2008 MERCEDES-BENZ C300 radio controls

190 Controls in detail
Audio system
Example Bass
To change setting: Slide rmq or
rotateymz until desired treble or bass
setting is reached.
To save setting: Press n.
The setting is stored and the menu is
exited.
To exit menu without saving: Press
button í or slideomp.Adjusting balance or fader
Balance is used to determine whether the
sound focus should be shifted toward the
driver’s side or the passenger’s side.
Fader is used to determine whether the
sound focus should be shifted toward the
front or rear of the vehicle
Select Sound
Bal/Fad.
The current setting is indicated by an
red cross-hair symbol.
Adjusting balance and fader
To change setting: Slide rmq or omp
until desired balance/fader setting is
achieved.
To save setting: Press n.The setting is stored and the menu is
exited.
To exit menu without saving: Press
button í.
Surround sound* (Canada only)
If your vehicle is equipped with the har-
mann/kardon LOGIC7
® Surround Sound
system, you can choose between
LOGIC7®
On
and LOGIC7® Off for surround sound.
Harman/kardon LOGIC7
® Surround Sound
is available for the following operating
modes:

Radio (FM only)

Sat*

CD audio

MP3

AUX


191 Controls in detail
Audio system
Adjusting surround sound
With surround sound, you can choose be-
tween
LOGIC7® On and LOGIC7® Off.
Select Sound
Sound.
A dot R indicates the current setting.
To select a setting: Slidermq or
rotateymz.
To save setting: Press n.
The setting is stored and the menu is
exited.
To exit menu without saving: Press
button í or slideomp.
iThe LOGIC7® On function of the
harman/kardon LOGIC7® Surround Sound sys-
tem permits the playback of discrete 5.1 and ste-
reo recordings with an optimal surround sound
platform for each passenger.
The LOGIC7
® distributes the 5.1 surround infor-
mation over the 13-channel system architecture
to provide the optimum sound experience from
all seats. This produces the sound characteristic
as intended by the sound engineer during the
original recording.
Harman/kardon LOGIC7
® converts all two-chan-
nel stereo sound material into multi-channel sur-
round sound. The surround information stored
during the original recording is read out using
LOGIC7
® and likewise distributed over the
13 channels. No effects are created during this
process; only that which was already there be-
comes audible.
In addition, harman/kardon LOGIC7
® moves the
perceived sound source away from the individual
loudspeakers, thus generating a natural 360°
sound experience for each passenger.
iBy selecting LOGIC7® Off, all compatible
formats are played back as they are present on
the medium. Due to the vehicle’s spatial charac-
teristics, an optimal sound experience is not en-
sured from all seats.
iBalance and fader will be set to the default
value (0/0) automatically by activating or deacti-
vating LOGIC7
®.
iPlease note the following:

For an optimal sound experience from all
seats, the balance and fader should be ad-
justed to the center of the passenger com-
partment with LOGIC7
® switched on.

The best sound results are achieved when
playing high-quality audio CDs.

For MP3 tracks, the bit rate should be at
least 128 kbit/s.

Surround playback cannot be activated in
mono-signal sources as AM or Weatherband.
It will not function for mono-signal sources
as, e.g. mono audio tracks on some specific
audio CDs.

In the case of poor radio reception quality,
e.g. in tunnels, LOGIC7® should be switched
off, as otherwise a dynamic switchover from
stereo to mono and thus temporary sound
characteristic shifts can occur.

With certain stereo recordings, the resulting
sound characteristic may deviate from con-
ventional stereo playback.

194 Controls in detail
Audio system
Radio operation
The radio mode is interrupted by an
incoming call on the telephone*
(
page 222).
iThe language select in the Audio system is
also used for the displays and messages in the
multifunction display.
Available languages:

German

English

Spanish

French

Italian
Warning!G
Please devote your attention first and fore-
most to the traffic situation you are in.
Before your journey, please familiarize your-
self with the radio functions.
Only use the audio system when road and
traffic conditions permit you to do so. Other-
wise you could be involved in an accident in
which you or others could be injured.
!Do not attach metallic film to the inside or
outside of windows which are fitted with an aeri-
al. Obstructing the metallic aerial structure on
the window will interfere with radio reception.
Cutting the film on the window can permanently
damage the aerial wires.

