2008 MERCEDES-BENZ G-CLASS SUV ignition

Anti-theft syste
ms 53
R
the side windows are closed.
R the sliding/tilting sunroof* is closed.
R there are no objects, e.g. mascots, hang-
ing on the rear-view mirror or on the
grasp handles on the roof trim.
This will prevent false alarms.
X Lock the vehicle using the key.
The interior motion sensor is primed after
approximately 30 seconds.
Deactivating the interior motion sensor To prevent a false alarm, deactivate the inte-
rior motion sensor if you lock your vehicle and
R
people or animals remain in the vehicle
R the windows remain open
R the sliding/tilting sunroof* remains open. 1
Deactivating the interior motion sensor
2 Indicator lamp
X Remove the key from the ignition lock.
X Press button 1.
Indicator lamp 2lights up briefly.
X Lock the vehicle using the key.
The interior motion sensor remains deacti-
vated until the vehicle is unlocked and
locked again. Safety
* optional
463_AKB; 1; 8, en-GB
wobuchh
,V ersion: 2.10.6
2008-07-17T15:19:41+02:00 - Seite 53 ZDateiname: 6515_4091_02_buchblock.pdf; preflight

Opening and closing
55
X
To change the setting: press and hold down
the k andj buttons simultaneously
for approximately six seconds until battery
check lamp 1flashes twice.
The key now functions as follows:
X To unlock the driver's door and fuel
filler flap: press thekbutton once.
X To unlock centrally: press thekbut-
ton twice.
X To lock centrally: press thejbutton.
Restoring the factory settings X
Press the kandj buttons simulta-
neously for approximately six seconds until
battery check lamp 1flashes twice. Opening the doors from the inside
You can open a door from the inside at any
time, even if it has been locked. 1
Locking knob
2 Door handle
X Pull door handle 2.
If the door is locked, locking knob 1pops
up. The door is unlocked and can be
opened. Automatic locking feature
The vehicle will lock automatically once you
have pulled away.
You can switch off the automatic locking
function via the on-board computer
(Y page 108).
When you open one of the front doors from
inside, the vehicle is unlocked centrally.
i The vehicle is locked automatically when
the ignition is switched on and the wheels
begin to turn. , there is a risk of being
locked out when the vehicle is being
pushed or tested on a dynamometer.
i The doors unlock automatically in the
event of an accident if the force of the
impact exceeds a predetermined level. Controls
463_AKB; 1; 8, en-GB
wobuchh,
Version: 2.10.6 2008-07-17T15:19:41+02:00 - Seite 55 ZDateiname: 6515_4091_02_buchblock.pdf; preflight

Key positions
596
Handle
X Pull handle 6upwards and push down the
tailgate.
! Make sure that there is sufficient clear-
ance.
Closing from the outside G
Risk of injury
Make sure that nobody can become trap-
ped as you close the tailgate. Key positions
Key
Ignition lock
0
To remove the key
1 Power supply for some consumers, e.g.
the sliding/tilting sunroof*
2 Ignition (power supply for all consumers)
and drive position
3 To start the engine
i The indicator and warning lamps light up
on the instrument cluster when you switch
on the ignition. They go out when the
engine is running. This shows that the indi-
cator and warning lamps for each system
are operational. i
You can only remove the key if:
R the key is in position 0in the ignition lock
R the automatic transmission selector
lever is in P Controls
* optional
463_AKB; 1; 8, en-GB
wobuchh , Version: 2.10.6 2008-07-17T15:19:41+02:00 - Seite 59 ZDateiname: 6515_4091_02_buchblock.pdf; preflight

