2008 MERCEDES-BENZ C300 ignition

362 Operation
Maintenance
We strongly recommend that you have
your vehicle serviced at an authorized
Mercedes-Benz Center, in accordance with
the Maintenance Booklet at the times
called for by the maintenance service
indicator.
Maintenance service indicator
message
The maintenance service indicator
message will notify you when the next
maintenance service is due.
Starting approximately 1 month before the
next maintenance service is due, one of
the following messages will appear in the
multifunction display while you are driving
or when you switch on the ignition
(example service A):
Next Service A Due in XXXX miles (km)
Next Service A Due in XXX days
Service A Due
The type of maintenance service due is
indicated in the message that appears in
the multifunction display:
ABasic service
(approximately 1 hour)
BExtended service
(approximately 8 hours)
An additional number or a further letter in
combination with the maintenance type
can be indicated. This indicates that
further auxiliary maintenance work is
required. Contact an authorized
Mercedes-Benz Center for more
information.
To clear the maintenance service
indicator message: Press
buttonL or button# on the
multifunction steering wheel
(
page 152).
The maintenance service indicator
message is cleared and the standard
display appears in the multifunction
display (
page 151).
!Failure to have the vehicle maintained in
accordance with the Maintenance Booklet and
maintenance service indicator at the designated
times /mileage will result in vehicle damage not
covered by the Mercedes-Benz Limited
Warranty.
iThe Maintenance System in your vehicle
tracks distance driven and the time elapsed
since the last maintenance service and calcu-
lates other maintenance service work required.
iThe maintenance service indicator message
is automatically cleared

after approximately 10 seconds when you
switch on the ignition or when reaching the
maintenance service threshold while driving

after approximately 30 seconds, once the
suggested maintenance service term has
passed
You can also clear it yourself.

363 Operation
Maintenance
Maintenance service term exceeded
If you have exceeded the suggested main-
tenance service term, you will see the fol-
lowing message in the multifunction
display:
Service A Exceeded by XXXX miles (km)
Service A Exceeded by XXX days
In addition, a signal sounds when the mes-
sage appears.
Any authorized Mercedes-Benz Center will
reset the maintenance service indicator
following a completed maintenance
service.
Calling up the maintenance service
indicator display
You can call up the maintenance service in-
dicator display at any time to check when
the next maintenance service is due.
Switch on the ignition.
The standard display of the control sys-
tem appears (
page 156).
Press ( or & on multifunction
steering wheel to select
Service menu.
Press % or $ to select the main-
tenance service indicator display.
Press #.
The service deadline appears in the
multifunction display.Resetting the maintenance service
indicator
In the event that the maintenance service
on your vehicle is not carried out at an
authorized Mercedes-Benz Center, you can
have the maintenance service indicator
reset. The automotive maintenance facility
carrying out the maintenance service will
find the information for resetting the
maintenance service indicator in the
maintenance-relevant information for your
vehicle. Such information is available from
either your authorized Mercedes-Benz
Center or directly from Mercedes-Benz.
iThe menu overview can be found on
(
page 154).
iIf the battery is disconnected, the days of
disconnection will not be included in the count
shown by the maintenance service indicator.
To arrive at the true maintenance service
deadline, you will need to subtract these days
from the days shown in the maintenance service
indicator message or maintenance service
indicator display.
iIf the maintenance service indicator was
inadvertently reset, have an authorized
Mercedes-Benz Center correct it.
Only reset if the proper maintenance service has
been performed. Resetting the system without
performing the proper service as called for by
the maintenance service indicator will result in
engine damage and/or other vehicle damage not
covered by the Mercedes-Benz Limited
Warranty.

378 Practical hints
What to do if …?
ProblemPossible cause/consequenceSuggested solution
±The yellow engine malfunc-
tion indicator lamp comes
on while driving.There is a malfunction in:

The fuel management system

The ignition system

The emission control system

Systems which affect emissions
Such malfunctions may result in excessive
emissions values and may switch the en-
gine to its limp-home (emergency opera-
tion) mode.
Have the vehicle checked as soon as
possible at an authorized
Mercedes-Benz Center.
An on-board diagnostic connector is
used by the service station to link the
vehicle to the shop diagnostics system.
It allows the accurate identification of
system malfunctions through the read-
out of diagnostic trouble codes. It is lo-
cated in the front left area of the
footwell next to the parking brake pedal.
iIn some states you may be required by law
to have the vehicle serviced as soon as the
engine malfunction indicator lamp comes on.
Check local requirements.

