2008 MERCEDES-BENZ CLS63AMG light

[x] Cancel search: light

Page 340 of 481

MERCEDES-BENZ CLS63AMG 2008 W219 Owners Manual 339 Operation
Vehicle care
Light alloy wheels
If possible, clean wheels once a week.
Use Mercedes-Benz approved Wheel 
Care, a soft bristle brush and a strong 
spray of water for cleaning the light a

Page 341 of 481

MERCEDES-BENZ CLS63AMG 2008 W219 Owners Manual 340 Operation
Vehicle care
Hard plastic trim items
Use Mercedes-Benz approved Interior 
Care, a soft, lint-free cloth and apply 
with light pressure.
Steering wheel and gear selector lever
Wipe with

Page 342 of 481

MERCEDES-BENZ CLS63AMG 2008 W219 Owners Manual 341 Operation
Vehicle care
Leather upholstery
Please note that leather upholstery is a 
natural product and is therefore subject to 
a natural aging process. Leather uphol-
stery may also react to cer

Page 358 of 481

MERCEDES-BENZ CLS63AMG 2008 W219 Owners Manual 357 Practical hints
What to do if …
ProblemPossible cause/consequenceSuggested solution
75
The indicator lamp does not illuminate 
and/or does not remain illuminated 
with the weight of a typical 
1

Page 386 of 481

MERCEDES-BENZ CLS63AMG 2008 W219 Owners Manual 385 Practical hints
What to do if …
Display symbolDisplay messagePossible cause/consequencePossible solution
.License Plate Lamp
LeftThe left license plate lamp is malfunction-
ing.Replace the bulb

Page 387 of 481

MERCEDES-BENZ CLS63AMG 2008 W219 Owners Manual 386 Practical hints
What to do if …
Display symbolDisplay messagePossible cause/consequencePossible solution
.Rear Left FoglampThe left rear fog lamp is malfunctioning. Contact an authorized 
Merce

Page 405 of 481

MERCEDES-BENZ CLS63AMG 2008 W219 Owners Manual 404 Practical hints
Replacing bulbs
Bulbs
Safe vehicle operation depends on proper 
exterior lighting and signaling. It is there-
fore essential that all bulbs and lamp as-
semblies are in good workin

Page 407 of 481

MERCEDES-BENZ CLS63AMG 2008 W219 Owners Manual 406 Practical hints
Replacing bulbs
Rear lamps Notes on bulb replacement
Use only 12 volt bulbs of the same type 
and with the specified watt rating. 
Switch lights off before changing a bulb 
to pr