2008 MERCEDES-BENZ G55AMG display

175
Controls in detail
Differential locks
Switching differential locks on and off
The switches are located on the upper part
of the center console.
1 Transfer case (center) differential lock
2 Rear axle differential lock
3 Front differential lock
4 Engagement indicator lamps (yellow)
5 Function indicator lamps (red) Switching differential locks on
Transfer case differential lock
Press switch
1.
The yellow engagement indicator
lamp 4 for the transfer case
differential lock comes on.
The ESP
® warning lamp v comes
on. When the differential lock engagement
operation has been completed, the red
function indicator lamp
5 comes on.
The message
ABS not available
differential locked
appears in the
multifunction display.
The ESP
® warning lamp v and
the - indicator lamp in the
instrument cluster come on.
Once the transfer case differential lock
is switched on, you can now, if needed,

switch on rear axle differential
lock 2
or

switch on rear axle differential
lock 2 and front differential
lock 3.
iThe differential locks can only be switched
on in the sequence 1, 2, 3.
!To avoid damage to the transfer case and
differential locks:

Engage differential locks only at low speed
(walking speed, not more than 5 mph
[8 km/h]).

Do not engage differential locks if the driving
wheels are spinning due to lack of traction.

Do not engage differential locks on paved
roads.
W463.boo Seite 175 Montag, 19 . November 2007 8:41 08

176 Controls in detail
Differential locks
Rear axle differential lock
Press switch2.
The yellow engagement indicator
lamp 4 comes on first, followed by the
red function indicator lamp 5.
The rear axle differential lock is
switched on.
Front differential lock
Press switch 3.
The yellow engagement indicator
lamp 4 comes on first, followed by the
red function indicator lamp 5.
The front differential lock is switched
on. Switching differential locks off
There are two different methods to
disengage differential locks:

You can switch the differential locks off
in reverse order (
3, 2 , 1 ).

To switch off all differential locks at the
same time:
Press switch 1.
The yellow engagement indicator
lamps 4 go out first. The red
function indicator lamps 5 go out
when the switching process has
been carried out in the differential.
To activate the ESP
®, BAS, and ABS
systems, drive again for 3 seconds using a
constant driving style. All messages in the multifunction display
disappear. The ESP
® warning lamp
v
and the - indicator lamp in the
instrument cluster go out.
iIf the red function indicator lamps 5 do not
go out when the differential locks are disen-
gaged, bring vehicle to a stop and then continue
driving. Changing the vehicle load can help to
disengage locks.
Warning!G
Always remember to disengage the differen-
tial locks when returning to drive on paved
roads, see “A few words about differentials
and differential locks” (
page 174).
W463.boo Seite 176 Montag, 19 . November 2007 8:41 08

203
Controls in detail
Driving systems
Rear Parking Assist system
malfunction
If no distance segments illuminate and no
acoustic warning sounds, there is a mal-
function in the Rear Parking Assist system.
Have the Rear Parking Assist system
checked at an authorized
Mercedes-Benz Light Truck Center as
soon as possible.
Rear view camera
Warning!G
The rear view camera is only an aid and may
display obstacles from a distorted perspec-
tive or inaccurately, or may not display ob-
stacles at all. The rear view camera does not
relieve you of the responsibility to be cau-
tious, take care and pay careful attention.
The rear view camera may not show objects
which are

very close to the rear bumper

under the rear bumper

under the spare wheel

nearby behind the spare wheel
You are responsible for safety at all times
and must continue to pay attention to the
immediate surroundings when parking and
maneuvering. This includes the area behind,
in front of and beside the vehicle. Otherwise
you could endanger yourself or others.
Warning!G
Make sure that no persons or animals are in
or near the area in which you are
parking/maneuvering. Otherwise, they
could be injured.
Warning!G
The rear view camera either will not function
or will not function to its full capability if

the tailgate is open

it is raining very hard, snowing or foggy

it is night or you are parking/maneuver-
ing your vehicle in an area where it is
very dark

the camera is exposed to a very bright
white light

the immediate surroundings are illumi-
nated with fluorescent light (the display
may flicker)

W463.boo Seite 203 Montag, 19 . November 2007 8:41 08

204 Controls in detail
Driving systems
The rear view camera is an optical parking
aid. It shows you the area behind the
vehicle in the COMAND system display
when reverse gearR is engaged, for
example during parallel parking.
To function properly, the camera lens must
be free of dirt, ice, snow, and slush. Clean
the camera lens regularly, being careful
not to scratch or damage the camera lens,
see “Cleaning the rear view camera lens”
(
page 319). The rear view camera is on the tailgate
above the rear window wiper.
1 Rear view camera
Switching the rear view camera on
Switch on the ignition (page 39).
Switch on the COMAND system.
Refer to separate COMAND system
operating instructions.

there is a sudden change in tempera-
ture, e.g. if you drive into a heated
garage from the cold (lens condensa-
tion)

the camera lens is dirty or covered

the rear of your vehicle is damaged
In this case, have the position and
setting of the camera checked by a
qualified specialist workshop.
Mercedes-Benz recommends that you
contact a Mercedes-Benz Light Truck
Center for this purpose.
Do not use the rear view camera in these sit-
uations. Otherwise you could injure yourself
or others and/or damage property including
your vehicle while parking/maneuvering.

