2008 MERCEDES-BENZ C300 Button functions

264 Controls in detail
3-zone automatic climate control* (Canada only)
Front defroster
You can use this setting to defrost the
windshield, for example if it is iced up. You
can also defog the windshield and the side
windows.
Activating: Press buttony
(
page 259).
The indicator lamp in the button comes
on.
The air conditioning switches
automatically to the following functions:

cooling on to dehumidify

most efficient blower speed and
heating power, depending on out-
side temperature

air flows onto the windshield and
the front side windows

the air recirculation mode is
switched off
Deactivating: Press buttony
(
page 259) again.
The indicator lamp in the button goes
out. Defrosting is turned off.
The previous settings are once again in
effect.Windshield fogged on the outsideSwitch the windshield wipers on
(
page 118).
If the automatic mode of the climate con-
trol is switched off:
Press righta and/or lefte air distri-
bution buttonZ (
page 259) re-
peatedly until one of the following
symbols appears in
displayd:aorY
(
page 259).
iKeep this setting selected only until the
windshield is clear again.
iYou can adjust the air distribution when the
front defroster is switched on.
iTo switch defrosting off, you can also press
button´, U,·,Q or temperature
controls1 and8 (
page 259).
iThe cooling remains switched on.
iKeep this setting selected only until the
windshield is clear again.

296 Controls in detail
Useful features
System self-check
Initially, after switching on the ignition,
malfunctions are detected and indicated.
If a malfunction is detected, the indicator
lamps in the SOS button, the Roadside As-
sistance button*b and the Information
button*} stay on longer than
10 seconds or do not come on. The mes-
sage
Tele Aid not activated or Tele Aid
inoperative
appears in the multifunction
display.Emergency calls
An emergency call is initiated
automatically following an accident in
which the emergency tensioning devices
(ETDs) or air bags deploy.
An emergency call can also be initiated
manually by opening the cover next to the
interior rear view mirror labeled SOS, then
briefly pressing the button located under
the cover. For instructions on initiating an
emergency call manually (
page 298).
Once the emergency call is in progress, the
indicator lamp in the SOS button will begin
to flash. The message:

Connecting call appears in the multi-
function display
and the audio system is muted. When the
connection is established, the message:

Call connected appears in the multi-
function display
Warning!G
If the indicator lamps in the SOS button, in
the Roadside Assistance button*b
and/or in the Information button*}do
not come on during the system self-check,
or if any of these indicators remain illuminat-
ed continuously in red and/or the message
Tele Aid not activated or Tele Aid
inoperative
is displayed in the multifunc-
tion display after the system self-check, a
malfunction in the system has been detect-
ed.
If a malfunction is indicated as outlined
above, the system may not operate as ex-
pected. Have the system checked at the
nearest Mercedes-Benz Center as soon as
possible.

344 Operation
Tires and wheels
If you wish to cancel activation:
Press button $or% to select
No.
Press button# to confirm.
The previous settings will not be
changed
or
Wait until the message
Run Flat Indicator?
Restart
disappears.
Checking tire pressure electronically
with the Tire Pressure Monitoring
System (TPMS), (USA only)The TPMS only functions on wheels that
are equipped with the proper electronic
sensors. It monitors the tire inflation pres-
sure, as selected by the driver, in all four
tires. A warning is issued to alert you to a
decrease in pressure in one or more of the
tires.
iThe Tire Pressure Monitoring System
(TPMS) is equipped with a combination low tire
pressure/TPMS malfunction telltale in the
instrument cluster (
page 26). Depending on
how the telltale illuminates, it indicates a low tire
pressure condition or a malfunction in the TPMS
system itself:

If the telltale illuminates continuously, one
or more of your tires is significantly underin-
flated. There is no malfunction in the TPMS.

If the telltale flashes for 60 seconds and
then stays illuminated, the TPMS system
itself is not operating properly.
iThis device complies with Part 15 of the
FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interfer-
ence, and
(2) this device must accept any interference
received, including interference that may
cause undesired operation.
Any unauthorized modification to this device
could void the user’s authority to operate the
equipment.
Warning!G
The TPMS does not indicate a warning for
wrongly selected inflation pressures. Always
adjust tire inflation pressure according to
the Tire and Loading Information placard on
the driver’s door B-pillar or, if available, the
supplemental tire pressure information on
the inside of the fuel filler flap.
The TPMS is not able to issue a warning due
to a sudden dramatic loss of pressure (e.g.
tire blowout caused by a foreign object). In
this case bring the vehicle to a halt by care-
fully applying the brakes and avoiding
abrupt steering maneuvers.