2008 MERCEDES-BENZ C300 4MATIC garage door opener

Contents
3-zone automatic climate control*
(Canada only) ..................................... 259
Deactivating
climate control system ................. 261
Operating climate control
system in automatic mode ........... 261
Setting the temperature ............... 262
Adjusting air distribution .............. 263
Adjusting air volume..................... 263
Using driver-side settings for
all temperature zones................... 263
Front defroster ............................. 264
Rear window defroster ................. 265
Air recirculation mode .................. 265
Residual engine heat
and ventilation.............................. 266
Air conditioning ............................ 267
Rear climate control ..................... 268
Trunk ................................................. 269
Opening trunk .............................. 269
Closing trunk ................................ 270
Trunk emergency release ............. 271
Valet locking ................................ 272
Power tilt/sliding sunroof .................. 273
Opening and closing
power tilt/sliding sunroof............. 273Synchronizing............................... 275
Panorama roof with
power tilt/sliding panel* ................... 276
Roller sunblinds............................ 276
Opening and closing panorama
roof with power tilt/sliding panel . 277
Synchronizing............................... 278
Loading and storing ........................... 280
Roof rack*.................................... 280
Split rear bench seat* .................. 281
Loading instructions..................... 282
Storage compartments ................ 283
Cup holders.................................. 287
Trunk ............................................ 288
Useful features .................................. 289
Sun visors .................................... 289
Rear window sunshade* .............. 290
Ashtrays ....................................... 291
Cigarette lighter ........................... 292
Power outlet in the glove box ....... 293
Power outlet in the
rear passenger compartment ....... 293
Floormats* ................................... 294
lTele Aid* ..................................... 295
Garage door opener* ................... 303
Operation......................................... 309
The first 1000 miles (1500 km) ......... 310
Driving instructions ........................... 311
Drive sensibly – save fuel............. 311
Drinking and driving ..................... 311
Pedals .......................................... 311
Power assistance ......................... 311
Brakes.......................................... 312
Driving off .................................... 314
Parking......................................... 314
Tires ............................................. 315
Hydroplaning................................ 315
Tire traction ................................. 316
Tire speed rating .......................... 316
Winter driving instructions ........... 317
Standing water............................. 318
Passenger compartment .............. 318
Driving abroad ............................. 318
Control and operation
of radio transmitters .................... 319
Catalytic converter....................... 319
Emission control .......................... 320
Coolant temperature.................... 321

31 At a glance
Overhead control panel
Overhead control panel
ItemPage
1Rear interior lighting on/off116
2Interior lighting control115
3Right reading lamp on/off115
4Power tilt/sliding sunroof
or
Panorama roof with power
tilt/sliding panel*273
276
5Information button*300
6Tele Aid* (emergency call
system) button295
ItemPage
7Rear view mirror 97
8Garage door opener*303
9Hands-free microphone for

Tele Aid* (emergency call
system)

Telephone*

Voice Control*1
295
160
aRoadside Assistance button*299
bLeft reading lamp on/off115
cFront interior lighting on/off114
1Voice Control* is only available with COMAND*.
Refer to separate operating instructions.

303 Controls in detail
Useful features
Garage door opener*
The integrated remote control is capable of
operating up to three separately controlled
devices. It provides a convenient way to re-
place up to three hand-held remote con-
trols used to operate devices such as
garage door openers, gate openers, or oth-
er devices compatible with HomeLink
® or
some other systems.
Before the integrated remote control can
be used, it must be programmed to the ga-
rage door opener, gate operator or other
device you wish to operate. See the follow-
ing instructions for programming informa-
tion.
Interior rear view mirror with integrated
remote control
1Indicator lamp
2 3 4Signal transmitter button
Needed for programming (not part of vehi-
cle equipment):
5Hand-held remote control of ga-
rage door opener, gate operator
or other device
6Hand-held remote control
button
Warning!G
Before programming the integrated remote
control to a garage door opener or gate
operator, make sure people and objects are
out of the way of the device to prevent po-
tential harm or damage. When programming
a garage door opener, the door moves up or
down. When programming a gate operator,
the gate opens or closes.
Do not use the integrated remote control
with any garage door opener that lacks
safety stop and reverse features as required
by U.S. federal safety standards (this
includes any garage door opener model
manufactured before April 1, 1982).
A garage door that cannot detect an object
– signaling the door to stop and reverse –
does not meet current U.S. federal safety
standards.
When programming a garage door opener,
park the vehicle outside the garage.


