2008 MERCEDES-BENZ CL-Class bluetooth

175 Control systems
COMAND telephone*
Saving a phone book entry from the mo-
bile phone in an existing address book
entry
Search for a phone book entry in the
mobile phone (
page 166).
or

Display details of a phone book entry in
the mobile phone (
page 168).

Select “Options”
“Save”
“Add”.

Select a number category, e.g. “Home”.

Select a telephone category, e.g. “Land
Line”.

Select “Save”.
The search menu for address book en-
tries appears.

Search for desired entry.

After selecting an entry, press n.
COMAND saves the data if there are
fewer than four numbers assigned to
the selected entry in the selected num-
ber category. Otherwise, you will see a
prompt asking whether one of the ex-
isting numbers should be overwritten.

Select “Yes” or “No”.
If you select “Yes”, a selection list will
appear containing the four existing
numbers.

Select the number to be overwritten.
COMAND overwrites the selected num-
ber with the new data.Importing data from external
Bluetooth
® devices
You can import vCards from external
Bluetooth® devices into the address book.
Please keep the following in mind:


Bluetooth
® is activated in COMAND
(
page 176) and in the device con-
cerned.


The external device must be able to
send vCards by Bluetooth
®.


The external device is inside the vehi-
cle, switched on and authorized
(page 176).
i
The mobile phone must be inserted in the
cradle*.
i
There is a detailed description of how to
search for an address book entry in the “Search-
ing for an address book entry” section
(
page 166).

176 Control systemsCOMAND telephone*
Importing: Start data transfer on the
external device (see operating instruc-
tions of the device concerned).
If there is no address book entry with
the same first name and last name,
COMAND imports the data.
If there is already an address book en-
try with the same first name and last
name, a prompt will appear asking
whether the existing data should be
overwritten.

Select “Yes” or “No”.
The existing address book entry will be
overwritten or not, depending on your
selection.
Bluetooth
® settings
General information about Bluetooth
®
Bluetooth
® technology is the standard for
short-range wireless technologies, suitable
for transmitting voice and data. It is possi-
ble to connect Bluetooth
® devices wire-
lessly. Bluetooth
® can be used to
exchange vCards or make calls using a
headset.
Bluetooth
® technology uses the freely
available ISM (Industrial Scientific Medi-
cal) wireless network that works at
2.45 GHz. Ranges of up to ten meters are
possible with Bluetooth
®.
Activate or deactivate Bluetooth
®

Select “Telephone”
“Data/Connec-
tions”
“Bluetooth”
“Deactivate
Bluetooth”.
You have activated or deactivated
Bluetooth
®. A checkmark appears
when Bluetooth
® is deactivated.Connecting Bluetooth
® devices
It is possible to establish a Bluetooth
® con-
nection between COMAND and the follow-
ing types of device:


Mobile phone (only for transferring
business cards)


Headset


Laptop/PDA
You can connect up to twelve devices to
COMAND but only one device can be ac-
tive at a time.
The connection process includes search-
ing for the device and its subsequent au-
thorization.
i
To connect a Bluetooth
® device, the
Bluetooth
® function must be activated in
COMAND and in the device concerned. The
Bluetooth® device must also be set to “visible”
or “findable” in order for COMAND to find and
display it. For the setting procedures, please see
the operating instructions for the Bluetooth
®
device.

177 Control systems
COMAND telephone*
Calling up the Bluetooth
® device list
and searching for devices

Calling up the list: Select “Telephone”

“Data/Connections”
“Bluetooth”
“Search for Bluetooth devices”.
When you call up the list for the first
time after switching on COMAND, the
search for devices in the reception
range starts automatically. You will see
a display to this effect.
The device list appears after a short
while.
Canceling search:
Select “Cancel”.
The second time you call up the list, and
each time thereafter, the device list ap-
pears immediately if COMAND has not
been switched off and on again in the
meantime.

Starting search manually:
select “Update”.The device list can contain the following
devices:


All detected devices, whether autho-
rized or not.


All authorized devices, whether detect-
ed or not.
1Authorized and detected device – de-
vice and padlock symbol are the same
color
2Device which was not detected, but
which has been authorized in the past
– device and padlock symbol are differ-
ent colors (the device may be switched
off or not in the vehicle, for example)
3Newly detected device - not yet autho-
rized (no symbol)Displaying details of a Bluetooth
®
device

Call up the Bluetooth
® device list
(
page 177).

Select desired device.

Select “Details”.
The detailed display for this device ap-
pears.

Closing detailed display: Slide qmr
or ymz.
i
If the device list already contains twelve au-
thorized devices, you must revoke authorization
for one of the authorized devices. Then you must
switch this device off and then restart the
search. Any new devices for which you would like
to search will otherwise not appear in the list.

178 Control systemsCOMAND telephone*Authorizing a Bluetooth
® device

Call up Bluetooth
® device list
(
page 177).

Select unauthorized device.

Select “Authorize”.
The input menu for the passkey ap-
pears.

Entering passkey into COMAND:
Select the digits one by one.

Deleting digits: Select ) and briefly
press n.

Canceling entry into COMAND:
Select “Back”.

Confirming entry into COMAND:
Select?.

If necessary, enter the same passkey
into the Bluetooth
® device (see the op-
erating instructions for the device).
The device is authorized.
De-authorizing a Bluetooth
® device

Call up Bluetooth
® device list
(
page 177).

Select authorized device.

Select “De-authorize”.
A prompt appears asking whether you
really want to de-authorize this device.

