2008 MERCEDES-BENZ E-CLASS SALOON ad blue

Service products and capacities
386 E 200
KOMPRESSOR E 230 E 280
E 280
4MATIC E 350
E 350
4MATIC
E 350 CGI E 500
E 500
4MATIC E 63 AMG
MB Sheet number 229.3/229.31
229.5/229.51 229.3/229.5 229.3/229.5 229.3/229.5 229.3/229.5
229.5
68 E 200 CDI E 220 CDI E 280 CDI
E 280 CDI
4MATIC E 320 CDI
E 320 CDI
4MATIC E 420 CDI
E 300 Bluetec MB Sheet number
With a diesel partic-
ulate filter 228.51/229.31/
229.51 228.51/229.31/
229.51 228.51/229.31/
229.51 228.51/229.31/
229.51 228.51/229.31/
229.51 MB Sheet number
Without a diesel
particle filter
69 228.3/228.5/
228.51/
229.3/229.31/ 229.5/229.51 228.3/228.5/
228.51/
229.3/229.31/ 229.5/229.51 228.3/228.5/
228.51
229.3/229.31/ 229.5/229.51 228.3/228.5/
228.51
229.3/229.31/ 229.5/229.51 —
i
In the event that the: R
engine oil brand
R grade (MB Sheet number)
R SAE classification (viscosity) corresponding to the oil used in your engine
is not available, you can use a different
mineral or synthetic engine oil approved by
Mercedes-Benz.
68 Restriction: only SAE XW-40 engine oils may be used.
69 Only for certain countries. Technical data
211_AKB; 2; 5, en-GB
mkalafa,
Version: 2.9.4 2008-02-29T16:57:07+01:00 - Seite 386Dateiname: 6515_3416_02_buchblock.pdf; preflight

Service products and capacities
387
Mixing oils reduces the benefits of high-
grade engine oil.
! Do not use lubricant additives, since they
lead to increased wear and damage to the mechanical assemblies. The use of lubri-
cant additives limits warranty claims.
!
Engine oils for vehicles without a diesel
particle filter may also be used temporarily
in vehicles with a diesel particle filter if the
engine oil listed is not available. You must
then have an oil change carried out as soon
as possible.
Capacities The following values refer to an oil change including the oil filter.
Engine with oil filter E 200
KOMPRESSOR E 230
E 280
E 280 4MATIC E 350
E 350 4MATIC E 350 CGI E 500
E 500 4MATIC E 300 Bluetec E 63 AMG
Replacement amount 5.5 l 8.0 l 8.5 l 8.8 l
Engine with oil filter E 200 CDI
E 220 CDI E 280 CDI 4MATIC
E 320 CDI 4MATIC E 280 CDI
E 320 CDI E 420 CDI
Replacement amount 6.5 l 8.5 l 8.5 l 10.5 lTechnical data
211_AKB; 2; 5, en-GB
mkalafa,
Version: 2.9.4 2008-02-29T16:57:07+01:00 - Seite 387 ZDateiname: 6515_3416_02_buchblock.pdf; preflight

Service products and capacities
390 E 200 CDI E 220 CDI E 280 CDI
E 280 CDI
4MATIC
E 300 Bluetec E 320 CDI
E 320 CDI
4MATIC E 420 CDI
Coolant 10.2 l 10.2 l 13.0 l 13.0 l 15.3 l
Amount of antifreeze/corrosion inhibitor required for antifreeze protection
Down to –37 °C
(approx. 50%) 5.1 l 5.1 l 6.5 l 6.5 l 7.7 l
Down to –45 °C
(approx. 55%) 5.6 l 5.6 l 7.2 l 7.2 l 8.4 l
Brake fluid
Over a period of time, the brake fluid absorbs
moisture from the air; this lowers its boiling
point. G
Risk of accident
If the boiling point of the brake fluid is too
low, vapour pockets may form in the brake
system when the brakes are applied hard
(e.g. when driving downhill). This would
impair braking efficiency. Have the brake fluid renewed every two
years with a brake fluid that has been
approved by Mercedes-Benz and have this
confirmed in the Service Booklet.
i There is usually a notice in the engine
compartment to remind you when the next
brake fluid change is due. Windscreen washer system
The washer fluid reservoir holds approxi-
mately 4.5 litres; on vehicles with the head-
lamp cleaning system* it holds 7 litres.
The headlamp cleaning system* and the
windscreen washer system are both supplied
from the washer fluid reservoir.
X At temperatures above freezing point:
Top up the washer fluid reservoir with a
mixture of water and windscreen washer
concentrate (Y page 226).
X At temperatures below freezing point: Technical data
* optional
211_AKB; 2; 5, en-GB
mkalafa,
Version: 2.9.4 2008-02-29T16:57:07+01:00 - Seite 390Dateiname: 6515_3416_02_buchblock.pdf; preflight