Troubleshooting
210 Troubleshooting
Points to remember
G
Risk of accident and injury
If maintenance work is carried out incorrectl y this can jeopardise the operating safety of your vehicle. You risk losing control of your vehicle
and thereby causing an accident. The safety systems may also no longer be able to protect you or others as they are designed to do.
Always have maintenance work carried out at a qualified specialist workshop which has the necessary specialist knowledge and tools to
carry out the work required.
Mercedes-Benz recommends that you use a Mercedes-Benz Service Centre for this purpose.
In particular, all work relevant to safety or on safety-related systems must be carried out at a qualified specialist workshop. Warning and indicator lamps in switches and buttons
Problem Possible cause/consequence Suggested solutions
One or all of the indicator lamps
in the seat heating button are
flashing. There is insufficient voltage
because too many consumers are
switched on. The seat heating has
switched itself off automatically. X
Switch off consumers that are not required, e.g. reading lamps,
interior lighting, etc.
The seat heating will automatically switch back on as soon as there
is sufficient voltage again. The indicator lamp in the
9
button on the Thermatic control
panel is on or flashes when you
press the button. The cooling sys-
tem cannot be switched on. The cooling system is losing
refrigerant. X
Visit a qualified specialist workshop. Practical advice
463_AKB; 1; 8, en-GB
wobuchh,
Version: 2.10.6 2008-07-17T15:19:41+02:00 - Seite 210Dateiname: 6515_4091_02_buchblock.pdf; preflight
