2008 MERCEDES-BENZ C-Class Command

181 Voice Control
Phone operation
“Confirm”
While you are entering a number, you can
use the “Confirm” command to have all the
spoken digits repeated by voice control.
Voice control will then prompt you to con-
tinue with the entry.
Example of dialog:
sDial number
tPlease say the number
sZero one three zero
tZero one three zero
sConfirm
tZero one three zero. Please contin-
ue
sFive zero zero five
tFive zero zero five
sOkay
tDialing number.“Correction”
While you are entering a number, you can
use the “Correction” command to correct
the block of digits last spoken. When you
input this command, voice control deletes
the last block of digits and repeats the dig-
its input up to this point. Voice control will
then prompt you to continue with the en-
try.
Example of dialog:
sDial number
tPlease say the number
sZero one three zero
tZero one three zero
sFive zero zero five
tFive zero nine five
sCorrection
tZero one three zero. Please contin-
ue
sFive zero zero five
tFive zero zero five
sOkay
tDialing number.“Delete”
While you are entering a number, you can
use the “Delete” command to delete all the
digits which have been entered. After you
have input this command, voice control
prompts you to enter additional digits or
commands.
Example of dialog:
sDial number
tPlease say the number
sZero one three zero
tZero one three zero
sFive zero zero five
tFive zero zero five
sDelete
tNumber deleted, please say the
number again:
sZero three seven three
tZero three seven three
sThree nine one
tThree nine one
sOkay
tDialing number.

182 Voice Control
Phone operation
“Save name” (address book)
(
page 192)
“Dial name” (address book)
(
page 192)
“Delete name” (address book)
(
page 193)
“Find name” (address book)
(
page 193)
“List phone book” and dialing a phone
number
You can use the “List phone book” com-
mand to listen to all entries in the phone
book in which a phone number is also
stored and, if required, select an entry.
Example of dialog:
sList phone book
The system reads out all the ad-
dress book entries with phone num-
bers.
To select a name and number: press
the ! button at the selected entry.If there is more than one phone number
for an entry, voice control queries this.
tDo you want to make a work call or
a home call?
sHome call
To cancel the dialog: press the L
button.
The system confirms by responding
“Cancel”.
You have cancelled the dialog.
“Redial”
You can use the “Redial” command to redi-
al the number most recently called.
Managing announcement services or
voice mail
You can also use voice control to manage
your voice mail or recorded announcement
services.
Controls
Press the ! button while a phone
call is in progress.
An acoustic signal confirms that the
system is activated.
Say the required digits (“zero” to
“nine”).
or
Say the required words “Star” or
“Hash”.
Say the concluding command “Okay”.
The system dials the number entered.

184 Voice Control
Navigation
You can use voice control to:

enter a state

enter a province

enter a city

enter a district (center)

enter a street

enter a house number

enter an entire address

enter a zip code

find address

enter a point of interest

select one of your previous destina-
tions

call up route information

store a destination

display the map

enlarge/reduce the size of the map

listen to the destination memory

start and stop route guidance

switch the guidance instructions on
and off
To select the navigation application
press the ! button on the multi-
function steering wheel.
Give the “Navigation” command.
Press the ! button.
Give one of the navigation commands
explained below.
You cannot start the route guidance until
all the necessary address data has been
entered.
“Help navigation”/“Help”
Using the “Help navigation” command, you
can have all the essential commands for
the navigation system read out.
i If voice control fails to recognize your entry,
it is advisable to spell the name of the town and
street. Spell names of towns and streets when
abroad.
The system guides you completely through
the dialog to route guidance. As soon as a
valid address is entered (at least the town),
you can use the “Start route guidance”
command to start the route guidance.
“Enter state”/“Enter province”
You can use the “Enter state”/“Enter pro-
vince” command to change the state or
province setting of the navigation system.
Example of dialog:
sEnter state
tPlease enter the name of the state.
uThe system shows a numbered list
of possible state names on the dis-
play. If there is only one entry on
the list, voice control asks if it is
correct.
tPlease select a line number.
sLine number 1 ...
tLine number 1 accepted.
Operation
Commands
Entering an address

185 Voice Control
Navigation
“Enter destination”
You can use the “Enter destination” com-
mand to enter a complete address.
The system guides you through the whole
dialog. As soon as a valid address is en-
tered (at least the town), you can use the
“Start route guidance” command to start
the route guidance.
Example of dialog:
sEnter destination
tDo you want to enter street first or
town first?
sTown
tPlease say the name of the town
sAlbany
tLoading list of towns
uThe system shows a numbered list
of possible city names on the dis-
play. If there is only one entry on
the list, voice control asks if it is
correct.
tPlease select a line number.
sLine number 1 ...
tLine number 1 accepted.
tWould you like to enter a street?sYes
tPlease say the name of the street
sPark Avenue
tLoading list of streets
uThe system shows a numbered list
of possible street names on the dis-
play. If there is only one entry on
the list, voice control asks if it is
correct.
tPlease select a line number.
sLine number 1 ...
tLine number 1 accepted.
tWould you like to enter a house
number?
s No
tWould you like to start route guid-
ance?
sYes
t Starting route guidance
The system stores the selected destination
and starts route guidance.
If you give one of the following commands,
the system guides you through the dialog
to route guidance.“Enter town”
You can use the “Enter town” command to
enter any town in the state or province that
is currently selected.
i If the city you require does not appear in the
list or the system fails to recognize the name of
the town, it can be entered by using the “Spell
town” command.
i You can use the “Next page” or “Previous
page” commands to scroll through the list. You
can use the “Correction” command to enter the
name of the town again.