195 Controls in detail
Audio system
Menu overview
iThe components and operating principles of
the audios system can be found on
(
page 187). Information about sound settings
can be found on(
page 189).
Radio
(except Weather Band)Presets
(except Weather Band)Channel
(only Weather Band)Sound
Enter frequencyAutostoreList of channelsTreble
Station information
(in FM waveband only)List of stored stationsBass
Balance/Fader
Surround sound*

196 Controls in detail
Audio system
Switching to radio mode
Press buttonb on audio control
unit.
The radio basic menu appears in the
audio display once you have switched
to radio mode. You will hear the
station/channel last tuned in the previ-
ously selected waveband, provided
that the station/channel can be re-
ceived.
Illustration: radio mode in FM waveband
1Status line
2Station name
3Store position of station
4Main area with wavebandInformation displayed in the status line
(example)
The following information is displayed in
the status line:

Time (04:38)

Station name (WNYC)
Mobile phone readiness is indicated by
additional information being shown:

Mobile phone network signal
strengthI

Receiver symbol 4 ö.Calling up wavebands
You can choose from among the FM, AM
and WB wavebands and then request the
Sat mode*. Pressing again will switch back
to FM radio mode.
Press buttonb on audio control
unit repeatedly until desired waveband
has been selected.
The FM, AM, and WB wavebands and
the satellite radio* mode are called up
one after another.
The waveband currently selected
appears in the status line of the audio
display. The last selected station in the
selected waveband is heard.
iStation names 3, available for the FM
waveband, can only be seen when the station
transmits a name.
In the WB waveband, the audio system displays
the channel number, e. g. Channel 6, instead of
the station names and/or frequency.
WavebandFrequency
WB (Weather Band)Weather channels
FM87.7......107.9 MHz
AM530.......1 710 KHz

198 Controls in detail
Audio system
Tuning to a station by entering the fre-
quency manually
b
Radio
Enter Frequency
The menu for manual frequency entry
appears.
or
Press buttonó, on the keypad in
audio control unit briefly.
Enter frequency with keypad:
Enter desired frequency with
buttons1to R, with the keypad
in audio control unit briefly.
The audio system tunes in to the fre-
quency entered.
Exiting menu without making an en-
try: Press button í in the center
console (
page 184).Storing stations
You can store ten AM and ten FM stations
in the memory.
Storing stations manually with keypad
Tune in desired station.
Basic menu is shown in the audio
display.
Press and hold desired station
button1 to R until a brief signal
tone sounds.
The station is stored.
iThis function is not available for Weather
Band.
iIt is not possible to enter a frequency in the
respective waveband which is outside the fre-
quency range.
iIf you select a memory preset which is al-
ready in use, it will be overwritten by the new
station.

200 Controls in detail
Audio system
Satellite radio*
Submenu overview
Warning!G
Please devote your attention first and fore-
most to the traffic situation you are in.
Before your journey, please familiarize your-
self with the radio functions.
Only use the audio system when road and
traffic conditions permit you to do so. Other-
wise you could be involved in an accident in
which you or others could be injured.
iThe components and operating principles of
the audio system can be found on (
page 187).
Sat Presets Info Category Sound
Channel ListStation presets Show program infoAll channelsTreble
Channel Entry Select categoryBass
ServiceBalance/Fader
Surround sound*

201 Controls in detail
Audio system
Satellite radio
SIRIUS Satellite Radio provides over
130 channels of digital-quality radio, in-
cluding 100% commercial-free music,
sports, news and entertainment. SIRIUS
Satellite Radio uses a fleet of high-orbit
satellites to broadcast 24 hours per day,
coast to coast, in the contiguous U.S. and
Canada.
This diverse, satellite-delivered program-
ming is available for a monthly subscrip-
tion fee.
For more information and service availabil-
ity call the SIRIUS Service Center
(
page 207) (1-888-539-7474), or con-
tact

www.sirius.com (USA)

www.siriuscanada.com (Canada)Subscribing to satellite radio
Press buttonb on audio control
unit repeatedly until satellite radio Sat
is selected.
The following options are possible:

Satellite radio service is not
activated

Satellite radio service is fully
activated
iAdditional satellite radio equipment and a
subscription to SIRIUS Satellite Radio service
provider are required for the satellite radio oper-
ation described in this chapter.
Contact an authorized Mercedes-Benz Center
for details and availability for your vehicle.
iNote that categories and channels shown in
illustrations are dependent on programming con-
tent delivered by the service provider. Program-
ming content is subject to change. Therefore,
channels and categories shown in illustrations
and descriptions contained in this manual may
differ from the channels and categories
delivered by the service provider.
iSatellite radio service may be unavailable or
interrupted from time to time for a variety of rea-
sons, such as environmental or topographic con-
ditions and other things we can’t control. Service
might also not be available in certain places
(e.g., in tunnels, parking garages, or within or
next to buildings) or near other technologies. In
such situations, the satellite radio’s main menu
shows the “Acquiring signal...” screen. At this
point, the radio’s functions are restricted and the
service info display (
page 207) appears.
iIf a satellite receiver is not installed or not
properly installed:
The message
Device unavailable will ap-
pear.
If the satellite radio service is not activated, the
“SIRIUS Preview” display appears.