137 Navigation*
During route guidance
1Estimated time of arrival2Remaining driving time in hours and
minutes3Remaining journey (distance)
Points 1, 2 and 3 refer to the stop
-
over destination. You'll only see the de
-
tails for the final destination when you
arrive at your stopover and the system
has calculated the route to the main
destination.
Selectable soft keys:
Route
soft key
Provides access to the display of the
route on the map
( page
137)
.
Mode
soft key
Provides access to the route mode set
-
ting for certain road types to be avoid
-
ed
( page
109)
.
In the Info menu
( page
136)
, press
the
Route
soft key.
The map appears. The route remaining
is highlighted in blue color. The destination is marked with a flag , any stop-over destination is marked with a flag
. The current vehicle posi
-
tion is identified with the
symbol.
Depending on the distance to the des
-
tination, it may take some time before
the route display appears.
iThe estimated time of arrival does not
refer to the time zone of destination,
but always refers to the time zone of
the vehicle's current location. For a
correct calculation, make sure that the
system clock is set correctly ( page
164)
.
Displaying the route on the map
s
165 System
System settings
Setting the time The UTC time transmitted by the GPS sat
-
ellites has to be set to the local time zone.
This enhances
correct navigation for routes with time-
dependent traffic guidance, and
correct calculation of the estimated
time of arrival.
Use
or
to select the hours or
the minutes.
Press
or
.
Depending on the selection, hours or
minutes are set.Setting the minutes:
With GPS reception, each time you
press
or
changes the time in in
-
crements of 30 minutes. Without GPS
reception, the time is changed in 1
minute increments.Setting the hours:
Each time you press
or
, the
hours change in increments of 1 hour.
Press the
Back
soft key.
The new setting is stored.
Setting the date
Use
or
to select the day, the
month or the year.
Press
or
.
Depending on the selection, the day,
the month, or the year is set.
Press the
Back
soft key.
The new setting is stored.
Setting the date/Time format
Press the
Format
soft key.
You will see the date and time following
the currently selected format, as well
as a list of possible formats.
iThere is no automatic change from day
-
light saving time to standard time.
This has to be changed manually.When you change the time zone, the
clock time also changes automatically.
If you enter an incorrect time, the time
difference remains unchanged when
you change time zone.
iThe date can be set only if GPS recep
-
tion is available.
