2008 MERCEDES-BENZ E-Class navigation system

30 At a glanceQuick reference COMANDSetting the volume 
Turn the rotary control
4
located on
the COMAND control unit,
or
Press
æ or ç on the multifunc
-
tion steering wheelThe volume changes up or down, de
-
pending on the direction of rotation or
which button was pressed.The system stores the volume settings
when the device is switched OFF.

After switching the system back on again,
the volume may be lower than at the time
when the system was switched OFF.
This could be the case if:
the system was switched OFF for more
than 15 minutes, and

the volume had been set to a value in a
certain range at the time the device
was switched OFF.
Automatic volume control The automatic volume control adjusts the
volume depending on
the vehicle’s speed (only in vehicles
without Sound-system*),or onthe interior ambient noises of the vehi
-
cle (only in vehicles with Sound-sys
-
tem*)

other parameters (e.g. windows open
or closed)
A common balance and fader setting ap
-
plies to the following operating modes:
Radio

Single CD

MP3

CD changer*

AUX

Satellite radio*
When adjusting the balance or the fader,
the system automatically stores the set
-
ting for the currently active operating
mode.Balance and faderiFor Navigation* a different balance/
fader setting is possible. You find the
description under “Adjusting the
acoustics for navigation announce
-
ments”
( page
109)
.

105 Navigation*
Important notes
COMAND calculates the route with the
help of data that is stored on the naviga
-
tion DVD.Only use Mercedes-Benz navigation DVDs
designed for the E-Class (211) COMAND
system. No other CDs or DVDs will work.
Using other navigation CDs or DVDs might
lead to malfunctions.Because of changes in local traffic patterns
(e.g. road works) and/or incomplete data,
errors in calculation may occur.As a result, the recommended route may
deviate from the ideal route. The data
stored on the DVD only reflects local con
-
ditions at the time of DVD production. DVD
maps do not cover all areas nor all routes
within an area.
The DVD is loaded into (and ejected from)
the navigation module.

The navigation module is mounted on the
left-hand side of the trunk.1Ejecting DVDs 2DVD slot
Loading 
Insert the DVD into the DVD slot 2
with the label facing up.The navigation computer pulls the DVD
in.
Ejecting 
Press

and wait until the navigation
computer ejects the DVD.
The navigation DVD covers the continental
U.S., Hawaii and Canada. Contact your Mercedes-Benz Center or the
Customer Assistance Center in the U.S. at
1-800-FOR-MERCedes (1-800-367-6372)
or in Canada at 1-800-387-0100 for other
DVDs that may be available.
Change the navigation DVD ( page
105)
.
Navigation DVD
Loading/ejecting the DVD iYour Navigation DVD drive has been
designed to play DVDs which corre
-
spond to the IEC
60908 standard.
If you insert thicker data carriers, e.g.
ones that have data on both sides (one
side with DVD data, the other side with
audio data), they cannot be ejected
and will damage the drive.
Travelling abroad

106 Navigation*Important notesTIf your vehicle has been transported by a
car, train or ferry, COMAND may require
some time to find its exact position.
COMAND may issue navigation announce
-
ments not suited to your actual position. Moving the vehicle a few yards is typically
enough to remedy the situation.While determining the exact position ,
route guidance is subject to the following
restrictions: 
COMAND does not output navigation
announcements.

The display
OFF
ROAD
and an arrow indi
-
cating the direction of the destination
appear instead of the detailed naviga
-
tion displays.
Once the system is correctly repositioned,
route guidance continues with navigation
announcements and detailed navigation
displays.
The following instructions have to be fol
-
lowed when interrupting a trip during route
guidance, and later continuation:
Continuation of the trip within 2
hours
after interruption:
The system automatically resumes
route guidance.

Continuation of the trip between
2 and
12 hours after interruption:

Continue route guidance manually
in the Navigation main menu ( page
108)
.
Route guidance with GPSiGPS (
Global
Positioning
System) sig
-
nals received make it possible to deter
-
mine the current vehicle position.iDeviations from the actual position
may occur 
if the reception of GPS signals is
disturbed e. g. in parking garages
and tunnels

if road conditions are bad

depending on the vehicle’s condi
-
tion
Route guidance after vehicle trans
-
port
iThe navigation DVD must be loaded in
the navigation computer
( page
105)
.
Trip interruption during route guid
-
ance iTrip interruption means parking the ve
-
hicle and switching COMAND OFF.Trip continuation means trip continua
-
tion with COMAND switched ON.

108 Navigation*Navigation main menu
Press

.
The Navigation main menu appears, if
no route guidance is active.