388 Practical hints
What to do if …?
On the pages that follow, you will find a
compilation of the most important warning
and malfunction messages that may ap-
pear in the malfunction display.
For your convenience the messages are di-
vided into two sections:

Text messages (page 389)

Symbol messages (page 397)
Warning!G
All categories of messages contain impor-
tant information which should be taken note
of and, where a malfunction is indicated, ad-
dressed as soon as possible at an autho-
rized Mercedes-Benz Center.
Failure to repair condition noted may cause
damage not covered by the Mercedes-Benz
Limited Warranty, or result in property dam-
age or personal injury.
iSwitching on the ignition causes all instru-
ment cluster lamps (except high beam headlamp
indicator lamp and turn signal indicator lamps
unless activated) as well as the multifunction dis-
play to come on. Make sure the lamps and multi-
function display are in working order before
starting your journey.

393 Practical hints
What to do if …?
Display Possible cause/consequencePossible solution
Front Passenger
Airbag Disabled
See Operator’s Manu-
alFront passenger front air bag is
deactivated while driving even
though an adult or someone
larger than a small individual is
occupying the front passenger
seat. Forces acting on the seat
may make the system sense a
decrease in weight.Stop the vehicle in a safe location as soon as possible and check the front
passenger seat for the following:
Switch off the ignition (page 82).
Have the front passenger vacate the seat and exit the vehicle.
Keep the seat unoccupied, close the front passenger door and switch
on the ignition (
page 82).
Monitor the
5/indicator lamp right of the instrument cluster
(
page 45) and the multifunction display in the instrument cluster
(
page 151) for the following:
(Continued on next page)

394 Practical hints
What to do if …?
Display Possible cause/consequencePossible solution
Front Passenger
Airbag Disabled
See Operator’s Manu-
alWith the seat unoccupied and the ignition switched on (page 82),

the 5/indicator lamp right of the instrument cluster should il-
luminate and remain illuminated, indicating that the OCS (
page 41)
has deactivated the air bag.

the message Front Passenger Airbag Enabled See Operator’s Man-
ual
or the message Front Passenger Airbag Disabled See Opera-
tor’s Manual
should not appear in the multifunction display at any time
the seat is unoccupied. Wait at least 60 seconds for the system to com-
plete the necessary check cycles and to make sure neither message ap-
pears in the multifunction display.
If above conditions are met, you can occupy the front passenger seat again.
Depending on the front passenger classification sensed by the OCS
(
page 41), the5/indicator lamp will remain illuminated or go
out.
If above conditions are not met, the system is not working properly. Have
the system checked as soon as possible at an authorized Mercedes-Benz
Center.
Warning!G
If the 5/indicator lamp remains
illuminated with an adult occupant on the
front passenger seat even after performing
the above corrective steps, do not have any
passenger use the front passenger seat until
the system has been repaired.

395 Practical hints
What to do if …?
Display Possible cause/consequencePossible solution
Front Passenger
Airbag Enabled
See Operator’s Manu-
alFront passenger front air bag is
activated while driving even
though a child, small individual,
or object below the system’s
weight threshold is on the front
passenger seat, or the front pas-
senger seat is empty. Objects
on the seat or forces acting on
the seat may make the system
sense supplemental weight.Stop the vehicle in a safe location as soon as possible and check the front
passenger seat for the following:
Switch off the ignition (page 82).
Remove child and child restraint from front passenger seat and properly
secure the child in rear seat employing the child restraint if necessary.
Make sure no objects which apply forces to the seat are present (e.g.
objects such as books, briefcases etc. lodged behind or around the
seat, head restraints pushing against roof, etc.). The system may recog-
nize such forces as supplemental weight and sense that an occupant on
the front passenger seat is of a greater weight than actually present.
Keep the seat unoccupied, close the front passenger door and switch
on the ignition (
page 82).
Monitor the
5/indicator lamp right of the instrument cluster
(
page 45) and the multifunction display in the instrument cluster
(
page 151) for the following:
(Continued on next page)

396 Practical hints
What to do if …?
Display Possible cause/consequencePossible solution
Front Passenger
Airbag Enabled
See Operator’s Manu-
alWith the seat unoccupied and the ignition switched on (page 82),

the 5/indicator lamp right of the instrument cluster should il-
luminate and remain illuminated, indicating that the OCS (
page 41)
has deactivated the air bag.

the message Front Passenger Airbag Enabled See Operator’s Man-
ual
or the message Front Passenger Airbag Disabled See Opera-
tor’s Manual
should not appear in the multifunction display at any time
the seat is unoccupied. Wait at least 60 seconds for the system to com-
plete the necessary check cycles and to make sure neither message ap-
pears in the multifunction display.
If above conditions are met, you can occupy the front passenger seat again.
Depending on the front passenger classification sensed by the OCS
(
page 41), the 5/indicator lamp will remain illuminated or go
out.
If above conditions are not met, the system is not working properly. Have
the system checked as soon as possible at an authorized Mercedes-Benz
Center.
Warning!G
If the 5/indicator lamp remains
illuminated with an adult occupant on the
front passenger seat even after performing
the above corrective steps, do not have any
passenger use the front passenger seat until
the system has been repaired.