Select “Yes” or “No”.
If you select “Yes”, the device will be
de-authorized.SMS messages (Short Message
Service)
SMS functions
The following functions are available:

Receive


Read
The following conditions must be fulfilled
in order to use the functions:


The mobile phone is inserted in the cra-
dle and switched on.


The PIN has been entered (only GSM
mobile phones).


The mobile phone is logged into a mo-
bile network.
i
The passkey is any one to sixteen-digit num-
ber which you can set yourself. You must enter
t he s ame n um ber in C OM AND an d als o in th e de-
vice to be authorized.
i
On devices which do not have an input key-
pad (e.g. headsets), the passkey is predeter-
mined. In this case, it is not necessary to enter
the number on the device itself. You will usually
find the passkey in the operating instructions for
the device.
i
If you de-authorize a device which has been
authorized in the past and which is not detected
in the search, this device will no longer be dis-
played in the device list.
Devices which have been authorized in the past
but which are not detected in the search are ei-
ther not switched on or not in the vehicle.

520 Controls in detailUseful featuresWhen the mobile phone is inserted in the
cradle, you can operate the telephone us-
ing the following devices:

mobile phone keypad


COMAND telephone keypad
(page 140)


buttonss andt on the multi-
function steering wheel (
page 283)


Voice Control (
page 308)


Bluetooth
® headset (
page 153)
Please note that these functions are only
available with Mercedes-Benz approved
mobile phones. Please contact an autho-
rized Mercedes-Benz Center for informa-
tion on features available for your mobile
phone of choice.

Open telephone compartment
(page 510).Inserting mobile phone in mobile phone
cradle
Once the mobile phone has been inserted
in the mobile phone cradle, you have to
use the hands-free device or Bluetooth
headset to respond during phone calls.

If applicable, remove the cover for the
external antenna connection from the
back of the mobile phone and store it in
a s a f e p l a c e . B e s u r e t o c o m p l y w i t h t h e
mobile phone’s operating instructions,
as well.
Example illustration1Insert the mobile phone
2Connector contact
3Mobile phone cradle
Slide the lower end of the mobile phone
into connector contact 2 on
cradle3.

Push the top of the mobile phone in di-
rection of arrow 1, until the lug on the
mobile phone release button engages.
The mobile phone is connected to the
network via the external antenna.
!
Do not try to remove the mobile phone along
with the cradle. You could otherwise damage the
mobile phone cradle.

745 Index
Message in display 655
Reconnecting 706
Removing 705
Bead 586
Beverage holder see Cup holder
Blind Spot Assist* 485
Messages in display 633
Bluetooth
®
Settings (COMAND) 176
Brake assist system (BAS Plus) 68
Brake assist system (BAS) 67
Brake fluid 552, 735, 736
Brake lamp bulbs 689
Brake lamp, high mounted 689
Brake pads
Message in display 645
Brake warning lamp 31
Brakes 540
High-performance brake system
(CL 63 AMG and CL 65 AMG) 541
Warning lamp 31, 609
Break-in period 538Bulbs, replacing 688
Additional turn signals 689
Brake lamps 689
Fog lamps 689
Front lamps 689
High beam 689
High mounted brake lamp 689
License plate lamps 689
Low beam 689
Parking and standing lamps 689
Rear fog lamp 689
Turn signal lamps 689C
California retail buyers and lessees,
important notice for 15
Can holder see Cup holder
Capacities and recommended
fuel/lubricants 733
Carpets, Cleaning and care of 605
Catalytic converter 548
CD
Ejecting (COMAND) 118
Loading (COMAND) 116
Menu overview (COMAND) 119
Playback options (COMAND) 124
Selecting a medium (COMAND) 122
Selecting a track (COMAND) 122
CD (COMAND) 112
Central locking
Automatic 363
Locking/unlocking from inside 364
Central locking/unlocking switches 364
Certification label 722
Change of address or ownership 16
Children in the vehicle 57
Air bags 57
Blocking of rear side window
operation 63

761 Index
Storage tray/telephone* compartment
in front armrest 510
Under the front seats 511
Storing tires 563
Summer opening feature 404
Sun visors 516
Sunroof see Power tilt/sliding sunroof
Sunshades
Extending or retracting rear window
sunshade (COMAND) 267
Suspension tuning
Setting (ABC) 461
Symbols used in this operator’s
manual 19
System settings (COMAND)
Bluetooth
® settings 176
Display 255
Favorite button 259
Menu overview 255
Reset 259
Setting the system language 258
Time settings 255
Voice Control settings
(COMAND) 257T
Tachometer 435
Overspeed range 435
Tail lamps
Cleaning lenses 599
Messages in display 668
Tar stains 596
Tele Aid 522
Automatic Maintenance Call 530
Call priority 528
Emergency calls 523
Hands-free microphone 37
Information 527
Information button 525
Initiating an emergency call
manually 525
Messages in display 675
Remote door lock 529
Remote door unlock 529
Roadside Assistance 526
Roadside Assistance button 525
SOS button 525
Stolen Vehicle Recovery
services 530
System self-check 523Telephone cradle
Changing 521
Telephone* 519
“911” emergency call
(COMAND) 141
Accepting/ending a call
(COMAND) 148
Answering/ending a call (Instrument
cluster control system) 297
Call lists (COMAND) 146
Changing mobile phone cradle 521
Compartment 510
Dialing (Instrument cluster control
system) 296
Entering the telephone number
(COMAND) 149
Hands-free microphone 37
Inserting in cradle 520
Installing a different mobile
phone cradle 522
Operation 294
Operation (COMAND) 137
Phone book (COMAND) 154
Phone book (Instrument cluster
control system) 296
PIN (COMAND) 142