Use

or

to select a menu item
and press

;
or

Press one of the soft keys.The selected menu or the selected soft
key function appears.
Selectable menu items
Continue route guidance

Continues a cancelled route guidance,

Destination memory

Destinations can be selected from the Destination memory
( page
149)
,

Destination entry

Provides access to the Destination en
-
try menu
( page
114)
,

Last destinations

You can select from the list of last des
-
tinations
( page
148)
,

POIs

(Points
of Interest)

Provides access to POIs input ( page
152)
. POIs include stops at
gas stations, airports, rest areas, hospi
-
tals, etc.
Calling up the Navigation main menuiIf route guidance is active, a prompt is
displayed instead, asking if route guid
-
ance is to be cancelled
( page
132)
.
iThis menu item only appears:
if the route guidance had previously
been interrupted
( page
132)
, and
less than 30 minutes have expired
since the interruption,
or
if the trip was interrupted and is to
be continued 2 - 12 hours after in
-
terruption
( page
106)
.
iDestination memory
and
Last
destinations
can only selected only if
destinations are already stored in the
system.

109 Navigation*
Navigation main menu
Selectable soft keys
Home
soft key

Provides access to the input of a home
address
( page
113)
.

Mode
soft key

Provides access to the route mode set
-
ting for certain road types to be avoid
-
ed
( page
109)
.

Setting
soft key

Provides access to settings adjusting
the acoustics of navigation announce
-
ments (treble, bass, volume, balance
and fader)

( page
109)
.
Certain road types to be avoided can be
defined for the system’s route calculation.
Press the
Mode
soft key in the Naviga
-
tion main menu
( page
108)
.
The Setting Mode menu for road types
to be avoided appears.

Use

or

to select an option.

Press

.
This will switch the option ON or OFF.

Upon completion, press the
Back
soft
key.
The following acoustics criteria for naviga
-
tion announcements can be adjusted:
Bass / Treble
( page
110)
.

Balance / Fader
( page
110)
.

Volume
( page
110)
.

Press the
Setting
soft key in the Navi
-
gation main menu
( page
108)
.
The Setting menu appears.
Avoiding certain road types
iEmpty square
= option OFF

Solid square
= option ON
Several options can be activated.
Adjusting the acoustics for

navigation announcements

112 Navigation*Destination entryEntering charactersFor character entry, the 12 button keypad
or the keypad menu can be used.
Entering a character via keypad menu
Use

, 
, , , (
or
+
to
select a character

Press

.
The character is entered.
Entering a character via 12 button key
-
pad
Use the
3
- "
keys to enter a char
-
acter.A key must be pressed once or several
times in quick succession.
After pressing the first time, the char
-
acter display 1 appears.
1Character display
You can see which characters can be
entered when using the keys.

Each additional depression moves you
to the next available character. The
character selected appears black.

Wait until the character display disap
-
pears, or press

.
The character is entered.
Entering dataiFor more convenient entry, COMAND
offers only available characters from
the character set based on your selec
-
tions and the data stored on the navi
-
gation DVD.

The character selected appears magni
-
fied or black.

The system will complete the entry if
the input matches data stored on the
navigation DVD.

113 Navigation*
Destination entry
Deleting a character
Press the
Delete
soft key, if necessary.
The character last accepted by the sys
-
tem is deleted.
Confirming the data entryAfter entering all the characters data entry
must be confirmed.
Press and hold

for approx. 2 sec
-
onds to confirm the entry;
or
Use

or

to select the
sym
-
bol and press

.
One frequently used destination address
can be established as the Home address.
Call up the Navigation main menu ( page
108)
.

Press the
Home
soft key.
A message
No home
address
stored
ap
-
pears or if a home address has already
been established, the home address
appears.

To start route guidance to the estab
-
lished home address press

.
or
To enter or change the home address,
press the
Change
soft key.
The Navigation main menu with menu
items to change the home address ap
-
pears.
iDo not confuse the
Delete
soft key (de
-
letion of the last character) with the Back
soft key (deletion of the complete
entry).
iThe
symbol can only be selected if
the system has recognized data entry.
ok
ok
Entering a home address


119 Navigation*
Destination entry

Press

.
The Start Route Guidance menu ( page
128)
appears.
The system accesses one of the following
menus after entering of a destination city ( page
116)
:

For larger cities with more than 15
streets:

Enter Street menu.

For smaller cities with up to 15
streets:

Select Street menu
( page
119)
.

If no streets are registered for the se
-
lected city, or if a street extends
through several city centers:

Select City Center menu
( page
118)
.
The appropriate menu can be identified
from the display in the status bar.
Entering a street 
Use the keypad menu or the 12 buttton
keypad to enter the data of the street ( page
112)
.
After entering the street a selection list
of streets appears. Now continue with
selecting a street.
Switching to a selection list is possible at
any time while entering a street.
Press the
List
soft key.
The selection list appears. Now contin
-
ue with selecting a street.
Selecting a street
Use

or

to select a street. The
Page
soft keys allow scrolling through
the list page by page.

Press

.
The Start Route Guidance menu with
the selected destination information
appears;or If the street extends through several
city centers, the list of city centers re
-
ferring to the street selected appears.
Entering a street in the destination
city