2008 MERCEDES-BENZ G55AMG mirror controls

Contents
Safety and Security........................... 67
Occupant safety................................... 68 Air bags .......................................... 70
Seat belts ....................................... 74
Children in the vehicle.................... 77
Blocking of rear door window
operation ........................................ 85
Panic alarm .......................................... 86 Activating ....................................... 86
Deactivating ................................... 86
Driving safety systems ... ...................... 87
ABS ................................................ 87
BAS ................................................ 89
4-ETS .............................................. 90
EBB................................................. 91
ESP®.............................................. 91
Anti-theft systems....................... ......... 95
Immobilizer..................................... 95
Anti-theft alarm .............................. 95
Tow-away alarm ............................. 97Controls in detail ............................... 99
Locking and unlocking ....................... 100 SmartKey ..................................... 100
Checking batteries in the
SmartKey ..................................... 103
Loss of the SmartKey ................... 103
Opening the doors from the
inside ........................................... 104
Tailgate ........................................ 105
Automatic central locking ............ 106
Locking and unlocking from the
inside ........................................... 107
Seats ................................................. 108 Removing and installing front
seat head restraints ..................... 108
Multicontour seat* ....................... 109
Rear seats .................................... 110
Seat heating ................................. 112
Memory function ............................... 114 Storing positions into memory ..... 115
Recalling positions from memory . 115
Storing exterior rear view mirror
parking position (Canada only) ..... 116 Lighting ............................................. 117
Exterior lamp switch .................... 117
Combination switch ..................... 122
Corner-illuminating front fog
lamps ........................................... 122
Hazard warning flasher ................ 124
Interior lighting in the front .......... 125
Rear interior lamps ...................... 126
Cargo compartment lamps .......... 127
Door entry lamps ......................... 129
Instrument cluster ............................. 130 Adjusting instrument cluster
illumination .................................. 130
Coolant temperature gauge ......... 131
Resetting trip odometer ............... 131
Tachometer.................................. 132
Outside temperature indicator ..... 132
Control system ............ ...................... 133
Multifunction display.................... 133
Multifunction steering wheel........ 134
Menus .......................................... 136
Standard display menu ................ 140
Audio menu.................................. 141
NAV menu .................................... 144
Vehicle status message memory
menu............................................ 144
W463.boo Seite 4 Montag, 19. November 2007 8:41 08

41
Getting started
Adjusting
 Adjusting
Seats
Warning!G
All seat, head restraint, steering wheel, and
rear view mirror adjustments, as well as fas-
tening of seat belts, must be done before
the vehicle is put into motion.
Warning!G
Do not adjust the driver’s seat while driving.
Adjusting the seat while driving could cause
the driver to lose control of the vehicle.
Never ride in a moving vehicle with the seat
back in an excessively reclined position as
this can be dangerous. You could slide
under the seat belt in a collision. If you slide
under it, the seat belt would apply force at
the abdomen or neck. That could cause
serious or fatal injuries.
The seat backrest and seat belts provide the
best restraint when the wearer is in a nearly
upright position and seat belts are properly
positioned on the body. Your seat must be
adjusted so that you can correctly fasten
your seat belt (
page 48).
Observe the following points:

Adjust the backrest until your arms are
slightly angled when holding the
steering wheel.

Adjust the seat to a comfortable seating
position that still a llows you to reach the
accelerator/brake pedal safely. The po-
sition should be as far back as possible
with the driver still able to operate the
controls properly.

Adjust the head restraint so that it is as
close to the head as possible and the
center of the head restraint supports
the back of the head at eye level.