305 Controls in detail
Useful features
Step 7:
To program the remaining two signal
transmitter buttons, repeat the steps
above starting with step 3.
Rolling code programming
To train a garage door opener (or other
rolling code devices) with the rolling code
feature, follow these instructions after
completing the “Programming” portion
(steps 1 through 6) of this text. (A second
person may make the following training
procedures quicker and easier.)
Step 8:
Locate “training” button on the garage
door opener motor head unit.
Exact location and color of the button
may vary by garage door opener brand.
Depending on manufacturer, the “training” button may also be referred
to as “learn”or “smart” button. If there
is difficulty locating the transmitting
button, refer to the garage door opener
operator’s manual.
Step 9:
Press the “training” button on the ga-
rage door opener motor head unit.
The “training light” is activated.
You have 30 seconds to initiate the follow-
ing two steps.
Step 10:
Return to the vehicle and firmly press,
hold for 2 seconds and release the pro-
grammed signal transmitter button
(2, 3 or4).
Step 11:
Press, hold for 2 seconds and release
same signal transmitter button a sec-
ond time to complete the training pro-
cess.Step 12:
Confirm the garage door operation by
pressing the programmed signal trans-
mitter button (2, 3 or4).
Step 13:
To program the remaining two signal
transmitter buttons, repeat the steps
above starting with step 3.
Gate operator/Canadian programming
Canadian radio-frequency laws require
transmitter signals to “time-out” (or quit)
after several seconds of transmission
which may not be long enough for the
integrated signal transmitter to pick up the
signal during programming. Similar to this
Canadian law, some U.S. gate operators
are designed to “time-out” in the same
manner.
iIf indicator lamp1 flashes rapidly for about
2 seconds and then turns to a constant light,
continue with programming steps 8 through 12
as your garage door opener may be equipped
with the “rolling code” feature.iSome garage door openers (or other rolling
code equipped devices) may require you to
press, hold for 2 seconds and release the same
signal transmitter button a third time to com-
plete the training process.

307 Controls in detail
Useful features
Programming tips
If you are having difficulty programming
the integrated remote control, here are
some helpful tips:

Check the frequency of hand-held re-
mote control5 (typically located on
the reverse side of the remote). The in-
tegrated remote control is compatible
with radio-frequency devices operating
between 280-390 MHz.

Put a new battery in hand-held remote
control5. This will increase the likeli-
hood of the hand-held remote control
sending a faster and more accurate sig-
nal to the integrated remote control.

While performing step 3, hold
hand-held remote control5 at differ-
ent lengths and angles from the signal
transmitter button (2, 3 or4) you
are programming. Attempt varying an-
gles at the distance of 2 to 5 in
(5 to 12 cm) away or the same angle at
varying distances.

If another hand-held remote control is
available for the same device, try the
programming steps again using that
other hand-held remote control. Make
sure new batteries are in the hand-held
remote control before beginning the
procedure.

Straighten the antenna wire from the
garage door opener assembly. This
may help improve transmitting and/or
receiving signals.
iCertain types of garage door openers are in-
compatible with the integrated remote control. If
you should experience further difficulties with
programming the integrated remote control,
contact an authorized Mercedes-Benz Center, or
call Mercedes-Benz Customer Assistance Cen-
ter (in the USA only) at 1-800-FOR-MERCedes, or
Customer Service (in Canada) at
1-800-387-0100.
iUSA only:
This device complies with Part 15 of the
FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interfer-
ence, and
(2) this device must accept any interference re-
ceived, including interference that may
cause undesired operation.
Any unauthorized modification to this device
could void the user’s authority to operate the
equipment.
iCanada only:
This device complies with RSS-210 of Industry
Canada. Operation is subject to the following
two conditions:
(1) This device may not cause interference, and
(2) this device must accept any interference re-
ceived, including interference that may
cause undesired operation of the device.
Any unauthorized modification to this device
could void the user’s authority to operate the
equipment.

494 Index
Fuel cap
Message in display 406
Fuel consumption statistics
From start 156
Resetting 157
Since last reset 157
Fuel filler flap 322
Locking/Unlocking 322
Fuel tank
Capacity 478
Filler flap 322
Fuels, coolants, lubricants etc.
Capacities 476
Fuses 456
Fuse box in engine compartment 457
Fuse box in passenger
compartment 457
Fuse box in trunk 458
Replacing 456G
Garage door opener 303
Gasoline also see Fuel
GAWR 357
Gear range
Automatic transmission 143
Limiting 143
Shifting into optimal 145
Gear selector lever 126, 137
Messages in display 392
Position, Automatic
transmission* 139, 151
Shifting procedure 139
Gear selector lever one-touch gearshifting
Automatic transmission* 145
Gear selector lever* 138
Gearshift pattern 138
Lock 127
Position, Automatic
transmission* 140
Unlocking in an emergency 426
Glove box 284
Aux socket 220
Power outlet 293
Gloves, Vehicle tool kit 420GPS
Tele Aid* 295
Gross Axle Weight Rating see GAWR
Gross Vehicle Weight Rating see GVWR
Gross Vehicle Weight see GVW
GVW 357
GVWR 357