2008 MERCEDES-BENZ C-Class ad blue

90 Telephone
Activating the mobile phone
The following conditions must be met for a
“911” emergency call:

Phone switched on

Mobile phone network available

Valid SIM card in the phone
(not required on all mobile phone net-
works)

Mobile phone connected with
COMAND via Bluetooth®
If you are unable to make an emergency
call, you will have to initiate rescue mea-
sures yourself.
The “911” emergency number is a public
service. Any abuse is punishable by law.
Enter the digits on the COMAND con-
trol unit (
page 101).
Press thew button.
The phone establishes the connection.
Wait until the emergency call centre
answers, then describe the emergency.
“911” emergency call
G Warning
The 911 emergency call system is a public
service. Using it without due cause is a
criminal offense.

109 Telephone
Address book
i The mobile phone must be connected via
the Bluetooth® interface.
Display the details for an entry and
highlight the phone number data field
(
page 107).
Press n.
The phone initiates the call. The display
switches to the phone mode display.
or
Select “Options” K “Call”.
The phone initiates the call.
i You can use this function as soon as you
have saved a destination in the destination mem-
ory (
page 159). COMAND then also saves the
destination in the address book with the com-
plete address data that support navigation.
Search for an address book entry with
the Q symbol (
page 106).
Display the details for an entry and
highlight the address data field
(
page 107).
Press n.
i Pressing n only functions if the address
data field contains complete data that support
navigation. This is indicated by the Q symbol.
or
Select “Options” K “Navigate”.
i “Navigate” can only be selected if the ad-
dress data field contains complete data that sup-
port navigation. This is indicated by the Q
symbol.
1Address that supports navigation
2Opens Enter Destination menu
The Enter Destination menu appears,
the selector bar is located at the menu
item “Start” (
page 135).
Start the route calculation.
Initiating a phone call to an entryStarting navigation to an entry

149 Navigation
Route guidance
Preparation phase
COMAND prepares you for the next driving
maneuver. Based on the example display
shown below, the announcement is made
using “Prepare to turn right”. The display is
not split and displays the map over the en-
tire width.
1Point at which the driving maneuver
takes place (light-blue dot)
2Next road to be taken
3Current vehicle location, the tip of the
triangle points in the vehicle’s direction
of travel
4Road currently being driven downi Depending on the selected basic setting in
“Information on map” (
page 123) in 4 you
will see

Information on “Arrival Time / Distance”

Road currently being driven down

Geo-coordinate display
If the menu item “None” is selected, the display
is hidden.
Announcement phase
COMAND announces the imminent driving
maneuver. Based on the example display
shown below, the announcement is made
900 ft. ahead of the driving maneuver us-
ing “Please turn right in 900 ft. and follow
the ’road name’.”.
i The announced distance to the maneuver
depends on the class of road and its speed limit.
The display is now split in two. The normal
map display is shown in the left-hand half.
In the right-hand half is either an enlarged
detail of the area around the junction
(junction zoom) or a 3D image generated
for the course of the road with the route for
the next driving maneuver drawn in
(
page 150).The example illustrated below shows the
junction zoom in the right-hand half.
1Next road to be taken
2Point at which the driving maneuver
takes place (light-blue dot, shown in
the left-hand and the right-hand dis-
play)
3Visual distance indicator to the driving
maneuver
4Driving maneuver (turn right here)
5Distance information to the driving ma-
neuver
6Route (highlighted in blue, shown in the
left-hand and right-hand display)
i The solid part of the visual distance indicator
3 reduces from bottom to top as the an-
nounced driving maneuver gets closer.

150 Navigation
Route guidance
Maneuver phase
COMAND announces the imminent driving
maneuver. In the example, the announce-
ment is made 90 ft. ahead of the driving
maneuver using “Now turn right.”. The dis-
play is also split into two halves here as in
the announcement phase.
1Current vehicle location, tip of the tri-
angle points in the vehicle’s direction
of travel
2Visual distance indicator to the next
driving maneuver
3Distance information to the driving ma-
neuver
Once the driving maneuver is complete,
COMAND will automatically switch back to
full-screen display.1Route (highlighted in blue)
2Current vehicle location
3Road currently being driven down
4Set map orientation, for explanation
and setting see (
page 120)
5Set map scale, for explanation and set-
ting see (
page 119)
i The map may display other symbols, e.g. the
destination
< or the stopover destination =
(if a stopover destination has been entered).
On multi-lane roads, COMAND may display
traffic lane recommendations for imminent
driving maneuvers. For this there must be
corresponding data available on the digital
map.
With respect to the next two driving ma-
neuvers, COMAND displays the traffic lane
recommendations 6, 7 and 8.
Example display without driving ma-
neuverTraffic lane recommendations

151 Navigation
Route guidance
1Point of the next driving maneuver
2Point of the second driving maneuver.
3Next driving maneuver, exit on right
here
4Visual distance indicator to the next
driving maneuver
5Distance information to the next driv-
ing maneuver
6Recommended lane
7Possible lane
8Lane not recommended
9Current vehicle location, tip of the tri-
angle points in the vehicle’s direction
of travel
i The vehicle’s instrument cluster also dis-
plays traffic lane recommendations. Here only
the recommended lanes are displayed.
Explanation of the traffic lane recom-
mendations

Recommended lane 6:
From this lane it is possible to carry out
the next two driving maneuvers without
changing lanes.