Seats
60 Seats
Points to remember
For information about folding the rear bench
seat forward, see the "Luggage compartment
enlargement" section (Y page 141).G
Risk of injury
The seats can still be adjusted when there
is no key in the ignition lock. For this rea-
son, children should never be left unsuper-
vised in the vehicle. They could become
trapped when adjusting a seat. G
Risk of accident
Only adjust the driver's seat when the vehi-
cle is stationary. You will otherwise be dis-
tracted from the road and traffic conditions
and you could lose control of the vehicle as
a result of the seat moving. This could
cause an accident. G
Risk of injury
Make sure that nobody can become trap-
ped when you adjust the seat.
Observe the notes concerning the airbag
system.
Secure children as recommended; see
"Children in the vehicle" section. !
When you move the seats, make sure that
there are no objects in the footwell or
behind the seats. Otherwise, you could
damage the seats and the objects.
! Make sure that the sun visor is folded up
before setting the backrest angle and head
restraint height. Otherwise, the head
restraint and sun visor could collide when
the head restraint is fully extended.
i If the front door is open, the seats can be
adjusted for up 30 minutes after the igni-
tion has been switched off.
i The rear-compartment head restraints
can be removed (Y page 62).
Please contact a Mercedes-Benz Service
Centre for more information. Adjusting the seat
The buttons are located on the door control
panel. 1
Head restraint height
2 Backrest angle
3 Seat fore-and-aft adjustment
4 Seat cushion angle
5 Seat height
X Turn the key to position 1or 2in the ignition
lock.
Seat fore-and-aft adjustment !
Make sure that the cup
holder* (Y page 138) on the centre con-
sole is folded down. Otherwise, you could
damage the seat or the cup holder*. Controls
* optional
463_AKB; 1; 8, en-GB
wobuchh,
Version: 2.10.6 2008-07-17T15:19:41+02:00 - Seite 60Dateiname: 6515_4091_02_buchblock.pdf; preflight

Seats
61
X
Slide the button forwards or back in the
direction of arrow 3.
Backrest angle X
Slide the button forwards or back in the
direction of arrow 2.
Seat height X
Slide the button up or down in the direction
of arrow 5.
Seat cushion angle Adjust the angle so that your thighs are gently
supported.
X
Slide the button up or down in the direction
of arrow 4.
Head restraint height G
Risk of injury
Make sure that the central area of the head
restraint supports the back of your head at
about eye level. You could seriously injure
your neck if your head is not correctly sup-
ported by the head restraint in the event of
an accident. Never travel without a cor-
rectly adjusted and engaged head restraint. X
Slide the button up or down in the direction
of arrow 1.
Head restraint angle X
Sit on the seat.
X Using both hands, reach backwards and
grasp the sides of the head restraint.
X Adjust the head restraint angle. Pull the
bottom of the head restraint forwards or
push it back. Head restraints
G
Risk of injury
Occupants should only travel sitting on
seats which have the head restraints instal-
led. This reduces the risk of injury to the
passengers in the rear in the event of an
accident. Fitting and removing the front head
restraints The buttons are located on the door control
panel.
1
Head restraint height
X Turn the key to position 1in the ignition
lock or open the door.
X Tilt the backrest back slightly, to make it
easier to remove and fit the headrests.
X To remove: slide button1upwards until
the head restraint is fully extended.
X Pull the head restraint up and remove it.
X To refit: slide button 1upwards for five
seconds. Controls
463_AKB; 1; 8, en-GB
wobuchh,
Version: 2.10.6 2008-07-17T15:19:41+02:00 - Seite 61 ZDateiname: 6515_4091_02_buchblock.pdf; preflight

