2008 MAZDA MODEL 6 mirror controls

DRIVER’S VIEW
1. Power window switches,
see Switches
2. Power door locks,
see Locks
3. Dual power mirrors,
see Switches
4. Instrument panel lighting,see Getting Started
5. Air vents
6. Turn signal/lighting
control lever,
see Driver Controls
7 . Traction Control System*,
see Instrument Cluster
8. Horn/Air bag
9. Wiper/washer control
lever,see Driver Controls
10. Clock setting buttons,see Getting Started
11. NAVI Display*,
see Owner’s Manual
12. Information display,see Information Display13. AMBAmbient temperature display,
see Information Display.
14. Hazard warning
switch, Press on/off.
15. Audio system,
see Audio Systems
16. Climate control panel,
see Climate Controls
17. Passenger air bag off
indicator,see Seats18. Accessory socket
19. Gearshift lever (A/T),
see Transmission
20. Cup holder
21. Seat warmer*,see Trunk/Console
22. Console, see Trunk/Console
23. Parking brake lever,
see Trunk/Console
24. NAVI Remote control*
Getting Started
MAZDA6 Quick Tips®are
designed to quickly familiarize
you with some important
features of your MAZDA6.
This Driver’s View tab is your
index to the Quick Tips
®, locate
the item you would like to
learn more about and then
turn to the listed tab.
Be sure to see the tab called
Getting Started, this section
contains important operating
tips about your MAZDA6.
Items identified in blue text
call out unique features.
Driver’s
View
HF
E C
P
R
N
D
M
20 123x1000rpm/m
4
5
6
7
8
0 20mph km/h
4060
80
100
120
140
TRIPA8
O.O20 406080100120
140
160
180
200
220
240
012
3
4
14 5
16
30 29
32
26 28 27
8 6 5 2 3 1
25
33
17
15
18
9 10 13 11 12
23
25
24 R
N
D P M
19
21 20
18 22
4
731
Always check the Owner’s Manual for more operating information and safety features
25. Storage
26. Cruise control, see Getting Started
27. Tilt/telescopic
steering-wheel lever,
see Getting Started
28. Audio control switches, see Getting Started
29. Remote trunk release
(Sedan only)
Push to open trunk.
30. Hood release handle
31. Headlight leveling switch*,see Getting Started
32. Bottle holder
CAUTION: Use plastic bottles
with caps, cups may spill
when door is closed.
33. Remote fuel-door
release
*Denotes optional equipment


DRIVER CONTROLS
Always check the Owner’s Manual for more operating information and safety features
Driver
Controls
Switches
12
= Fog lights on: Rotate knob
(2); functions only with headlight
low beams on
Turn signals right/left: Move lever
up/down.
Tip: Headlights switch off auto-
matically within 30 seconds if
lights are left on and switch is
in lock position or key removed.
Wiper/washer control lever
Intermittent wiper: One click down.
To change interval speed:
Rotate inner ring (3).
Normal wiper speed: Two
clicks down.
Fast wiper speed: Three
clicks down.
Single wipe: Push stalk up.
Washer: Pull stalk back.
Rear window wiper/washer
(5-Door)
To activate rear interval wiper:
Rotate knob (4) up to INT.
To activate rear normal speed
wiper: Rotate knob (4) up to ON.
To activate rear washer with
wipers operating: Rotate knob
(4) up to ; hold knob (4)
to continue washing; release
knob and wipers will continue
to operate.
To operate stand alone wipe/
wash function: Rotate knob
(4) down and hold, release
to stop.
Front window switches
One-touch down/up: Press/pull
AUTO switch (3) firmly and
release, window goes down/up
all the way, press/pull briefly
to stop, press/pull lightly and
hold for normal operation.
Tip: During closing window
operation, window will stop
and open partway if object
blocks window operation.
Rear window switches
Push/pull (4) to open/close.
Power window lockout switch
Press button (5), only driver's
window operates; press again
for normal operation.
Power window
initialization procedure
If battery is disconnected or power
window fuse is replaced, the auto
open/close and anti-pinch features
will not function.Resetting procedure:
1. Turn ignition switch
to “ON” position.
2. Make sure that power
window lock switch located
on driver’s door is not
depressed.
3. Press switch and fully open
power window.
4. Pull up switch to fully close
power window and continue
holding switch for about
2 seconds after window
fully closes.
5. Repeat steps 3- 4 for front
passenger power window
while seated in front
passenger seat.
6. Make sure power windows
operate correctly using
door switches.
Dual power
mirrors
Ignition switch
must be in ACC
or ON position.
Switch is on
driver’s door.
To adjust left/right mirror:
Press selector switch (1) left/
right, press switch (2) in direction
of desired movement.
Tip: To lock mirrors in place,
move selector switch (1) to
center position.
Power window
switches
With ignition ON.
All windows
controlled from
driver’s armrest;
passenger doors
have separate
switches.
Turn signal/lighting
control lever
OFF= Lights off
= Tail, parking and
dashboard lights on: Rotate
knob (1) to first notch
= Tail, parking, dashboard
and headlights on: Rotate knob
(1) to second notch
High beams on/off: Push lever
forward/pull back to detent.
To flash high beams: Pull lever
back slightly and release.
34
R
E
A
R
543
AU
TOA
U
TO
LR
2
1

CLIMATE CONTROLS
Always check the Owner’s Manual for more operating information and safety features
Climate
Controls
Information
Display
2. Fan control
Rotate knob clockwise/
counterclockwise to increase/
decrease fan speed.
3. Temperature control
Cooler/warmer = rotate knob
counterclockwise/clockwise
4. A/C= air conditioner
Press to turn on/off.6. Rear window defogger
Press on/off; shuts off with
ignition or automatically after
15 minutes of operation; also
operates heated side mirrors.
Tip: The word “heated” is
imprinted on glass reflector
of side mirrors, this indicates
they are heated.
7. OFF
Control positions for
maximum defrost
Fan to maximum, temperature
to maximum hot, selected.
Tips: To help prevent windshield
fogging in humid weather,
select .
To prevent fogging, never
drive with system off.
Objects placed under the
front seats may interfere
with air flow to the rear.
AMBPress AMB button (2) to display
ambient temperature, press again
to switch display to temperature
set for air conditioner.
Tip: To change from Fahrenheit
to Centigrade or vice versa:
Press AMB button (2) for 2
seconds or more.
1. Air flow selections
= air to dash
= air to dash and floor
= air to floor
= air to floor and
windshield
= air to windshield (defrost)
(Manual Climate Control)5. Air intake control
= recirculate inside air;
use for maximum cooling
= fresh air
WARNING: Do not use
position in cold
weather, windows may
fog and hamper vision.
8. Windshield defroster switch
Press: Fresh air position is
automatically selected, A/C
automatically turns ON.
Automatic operation
Press AUTO (9) for automatic
operation; rotate outer dial to set
temperature, see Owner’s Manual.
Tip: Automatic climate control
display viewed via information
display, see below.
9187
A/C
PUSHAUTO CHPUSHOFF
FRONT
MODE012
3
4
A/C
321
45662354
Manual A/CAutomatic A/C
Information displayInformation display (1) has
the following functions:
Clock, audio display, automatic
climate control display and
ambient/cabin temperature
display (AMB).
88:8.8 FM1 88.9 88.8CHCD MD 123456ST RPT RDM AUTO-M8AMB FOAUTOA/C ECO
12