2008 MERCEDES-BENZ CL-Class wiper blades

ContentsAt the gas station............................... 550
Refueling ...................................... 550
Check regularly and before a
long trip ........................................ 552
Engine compartment.......................... 553
Hood ............................................ 553
Engine oil...................................... 554
Transmission fluid level ................ 558
Active Body Control (ABC)
fluid level ...................................... 558
Coolant level ................................ 559
Windshield washer system and
headlamp cleaning system ........... 560
Tires and wheels ................................ 561
Important guidelines .................... 561
Tire care and maintenance ........... 562
Direction of rotation ..................... 564
Loading the vehicle ...................... 564
Recommended tire
inflation pressure ......................... 569
Checking tire inflation pressure ... 571
Tire labeling .................................. 577
Load identification........................ 581
DOT, Tire Identification Number
(TIN) ............................................. 581Maximum tire load ....................... 582
Maximum tire inflation pressure .. 583
Uniform Tire Quality Grading
Standards (U.S. vehicles) ............. 583
Tire ply material ........................... 585
Tire and loading terminology ........ 585
Rotating tires ............................... 589
Winter driving .................................... 590
Winter tires .................................. 590
Snow chains ................................. 591
Maintenance ...................................... 592
Maintenance service indicator
message....................................... 592
Calling up the maintenance
service indicator display............... 593
Resetting the maintenance
service indicator........................... 594
Vehicle care ....................................... 595
Cleaning and care of vehicle ........ 595
Practical hints................................. 607
What to do if …? ................................ 608
Lamps in instrument cluster ........ 608
Air bag off indicator lamp............. 620
Vehicle status messages in the
multifunction display.................... 622
Where will I find ...? ........................... 681
First aid kit ................................... 681
Vehicle jack, vehicle tool kit,
luggage bowl, Minispare wheel .... 681
Unlocking/locking in an emergency .. 684
Unlocking the vehicle................... 684
Locking the vehicle ...................... 685
Replacing SmartKey batteries ........... 686
Replacing bulbs ................................. 688
Bulbs ............................................ 689
Replacing bulbs for front lamps ... 691
Replacing bulbs for the
rear lamps .................................... 693
Replacing wiper blades ...................... 694
Placing wiper arms in
vertical position ........................... 694
Removing wiper blades ................ 695
Installing wiper blades ................. 695

27 At a glance
Exterior view
Item
Page
1
Trunk

Unlocking


Opening and closing


Minispare wheel


Vehicle tool kit
500
500
696
681
2
Rear lamps
689
3
Rear window, defrosting
496
4
Fuel filler flap
Gasoline
550
737
5
Doors

Locking and unlocking


Opening and closing
352
362
Item
Page
6
Exterior rear view mirror
Parking position
381
384
7
Towing the vehicle
710
8
Rims and tires

Checking tire inflation
pressure


Minispare wheel


Flat tire
727
571
683
696
9
Hood, opening
Engine oil
Coolant
553
554
559
Item
Page
a
Headlamp cleaning system
395
b
Front lamps
689
c
Windshield wipers
Wiper blades, replacing
Wiper blades, cleaning
400
694
603
d
Window, cleaning
603
e
Power tilt/sliding sunroof
506

400 Controls in detailWindshield wipersCombination switch1Switching on windshield wipers
2Single wipe
Wiping with windshield washer fluid

Switch on the ignition (
page 365).
Switching on/off windshield wipers
Turn the combination switch to the de-
sired position depending on the inten-
sity of the rain.
MWindshield wipers off
USlow intermittent wiping
(rain sensor operation low sen-
sitivity)
VFast intermittent wiping
(rain sensor operation high sen-
sitivity)
uSlow continuous wiping
tFast continuous wiping
!
If the windshield wipers leave smears on the
windshield after the car has been driven through
an automatic car wash, then wax or other resi-
due is on the windshield. Shortly after washing
the car in an automatic car wash, clean the wind-
shield with windshield washer fluid
(
page 401).
!
Do not operate the wipers when the wind-
shield is dry. Dust that accumulates on a wind-
shield might scratch the glass and/or damage
the wiper blades when wiping occurs on a dry
windshield. If it is necessary to operate the wip-
ers in dry weather conditions, always operate
the wipers with windshield washer fluid
(
page 401).
!
If anything blocks the windshield wipers
(leaves, snow, etc.), switch them off immediate-
ly.


For safety reasons, stop the vehicle in a safe
location,

turn off the engine by turning the
SmartKey to position0 and withdraw
SmartKey from starter switch
or


turn off the engine by pressing the
KEYLESS-GO* start/stop button
(page 366) and open the driver’s door
(with the driver’s door open, starter
switch is in position0, same as with
SmartKey removed from starter switch)
before attempting to remove any blockage.


Remove blockage.


Turn the windshield wipers on again.If the windshield wipers fail to function at all with
the combination switch in position u,


set the combination switch to the next high-
er wiper speed


have the windshield wipers checked at the
nearest authorized Mercedes-Benz Center

401 Controls in detail
Windshield wipers
Intermittent wiping
Only switch on intermittent wiping under
wet weather conditions or in the presence
of precipitation.

