2008 MERCEDES-BENZ CLS63AMG display

[x] Cancel search: display

Page 155 of 481

MERCEDES-BENZ CLS63AMG 2008 W219 Owners Manual 154 Controls in detail
Control system
The table below shows what settings can 
be changed within the various menus. Detailed instructions on making individual 
settings can be found on the following p

Page 156 of 481

MERCEDES-BENZ CLS63AMG 2008 W219 Owners Manual 155 Controls in detail
Control system
Instrument cluster submenu
Access the
 Instr. Cluster submenu via 
the 
Settings menu. Use the Instr. Clus-
ter 
submenu to change the instrument 
cluster display

Page 157 of 481

MERCEDES-BENZ CLS63AMG 2008 W219 Owners Manual 156 Controls in detail
Control system
Press buttonæ orç to select 
the language to be used for the multi-
function display messages.
Available languages:
German
English
French
Italian
Spanish

Page 158 of 481

MERCEDES-BENZ CLS63AMG 2008 W219 Owners Manual 157 Controls in detail
Control system
Time/Date submenu
Access the
 Time/Date submenu via the 
Settings menu. Use the Time/Date sub-
menu to change the time and date display 
settings. The following f

Page 159 of 481

MERCEDES-BENZ CLS63AMG 2008 W219 Owners Manual 158 Controls in detail
Control system
Setting time (minutes)
This function can only be seen when time 
synchronization is switched off.
Move the selection marker with the 
æ orçbutton to the
 Time/

Page 160 of 481

MERCEDES-BENZ CLS63AMG 2008 W219 Owners Manual 159 Controls in detail
Control system
Setting date (year)
Move the selection marker with the 
æ or çbutton to the
 Time/Date 
submenu.
Press buttonj ork repeatedly 
until the message
 Set Date Yea

Page 161 of 481

MERCEDES-BENZ CLS63AMG 2008 W219 Owners Manual 160 Controls in detail
Control system
With daytime running lamp mode activated 
and the exterior lamp switch in 
positionM orU, the low beam 
headlamps are switched on when the 
engine is running.
In

Page 162 of 481

MERCEDES-BENZ CLS63AMG 2008 W219 Owners Manual 161 Controls in detail
Control system
Setting ambient lighting
Use this function to adjust the brightness 
of the ambient lighting.
Move the selection marker with 
buttonæ orç to the
 Lighting 
sub