page

Page 452 of 569

MERCEDES-BENZ R320 2008 W251 Owners Manual 451 Practical hints
What to do if …
When the message Check engine oil 
level at next refueling.
 appears while 
the engine is running and at operating tem-
perature, the engine oil level has dropped

Page 462 of 569

MERCEDES-BENZ R320 2008 W251 Owners Manual 461 Practical hints
What to do if …
Display symbolDisplay messagePossible cause/consequencePossible solution
4Reserve FuelThe fuel level has gone below the reserve 
mark.Refuel at the next gas stat

Page 505 of 569

MERCEDES-BENZ R320 2008 W251 Owners Manual 504 Practical hints
Battery
!The battery is a valve-regulated lead acid 
(VRLA) battery, also referred to as “fleece” 
battery. Such batteries do not require topping-up 
of the electrolyte level.

Page 506 of 569

MERCEDES-BENZ R320 2008 W251 Owners Manual 505 Practical hints
Battery
Disconnecting, removing, reinstalling 
and reconnecting the battery
Step 1 (Disconnecting)
Set the automatic transmission to 
positionP (
page 192).
Firmly depress the p