186 Voice Control
Navigation
Example of dialog:
sEnter town
tPlease say the name of the town
sAlbany
tLoading list of towns
uThe system shows a numbered list
of possible town names on the dis-
play
tPlease select a line number.
sLine number 1 ...
tLine number 1 accepted.
The town is stored for route guidance.
“Spell town”
Using the “Spell town” command, you can
spell any town. This may be necessary if
certain town or street names are not rec-
ognized.
Say the letters in the form of a continuous
string of letters. In the case of long names,
it is not always necessary to spell the
whole name. Usually only the first five to
seven letters are required. A list of city
names will appear in the display and you
can choose the one you require.Say each individual letter clearly.
It is not easy to avoid confusion of similar-
sounding letters (e.g. D and E).
Example of dialog:
sSpell town
tPlease spell the town
sF-R-E-N-S-
tLoading list of towns
uThe system shows a numbered list
of city names on the display
tPlease select a line number.
sNumber three
tNumber three accepted
The town is stored for route guidance.
i You can use the “Next page” or “Previous
page” commands to scroll through the list. You
can use the “Correction” command to spell the
town again from the beginning.
i Note that the list in the display is sorted ac-
cording to the probability of voice recognition.
“Enter district” (center)
You can use the “Enter district” command
to enter an area in a city which you have
selected previously.
Example of dialog:
sEnter district
tPlease say the name of the district.
sManhattan
uThe system shows a numbered list
of districts in the display if the se-
lected city has more than one dis-
trict.
tPlease select a line number.
sLine number 1 ...
tLine number 1 accepted.
The district is stored for route guidance.
“Enter Street”
You can use the “Enter Street” command
to enter the name of any street in the se-
lected city.
i If only a few streets are stored for a selected
town, they will be displayed for selection imme-
diately after you give the “Enter Street” com-
mand.

188 Voice Control
Navigation
Selecting next point of interest
You can use the following commands to
select nearby points of interest.

“Next gas station”

“Next car park”

“Next Mercedes-Benz Service”

“Next restaurant”

“Next hospital”
Example of dialog:
sNext gas station
uThe system shows a numbered list
of gas stations on the display
tPlease select a line number.
sLine number 1 ...
uLine number one accepted. Would
you like to start route guidance?
sYes
The route guidance for this point of inter-
est is started.
or
sNo
tDo you want to save the destina-
tion?sYes
The dialog continues as shown in the sec-
tion “Save destination”
“Last destinations”
You can use the “Last destinations” com-
mand to reselect a destination from a list
of the previously selected destinations.
Example of dialog:
sLast destinations
uThe system shows a numbered list
of the previously selected destina-
tions
tPlease select a line number.
sLine number 1 ...
uLine number one accepted. Would
you like to start route guidance?
sYes
The route guidance for this destination is
started.
“Save destination”
You can use the “Save destination” com-
mand to save the current destination in the
address book by means of a voice tag.
i If the desired voice tag already exists in the
address book, the system asks if you want to add
the address.
Example of dialog:
sSave destination
tPlease say the name.
sSmith
tPlease repeat the name.
sSmith
tWhere would you like to save: home
or work?
sWork
tThe destination has been saved.

189 Voice Control
Navigation
“Find address”
You can use the “Find address” command
to select a previously saved address and
start route guidance.
Example of dialog:
sFind address
tPlease say the name.
sSmith
uThe system shows a numbered list
of saved addresses in the display
tPlease select a line number.
sLine number 1 ...
tLine number 1 accepted.
tStarting route guidance
“Start route guidance”
You can use the “Start route guidance”
command to start route guidance once a
valid destination has been entered.
sStart route guidance
tStarting route guidance
“Route information”
You can use the “Route information” com-
mand to have the following information on
your currently planned route read out:

Distance to destination

Remaining driving time

Expected arrival time
“Guidance instructions on”
When you use the “Guidance instructions
on” command, voice control repeats the
last driving tip. If the driving tip output has
been switched off up to this point, it is now
switched on again.
“Guidance instruction off ”
You can use this command to switch off
the route guidance voice output.
“Cancel route guidance”
You can use this command to stop route
guidance.
Example of dialog:
sCancel route guidance
tAre you sure you want to cancel
route guidance?
sYes
tCancelling route guidance
Voice control cancels route guidance.
or
sNo
tContinuing route guidance.
The dialog with voice control is terminated.
Route guidance remains activated.
“Zoom in/out"
You can use these commands to zoom the
map display one step in or out.
“Zoom in/out completely”
You can use these commands to set the
map display directly to the smallest or larg-
est scale.

190 Voice Control
Navigation
“List destination memory”
You can use the “List destination memory”
command to listen to the entries from the
address book’s destination memory and, if
required, navigate to one of them.
sList destination memory
The system reads out all entries,
from the address book destination
memory.
To select an entry and set an ad-
dress: press the ! button at the se-
lected entry.
tIf there is more than one address,
the system asks “Navigate to: home
or work?”
sHome
The system starts route guidance
To cancel the dialog: press the L
button.
You have cancelled the dialog. The sys-
tem confirms by responding “Cancel”.