Never place hands under the seat or
near any moving parts while a seat is
being adjusted.
Failure to do so could result in an accident
and/or serious personal injury.
Warning!G
When leaving the vehicle, always remove the
SmartKey from the starter switch, take it
with you, and lock the vehicle.
Even with the SmartKey removed from the
starter switch, the power seats can be
operated when the respective door is open.
Therefore, do not leave children unattended
in the vehicle, or with access to an unlocked
vehicle. A child’s unsupervised access to a
vehicle could result in an accident and/or
serious personal injury.
W463.boo Seite 41 Montag, 19. November 2007 8:41 08

114 Controls in detail
Memory function
Prior to operating the vehicle, the driver
should check and adjust the seat height,
seat position fore and aft, and seat back-
rest angle if necessary, to ensure adequate
control, reach and comfort. The head
restraint should also be adjusted for
proper height. See also the section on
air bags (
page 70) for proper seat
positioning.
In addition, adjust the steering wheel to
ensure adequate control, reach, operation
and comfort. Both the interior and exterior
rear view mirrors should be adjusted for
adequate rear vision.
Fasten seat belts. Infants and small
children should be se ated in a properly
secured restraint system that complies
with U.S. Federal Motor Vehicle Safety
Standards 213 and 225 and Canadian
Motor Vehicle Safety Standards 213 and
210.2. With the memory function you can store up
to three different configurations.
Each stored position on the driver’s side
includes the following settings:

Seat position

Multicontour seat*: previously saved
setting

Steering wheel position

Exterior rear view mirrors’ position
Each stored position on the passenger side
includes the following settings:

Seat position

Multicontour seat*: previously saved
setting
Warning!G
Do not activate the memory function while
driving. Activating the memory function
while driving could cause the driver to lose
control of the vehicle.
W463.boo Seite 114 Montag, 19
. November 2007 8:41 08

115
Controls in detail
Memory function
The memory button and memory position
button are located on each front door.
1
Memory button
1, 2, 3 Memory position button
Switch on the ignition (page 39).
or
Open the respective door.
Storing positions into memory
Adjust the seats (page 42).
On the driver’s side, additionally adjust
the steering wheel (
page 44) and
exterior rear view mirrors (
page 46)
to the desired positions.
Press memory button 1.
Release memory button 1 and press
memory position button 1, 2 , or 3 with-
in 3 seconds.
All settings are stored to the selected
position.
Recalling positions from memory
Press and hold memory position
button 1, 2 , or 3 until the seat, steering
wheel and exterior rear view mirrors
have fully moved to the stored posi-
tions.
!Do not operate the power seats using
memory button 1 if the seat backrest is in an
excessively reclined position. Doing so could
cause damage to front or rear seats.
Move seat backrest to an upright position first.
iReleasing the memory position button stops
movement to the stored positions immediately.
W463.boo Seite 115 Montag, 19 . November 2007 8:41 08

116 Controls in detail
Memory function
Storing exterior rear view mirror
parking position (Canada only)
For easier parking, you can adjust the
passenger-side exterior rear view mirror so
that you can see the rear wheel and the
road curb as soon as you engage reverse
gearR.
For information on activating the parking
position, see “Activating exterior rear view
mirror parking position (Canada only)”
(
page 178).
The memory button is located on the
driver’s door. The adjustment button and
exterior rear view mirror buttons are
located on the dashboard to the left of the
steering wheel. 1
Adjustment button
2 Driver’s side exterior rear view mirror
button
3 Passenger-side exterior rear view
mirror button
4 Memory button
Switch on the ignition (page 39).
Press button 3.
The passenger-side exterior rear view
mirror is selected.
Adjust the exterior rear view mirror
with adjustment button 1 so that you
see the rear wheel and the road curb.
Press memory button 4.
Within 3 seconds, press bottom of
adjustment button 1.
The parking position is stored if the
mirror does not move.
iIf the mirror does move, repeat the above
steps. After the setting is stored, you can move
the mirror again.
W463.boo Seite 116 Montag, 19 . November 2007 8:41 08

120 Controls in detail
Lighting
When the engine is running, and you

turn the exterior lamp switch to
positionC, the low beam head-
lamps, the tail and parking lamps, the
license plate lamps and the side mark-
er lamps switch on.