Seats
62
X
Insert the head restraint so that the
notches on the bar are on the left when
viewed in the direction of travel.
X Push the head restraint down until you hear
it click into place.
Resetting the front seat head restraints
It is necessary to reset the front seat head
restraints after the voltage supply has been
interrupted, e. g. if the battery has been com-
pletely discharged or disconnected.
X Make sure that the cup holder* on the
centre console is folded down
(Y page 138).
X Move the seat as far forward as possible
and the head restraint in as far as possible.
Adjusting the head restraint height G
Risk of injury
Make sure that the central area of the head
restraint supports the back of your head at
about eye level. You could seriously injure
your neck if your head is not correctly sup-
ported by the head restraint in the event of
an accident. Never travel without a cor-
rectly adjusted and engaged head restraint. X
To raise: pull the head restraint up until the
desired height has been reached.
X To lower: push the head restraint down
until the desired height has been reached.
Adjusting the head restraint angle X
Pull the lower edge of the head restraint
forwards or push it back until it is in the
desired position.
Fitting and removing the rear-compart-
ment head restraints X
To remove: pull the head restraint up and
out.
X To refit: insert the head restraint so that
the arched side points in the direction of
travel.
X Push the head restraint down until you hear
it click into place. Multi-contour seat*
You can adjust the contour of the front seat
backrests individually to provide optimum
support for your back. 1
Thigh cushion
2 Lumbar region support
3 Upper back support
4 Backrest side cushions
X Make sure that the key is in position 1in
the ignition lock.
X Thigh cushion: use button1to adjust the
thigh cushion to the desired position.
X Lumbar region support: use button2to
adjust the lumbar region support to the
desired position. Controls
* optional
463_AKB; 1; 8, en-GB
wobuchh,
Version: 2.10.6 2008-07-17T15:19:41+02:00 - Seite 62Dateiname: 6515_4091_02_buchblock.pdf; preflight

Seats
64Foot anti-entrapment feature
Interrupting the easy-entry feature
To interrupt the easy-entry feature you can do
the following:
X press one of the seat setting buttons
(Y page 60).
X press the memory button (Y page 70).
X move the steering wheel adjustment lever
(Y page 66). Seat ventilation
The three blue indicator lamps in the button
indicate the ventilation level you have selec-
ted. 1
Seat ventilation
X Make sure that the key is in position 1or
2 in the ignition lock.
X To switch on: press button1repeatedly
until the required ventilation level is set.
i If you open the side windows and the slid-
ing/tilting sunroof with the key
(Y page 85), the seat ventilation of the
driver's seat automatically switches to the
highest level.
X To switch off: press button1repeatedly
until all indicator lamps go out. i
If the battery voltage is too low, the seat
ventilation may switch off. Seat heating
The red indicator lamps in the button indicate
the heating level you have selected.
i If the battery voltage is too low, the seat
heating may switch off.
X Make sure that the key is in position 1or
2 in the ignition lock.
Front-seat heating 1
Front-seat heating Controls
463_AKB; 1; 8, en-GB
wobuchh,
Version: 2.10.6 2008-07-17T15:19:41+02:00 - Seite 64Dateiname: 6515_4091_02_buchblock.pdf; preflight

Steering wheel
66
X
Make sure that support 1lies on wheel
arch 4.
X To fold up: fold up side-facing bench seat
2.
X Fold support 1in and push it into recess
3 of side-facing bench seat 2. Steering wheel
Points to remember
You can adjust the steering wheel electrically. G
Risk of injury
The electrically adjustable steering wheel
can still be adjusted when there is no key
in the ignition lock. Therefore, do not leave
children unsupervised in the vehicle as they
could become trapped as the steering
wheel is adjusted. G
Risk of accident
Only adjust the steering wheel when the
vehicle is stationary. Drive only when the
steering wheel is fixed.
When you adjust the steering wheel, make
sure that:
R the steering wheel can be reached with
your arms slightly bent
R you can move your legs freely
R you can see all the displays in the instru-
ment cluster clearly Adjusting the steering wheel
1
Steering column fore-and-aft adjustment
2 Steering column height
X Make sure that the key is in position 1or
2 in the ignition lock.
i If the front door is open, the steering
wheel can be adjusted for up to 30 minutes
after the ignition has been switched off.
X Press the lever in the direction of arrow
1 or2 until the steering wheel is in the
desired position.
You can find more information under:
R easy-entry/exit feature
R storing settings Controls
463_AKB; 1; 8, en-GB
wobuchh,
Version: 2.10.6 2008-07-17T15:19:41+02:00 - Seite 66Dateiname: 6515_4091_02_buchblock.pdf; preflight