Possible lane 7:
From this lane it is only possible to car-
ry out the next driving maneuver with-
out changing lanes.

Lane not recommended 8:
From this lane it is not possible to carry
out the next driving maneuver without
changing lanes.Depiction of the traffic lane recommen-
dations
The color depiction of the traffic lane rec-
ommendations differs depending on
whether the display is set to day or night
design.
Day designNight design
Recommended
lane 6 = dark blueRecommended
lane 6 = light blue
Possible lane
7 = light bluePossible lane
7 = dark blue
Lane not recom-
mended 8 = greyLane not recom-
mended 8 = grey

153 Navigation
Route guidance
Route guidance from an off-road posi-
tion to a destination
If the vehicle location is within the area
covered by the digital map, but the map it-
self does not contain any information on
the location, the vehicle is in an off-road
position. COMAND can guide you from
such a position to a destination.
At the start of route guidance you will see
the message “Off Mapped Road”, an arrow
and the distance to the destination. The ar-
row indicates the direction of the actual
destination.
The blue marking for the route on the map
starts from the nearest road known to the
system.
As soon as the vehicle is travelling again on
a road known to the system, route guid-
ance continues in the usual manner.
Route guidance from an off-map posi-
tion to a destination
If the vehicle location is outside the area
covered by the digital map, then the vehi-
cle is in an off-map position.
COMAND can guide you from such a posi-
tion to a destination.At the start of route guidance you will see
the message “Off Map”, an arrow and the
distance to the destination. The arrow indi-
cates the direction of the actual destina-
tion.
The blue marking for the route on the map
starts from the nearest road known to the
system.
As soon as the vehicle is travelling again on
a road known to the system, route guid-
ance continues in the usual manner.
Off-road during route guidance
The actual path of the road may deviate
from the data in the digital map due to road
works.
In cases like this, the system is temporarily
not able to locate the vehicle location on
the digital map; the vehicle is thus in an off-
road position.
The display then shows the message “Off
Mapped Road”, an arrow and the distance
to the destination. The arrow indicates the
direction of the actual destination.
As soon as the vehicle location is found
again, route guidance continues in the usu-
al manner.
i During an active telephone call, the naviga-
tion announcements are suppressed.
If you missed an announcement, you can
request a current announcement at any
time.
To request current announcement:
Select “Navi”
K 6.
or
In the map display with the menu sys-
tem displayed (
page 119) select
6.
To switch off navigation announce-
ments: Press
V during the announce-
ment.
Navigation announcements
G Warning
Navigation announcements are intended to
direct you while driving without diverting
your attention from the road and driving.
Please always use this feature instead of
consulting the map display for directions.
Consulting the symbols or map display for
directions may cause you to divert your at-
tention from driving and increase your risk
of an accident.


155 Navigation
Route guidance
i You can have other routes calculated for the
original route guidance using the “Alternative
Route” function.
In the map display with the menu sys-
tem displayed (
page 119) select
“Route”
K “Alternative Route”.
The display is split into two halves. On
the left is the map, which displays one
or more alternative routes between the
start and the destination. The current
route is highlighted in dark blue, other
alternative routes are light blue.
The right side of the display shows in-
formation on the active alternative
route, e.g. length of the segment and
the estimated time of arrival.
To select next or previous alterna-
tive route: Select “Next” or “Previous”.
The selected route is now highlighted
in dark blue.
To return to the original route guid-
ance: Select “Back”.
To start route guidance with the se-
lected alternative route guidance:
Select “Start”.
i The route browser provides an overview of
the route. You can move along the route seg-
ment by segment using the route browser and
view information and details about the route seg-
ments.
In the map display with the menu sys-
tem displayed (
page 119) select
“Route”
K “Route Browser”.
The route browser is in the display.
The top of the display shows informa-
tion on the highlighted route segment,
e. g. the road and the segment of the
road to be driven.
The highlighted route segment is iden-
tified on the map by its white color and
red edge.
To display next or previous route
segment: Select “Next” or “Previous”.
To enlarge or reduce the map
display: Select ; or :.
To close route browser: Select
“Back”.
In the map display with the menu sys-
tem displayed (
page 119) select
“Route”
K “Destination Information”.
The destination information is given in
the display.
Example display with main destination and
stopover destination
1Distance/estimated time of arrival/es-
timated journey time to the stopover
destination
2Stopover destination=
3State and City
4Main destination <
5Distance/estimated time of arrival/es-
timated journey time to the main desti-
nation
Alternative routeRoute browserDisplaying destination information

163 System settings
Opening System menu .............. 164
Menu overview ........................... 164
Display settings .......................... 164
Time settings .............................. 165
Read-out settings ....................... 166
Voice control settings ............... 167
Bluetooth
® settings ................... 169
Reset ............................................ 171
Setting the system language .... 171
Tele Aid* ...................................... 172