turn the exterior lamp switch to
position B, the manual headlamp
mode has priority over the daytime
running lamp mode.
The corresponding exterior lamps
switch on (
page 117). USA only:
When the engine is running, and you turn
the exterior lamp switch to position
C
or B , the manual headlamp mode has
priority over the daytime running lamp
mode.
The corresponding exterior lamps switch
on (
page 117). Locator lighting and night security
illumination
The locator lighting and the night security
illumination are described in the “Control
system” section, see “Setting locator light-
ing” (
page 152) and “Setting night secu-
rity illumination” (
page 153).
Locator lighting lamps in exterior rear
view mirrors
If the vehicle is centrally unlocked in the
darkness, the locator lighting lamps in the
exterior rear view mirrors come on.
If a door is opened, the lamp on the
corresponding side goes out. If no doors
are opened, the lamps will go out:

after a maximum of 40 seconds

immediately, when you switch on the
ignition
iWith the exterior lamp switch in
position M, you cannot switch on the high
beam headlamps.
The high beam flasher is available at all times.
For nighttime driving turn the exterior lamp
switch to position B orU to permit
activation of the high beam headlamps.
W463.boo Seite 120 Montag, 19 . November 2007 8:41 08

177
Controls in detail
Good visibility
 Good visibility
For information on windshield wipers, see
“Windshield wipers” (
page 58).
Headlamp cleaning system
The button is located on the dashboard to
the left of the steering wheel.
1 Headlamp cleaning button
Switch on the ignition (page 39).
Press button 1.
The headlamps are cleaned with a
high-pressure water jet. For information on filling up the washer
reservoir, see “Windshield/rear window
washer system and headlamp cleaning
system” (
page 275).
Rear view mirrors
For more information on setting the rear
view mirrors, see “Mirrors” (
page 46).
Auto-dimming rear view mirrors
The reflection brightness of the exterior
rear view mirrors and the interior rear view
mirror will respond automatically to glare
when

the ignition is switched on
and

incoming light from headlamps falls on
the sensor in the interior rear view
mirror
The exterior rear view mirrors and the
interior rear view mirror will not react if

reverse gear R is engaged

the interior lighting is turned on
iThe headlamps will automatically be
cleaned when you have

switched on the headlamps
and

operated the windshield wipers with
windshield washer fluid fifteen times
When you switch off the ignition, the counter
resets.
Warning!G
The auto-dimming functi on does not react if
incoming light is not aimed directly at
sensors in the interior rear view mirror.
The interior rear view mirror and the exterior
rear view mirrors do not react, for example,
when transporting ca rgo which covers the
rear window.
Light hitting the mirror(s) at certain angles
(incident light) could blind you. As a result,
you may not be able to observe traffic
conditions and could cause an accident.
W463.boo Seite 177 Montag, 19 . November 2007 8:41 08

178 Controls in detail
Good visibility
Activating exterior rear view mirror
parking position (Canada only)
Follow these steps to activate the mirror
parking position so that the passen-
ger-side exterior rear view mirror will be
turned downward to the stored position.The exterior rear view mirror buttons are
located above the exterior lamp switch.
1 Driver’s side exterior rear view mirror
button
2 Passenger-side exterior rear view
mirror button
Switch on the ignition (page 39).
Make sure you have stored a parking
position for the passenger-side exterior
rear view mirror (
page 116).
Press button 2.
The passenger-side exterior rear view
mirror is selected.
Move the gear selector lever to reverse
gear R.
The passenger-side exterior rear view
mirror will be turned downward to the
stored position.
The exterior rear view mirror returns to its
previously stored driving position:

10 seconds after moving the gear
selector lever out of position R

immediately once you exceed a vehicle
speed of approximately 6 mph
(10 km/h)

immediately when you press button 1
for driver’s side exterior rear view
mirror
Warning!G
Exercise care when using the passen-
ger-side exterior rear view mirror. The mirror
surface is convex (out wardly curved surface
for a wider field of view). Objects in mirror
are closer than they appear. Check your
interior rear view mirror or glance over your
shoulder before changing lanes.
W463.boo Seite 178 Montag, 19 . November 2007 8:41 08