W463.boo Seite 204 Montag, 19 . November 2007 8:41 08

205
Controls in detail
Driving systems
Move the gear selector lever to reverse
gear
R (
page 162).
The area behind the vehicle appears in
the COMAND system display.
Switching the rear view camera off
Move the gear selector lever to
position P,N or D.
or
Select another function on the
COMAND system.
iThe area behind the vehicle is shown in the
COMAND system display as a mirror image, like
in the rear view mirror.
iThe image from the rear view camera will
no longer be displayed if you select another
function on the COMAND system while reverse
gear R is engaged. To display the image again,
disengage and reengage reverse gear R.
W463.boo Seite 205 Montag, 19 . November 2007 8:41 08

227
Controls in detail
Useful features
Please note that these functions are only
available with Mercedes-Benz approved
mobile phones. Please contact an
authorized Mercedes-Benz Light Truck
Center for information on features avail-
able for your mobile phone of choice.
The cradle is located in the armrest.
Open the telephone tray (page 216).
Inserting mobile phone in mobile phone
cradle
Once the mobile phone has been inserted
in the mobile phone cradle, you have to
use the hands-free device to respond
during phone calls.
If applicable, remove the cover for the
external antenna connection from the
back of the mobile phone and store it in
a s a f e p l a c e . B e s u r e t o c o m p l y w i t h t h e
mobile phone’s operating instructions
as well.
Example illustration
1 Inserting the mobile phone
2 Connector contact
3 Mobile phone cradle
Slide the lower end of the mobile phone
into connector contact 2 on
cradle 3.
Push the top of the mobile phone in
direction of arrow 1, until the lug on
the mobile phone release button
engages.
The mobile phone is connected to the
network via the external antenna.
The mobile phone is linked to the
hands-free device and the multi-
function steering wheel.
The battery is charged depending on its
charge status and the position of the
SmartKey in the starter switch. The
charge procedure will be indicated in
the mobile phone’s display.
You can place or receive phone calls. You
can control other functions of the mobile
phone via the control system
(
page 159), the Voice Control System*
(see separate operating instructions), or
the COMAND system (see separate oper-
ating instructions).
!Do not try to remove the mobile phone along
with the cradle. You could otherwise damage the
mobile phone cradle.

W463.boo Seite 227 Montag, 19 . November 2007 8:41 08

230 Controls in detail
Useful features
System self-check
Initially, after switching on the ignition,
malfunctions are detected and indicated
(the indicator lamps in the SOS button, the
Roadside Assistance button• and the
Information button ¡ stay on longer
than 10 seconds or do not come on). The
message
Tele Aid inoperative appears
in the multifunction display. Emergency calls
An emergency call is initiated auto-
matically following an accident in which
the emergency tensioning devices (ETDs)
or air bags deploy.
An emergency call can also be initiated
manually by opening the cover next to the
interior rear view mirror labeled SOS, then
briefly pressing the button located under
the cover. See (
page 231) for
instructions on initiating an emergency call
manually.
Once the emergency call is in progress, the
indicator lamp on the SOS button will
begin to flash. The message
Connecting
call
appears in the multifunction display.
When the connection is established, the
message
Call connected appears in the
multifunction display. All information
relevant to the emergency, such as the
location of the vehicle (determined by the
GPS satellite location system), vehicle
model, identification number and color are
generated.
iWhen a Tele Aid call has been initiated,
the COMAND system audio is muted and the
selected mode (radio, CD etc.) pauses.
The optional cellular phone (if installed) inserted
in cradle switches off. If you must use this
phone, we recommend that you use it only with
the vehicle at a standstill in a safe location.
Remove the phone from the cradle and place the
call. The navigation system (if engaged) will con-
tinue to run. The display in the instrument cluster
is available for use, and spoken commands are
only available by pressing the RPT button on the
COMAND system. A pop-up window will appear
in the COMAND system display to indicate that a
Tele Aid call is in progress. After the Tele Aid call
has ended, the optional cellular phone inserted
in the cradle switches on again. A PIN entry
might be necessary.
Warning!G
If the indicator lamps on the SOS button, on
the Roadside Assistance button, and/or on
the Information button remain illuminated
continuously in red and/or the message
Tele Aid inoperative is displayed in the
multifunction display after the system
self-check, a malfunctio n in the system has
been detected.
If a malfunction is indicated as outlined
above, the system may not operate as
expected. Have the system checked at the
nearest Mercedes-Benz Light Truck Center
as soon as possible.
W463.boo Seite 230 Montag, 19 . November 2007 8:41 08

231
Controls in detail
Useful features
A voice connection between the Response
Center and the occupants of the vehicle
will be established automatically soon
after the emergency call has been
initiated. The Response Center will
attempt to determine more precisely the
nature of the accident
provided they can
speak to an occupant of the vehicle.
The Tele Aid system is available if

it has been activated and is
operational. Activation requires a
subscription for monitoring services,
connection and cellular air time

vehicle battery power is available

the relevant cellular phone network
and GPS signals are available and pass
the information on to the Response
Center Initiating an emergency call manually
1 Cover
2 SOS button
Briefly press on cover 1.
The cover opens.
Press SOS button 2 briefly.
The indicator lamp in SOS button 2
will flash until the emergency call is
concluded.iLocation of the vehicle on a map is only
possible if the vehicle is able to receive signals
from the GPS satellite network and pass the
information on to the Response Center.
Warning!G
If the indicator lamp in the SOS button is
flashing continuously and there was no
voice connection to the Response Center
established, then the Tele Aid system could
not initiate an emergency call (e.g. the rele-
vant cellular phone network is not available).
The message
Call failed appears in the
multifunction display for approximately
10 seconds.
Should this occur, assistance must be
summoned by other means.

W463.boo Seite 231 Montag, 19 . November 2007 8:41 08