GETTING STARTED
Always check the Owner’s Manual for more operating information and safety features
Getting Started
Tribute Quick Tips®are
designed to quickly familiarize
you with some important
features of your Tribute.
The Driver’s View tab is your
index to the Quick Tips
®, locate
the item you would like to
learn more about and then
turn to the listed tab.
This Getting Started section
contains important operating
tips about your Tribute.
Items identified in blue text
call out important information.Passenger air bag
deactivation indicator lightFront passenger sensing system
is designed to turn off passenger
frontal air bag when a low weight
is detected, a person of adultsize
that is sitting properly in the
passenger front seat will enable
passenger frontal air bag.
The sensor also turns off the
passenger front air bag and seat-
mounted side air bag* when the
passenger seat is empty and seat
belt is unbuckled to prevent
unnecessary replacement of airbag(s) after a collision, PASSENGER
AIRBAG OFF indicator lamp is not
illuminated in this case.
The front passenger seat-mounted
side air bag* will be deactivated if
the sensor detects an empty seat;
otherwise, the seat-mounted side
air bag* will be enabled.
PASSENGER AIRBAG OFF indicator (1)
will be illuminated to remind you
the passenger air bag is deactivated.
See Owner’s Manual for
complete details and warnings.
WARNING: If PASSENGER
AIRBAG OFF light goes on or
off or stays off unexpectedly,
please see Owner’s Manual
for various ways this system
may indicate a false reading.
Gas cap
Tip: When fueling vehicle,
use gas cap clip (1) to hold
cap away from vehicle.
After filling vehicle with gasoline,
fully reinstall gas cap by turning
clockwise until a clicking sound
is heard, if gas cap is not fully
installed, Check Engine light
and/or Check Fuel Cap indicator
light may come on.
For more information on Check
Engine light, see Owner’s Manual.
Fuel pump shutoff Disables fuel pump after a
substantial jolt; located in
front passenger’s footwell,
behind flip-up cover, by kick
panel access cover.
To reset: Press down top of
exposed red reset button (2).
WARNING: Do not reset
shutoff switch if you see
or smell fuel.Tire Pressure
Monitoring System
(TPMS)
Warning light illuminates
for a few seconds after
ignition is on.
If tire pressure is too low
in one or more tires, warning
light will illuminate.
Flashing warning light
indicates possible malfunction;
dealer inspection required.
Getting
Started
Getting
Started
PASSENGER AIRBAG OFF
1
1
TUN E
OKEJECT
2
*Denotes optional equipment
DRIVING TIPS
Always check the Owner’s Manual for more operating information and safety features
Driving Tips
Tire economy and tipsCheck pressure monthly when
tires are cold, see Owner’s Manual
for rotation schedule and chart.
Tire pressure Decal on driver’s door latch
pillar provides tire size and
pressure information.
Tire chains**
†Tire chains can damage
aluminum wheels; use on
steel wheels only.
Tips: Use only SAE class “S”
chains, install only on front
axles if vehicle is 2WD
(with P235/70R16 tires) and
on both axles if 4WD.
Install as tightly as possible
and retighten periodically.
Never exceed 30 mph with
tire chains.
Anti-lock Braking
System (ABS)
ABS automatically reduces
hydraulic pressure to any wheel
on the verge of locking up.
You may feel a slight pulsing of
the brake pedal and hear a clicking
noise; this tells you the ABS is
functioning properly; increase pressure
on pedal for maximum braking.
Tips: Maintain constant
pressure on the brake pedal.
Do not pump the brakes.
ABS self test
A self-diagnostic test is performed
when starting; you may feel some
brake pedal pulsation and hear
some noise, this is normal.Traction Control System (TCS)
Enhances traction and safety
by regulating engine torque.
When TCS detects drive wheel
slippage it lowers engine torque
to prevent loss of traction.
Dynamic Stability Control (DSC)
Controls braking and engine
torque in conjunction with ABS
and TCS to help control side slip
on slippery surfaces or during
sudden or evasive maneuvering.
Roll Stability Control (RSC)
System determines when corrective
action is needed; by controlling
engine torque and braking
on each wheel.
Tip: For additional service
details, see Owner’s Manual.
Break-in period
First 1,000 miles: Avoid heavy
repeated brake use; avoid full
throttle, rapid acceleration or
kick-down of transaxle; drive at
varying road and engine speeds.
Do not tow a trailer for first 500 miles.
Do not use special break-in oils.
Tip: Follow the same procedures
with newly overhauled engine
or when brakes are replaced.
Normal maintenance notes
Change engine oil/replace filter
every 5,000*/7,500 miles; rotate
tires every 7,500 miles or sooner
if needed; replace cabin air filter
every 25,000 miles or 24 months.
A.Change: Engine oil/replace filter
Inspect: Engine coolant level, brake
fluid level, tire inflation pressure
and tire wear, power steering
fluid level, washer fluid level
Lube: Locks and hingesB.Inspect: Disc brakes
C.Inspect: Drive belts (3.0 liter),
fuel lines and hoses, brake lines,
hoses and connections, drum
brakes, steering operation and
linkages, front and rear suspension
ball joints, driveshaft dust
boots, exhaust system heat
shields, chassis/bodybolts and
nuts, cooling system and hoses
Replace: Fuel filter
D.Inspect: Drive belts (2.3 liter)
Replace: Air filter
E.Inspect: Hoses and tubes
for emission system
F. Replace: Spark plugs
Inspect: Engine valve clearance
(2.3 liter), adjust if noisy
G.Replace: PCV valve (3.0 liter),
engine coolant (yellow)
7,500 miles
15,000 miles
22,500 miles
30,000 miles
37,500 miles
45,000 miles
52,500 miles
60,000 miles
67,500 miles
75,000 miles
82,500 miles
90,000 miles
A A C
A A D F A
A B C E A A
A D
A B C
A A
A B
5,000 miles*A
97,500 miles
G 100,000 miles* Special operating conditions
** Denotes optional equipment†See Owner’s Manual