Turn the combination switch to posi-
tion U or V.
The wipers move across the wind-
shield. Afterward, the wiping intervals
are determined by the wetness of the
windshield.
After the initial wipe, pauses between
wipes are automatically controlled by the
rain sensor.
Single wipe
Press the combination switch briefly in
the direction of arrow2 (
page 400)
to the resistance point.
The windshield wipers wipe one time
without washer fluid.
Wiping with windshield washer fluid
Press the combination switch in the di-
rection of arrow2 (
page 400) past
the resistance point.
The windshield wiper operates with
washer fluid.
For information on filling up the washer
reservoir, see “Windshield washer system
and headlamp cleaning system”
(
page 560).
i
When the windshield wipers are switched on
and you brake the vehicle to a stop, the wipers
operate more slowly.
!
Do not leave windshield wipers on an inter-
mittent setting when the vehicle is taken to an
automatic car wash or during windshield clean-
ing. Wipers will operate in the presence of water
sprayed on the windshield, and windshield wip-
ers may be damaged as a result.
!
If you have set intermittent wiping, dirt on
the surface of the rain sensor or optical effects
may cause the windshield wipers to wipe in an
undesired fashion. This could then damage the
windshield wiper blades or scratch the windows.
You should therefore switch off the windshield
wipers when weather conditions are dry.
i
Intermittent wiping is interrupted when the
vehicle is at a standstill and a door is opened.
This protects persons getting into or out of the
vehicle from being sprayed.
Intermittent wiping will be continued when


both doors are closed and the automatic
transmission is set to positionD orR
or


the wiper setting is changed using the com-
bination switch
i
To prevent smears on the windshield or
noisy/chattering wiper blades, wipe with wind-
shield washer fluid every now and then even
when it is raining.

484 Controls in detailDriving systemsNight View Assist* malfunctionProblem
Possible cause
Suggested solution
The quality of the Night View Assist image
has diminished.
The windshield wipers are leaving streaks
on the windshield.

Replace windshield wiper blades
(page 694).
The area of the windshield within the cam-
era’s field of view is dirty.

Clean windshield (
page 602).
The area of the windshield within the cam-
era’s field of view has been damaged.

Replace windshield.
The area of the windshield within the cam-
era’s field of view is fogged over.

Remove condensation (
page 483).
The area of the windshield within the cam-
era’s field of view is iced over.

Defrost windshield (
page 494).

553 Operation
Engine compartment
Engine compartment
Hood
Opening1Release lever

Pull release lever 1.
The hood is unlocked.
2Lever for opening the hood

Push lever 2 on the hood upwards.

Pull up on the hood and then release it.
The hood will be automatically held
open at shoulder height by gas-filled
struts.
Warning!
G
Do not pull the release lever while the vehi-
cle is in motion. Otherwise the hood could
be forced open by passing air flow.
This could cause the hood to come loose
and injure you and/or others.Warning!
G
You could be injured when the hood is open
– even when the engine is turned off.
Parts of the engine can become very hot. To
prevent burns, only touch owner serviceable
components described in the Operator’s
Manual and comply with all relevant safety
precautions.
!
To avoid damage to the windshield wipers or
hood, never open the hood if the wiper arms are
folded forward away from the windshield.
Warning!
G
To help prevent personal injury, stay clear of
moving parts when the hood is open and the
engine is running.
The radiator fan may continue to run for ap-
proximately 30 seconds or even restart af-
ter the engine has been turned off. Stay
clear of fan blades.


603 Operation
Vehicle care
2Camera
Clean inside of windshield in front of
camera2 with a soft, non-scratching
cloth.

Use recessed handles1 to swing
camera cover up.Cleaning the windows and the wiper
blades

Make sure the hood is fully closed.
Placing wiper arms in vertical position
Vehicles with SmartKey:

Turn SmartKey in starter switch
position1.

Turn combination switch to wiper
settingu (
page 400).

With wiper arm in vertical position, turn
the SmartKey in starter switch to
position0.
Vehicles with KEYLESS-GO*:

Make sure the vehicle’s on-board elec-
tronics have status 1 (
page 366).

Turn combination switch to wiper
settingu (
page 400).

Press KEYLESS-GO start/stop button
repeatedly until windshield wipers
start.

Press KEYLESS-GO start/stop button
when the wiper arms are in a vertical
position.
Cleaning

Fold the wiper arms forward until they
snap into place.
!
If you use a windshield cleaning product,
make sure that none of the cleaning product
comes into contact with the lens of the Night
View Assist camera.
!
The windshield wipers must be in a vertical
position before folding them away from the wind-
shield. They could otherwise damage the hood.
Never open the hood when the wiper arms are
folded forward.
Warning!
G
For safety reasons, switch off wipers and re-
move SmartKey from starter switch (vehi-
cles with KEYLESS-GO*: Make sure the
vehicle’s on-board electronics have
status0) before cleaning the windshield
and/or the wiper blades. Otherwise, the
wiper motor could suddenly turn on and
cause injury.


607 Practical hints
What to do if …?
Where will I find ...?
Unlocking/locking in an emergency
Replacing SmartKey batteries
Replacing bulbs
Replacing wiper blades
Flat tire
Batteries
Jump starting
Towing the vehicle
Fuses