139 Controls in detail
Control system
Control system
The control system is activated as soon as
the SmartKey in the starter switch is
turned to position1 or as soon as the
KEYLESS-GO start/stop button* is in
position1. The control system enables you
to:
call up information about your vehicle
change vehicle settings
For example, you can use the control sys-
tem to find out when your vehicle is next
due for service, to set the language for
messages in the multifunction display, and
much more.
The control system relays information to
the multifunction display.
Multifunction display
1Outside temperature
2Trip odometer
3Automatic transmission program mode
4Main odometer
5Current gear selector lever position
Above illustration shows the standard
display.
For more information on menus displayed
in the multifunction display, see “Menus”
(
page 142).
iThe displays for the audio systems (radio,
CD player) will appear in English, regardless of
the language selected.
Warning!G
A driver’s attention to the road and traffic
conditions must always be his/her primary
focus when driving.
For your safety and the safety of others,
selecting features through the multifunction
steering wheel should only be done by the
driver when traffic and road conditions per-
mit it to be done safely.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is
covering a distance of 44 feet (approximate-
ly 14 m) every second.
154 Controls in detail
Control system
The table below shows what settings can
be changed within the various menus. Detailed instructions on making individual
settings can be found on the following pag-
es.
Instrument clusterTime/DateLightingVehicleConvenience
(page 155)(page 157)(page 159)(page 162)(page 163)
Selecting speedometer
display modeSynchronizing the timeSetting daytime running
lamp mode (USA only)Setting automatic
lockingActivating
easy-entry/exit feature
Selecting languageSetting time (hours)Setting locator lightingAudio search function
Selecting display (speed
display or outside tem-
perature) for status lineSetting time (minutes)Setting ambient lighting
Selecting display (speed
display or outside tem-
perature) for basic dis-
playSetting date (month)Setting night security illu-
mination
Setting date (day)Setting interior lighting
delayed shut-off
Setting date (year)
155 Controls in detail
Control system
Instrument cluster submenu
Access the
Instr. Cluster submenu via
the
Settings menu. Use the Instr. Clus-
ter
submenu to change the instrument
cluster display settings. The following
functions are available:Selecting speedometer display mode
Move the selection marker with the
æ or çbutton to the
Instr.
Cluster
submenu.
Press buttonj ork repeatedly
until the message
Display Unit
Speed-/Odometer
appears in the multi-
function display.
The selection marker is on the current
setting.
Press button æ or ç to set
speedometer unit to
Km or Miles.Selecting language
Move the selection marker with the
æ or çbutton to the
Instr.
Cluster
submenu.
Press buttonj ork repeatedly
until the message
Language appears in
the multifunction display.
The selection marker is on the current
setting.
FunctionPage
Selecting speedometer display
mode155
Selecting language155
Selecting display (speed display
or outside temperature) for sta-
tus display156
Selecting display (speed display
or outside temperature) for basic
display156
