Page 188 of 438

•Distance To Empty (DTE)
•Elapsed Time
•Tire Pressure Monitor (TPM)
•Personal Settings
To Reset The Display
Pressing and holding the EVIC button once will clear the
function currently being displayed. Reset will only occur
if a resettable function is currently being displayed. To
reset all resettable functions, press and release the EVIC
button a second time within three seconds of resetting the
currently displayed function. Reset ALL will be dis-
played during this three second window.
Compass/Temperature/Audio
Press and release the EVIC button to display one of eight
compass headings to indicate the direction the vehicle is
facing, the outside temperature and the current radio
station.
For additional information regarding the compass, refer
to Personal Settings (Customer-Programmable Features)
in this Section.
Average Fuel Economy
Shows the average fuel economy since the last reset.
When the fuel economy is reset, the display will read
“RESET” or show dashes for two seconds. Then, the
history information will be erased, and the averaging will
continue from the last fuel reading before the reset.
186 UNDERSTANDING YOUR INSTRUMENT PANEL
Page 189 of 438

Distance To Empty (DTE)
Shows the estimated distance that can be traveled with
the fuel remaining in the tank. This estimated distance is
determined by a weighted average of the instantaneous
and average fuel economy, according to the current fuel
tank level. This is not resettable.
NOTE:Significant changes in driving style or vehicle
loading will greatly affect the actual drivable distance of
the vehicle, regardless of the DTE displayed value.
When the DTE value is less than 30 mi (48.3 km)
estimated driving distance, the DTE display will change
to a text display ofLOW FUEL. This display will
continue until the vehicle runs out of fuel. Adding a
significant amount of fuel to the vehicle will turn off the
LOW FUELtext and a new DTE value will be dis-
played, based on the current values in the DTE calcula-
tion and the current fuel tank level.
Elapsed Time
Shows the total elapsed time of travel since the last reset
when the ignition switch is in the ACC position. Elapsed
time will increment when the ignition switch is in the ON
or START position.
Tire Pressure Monitor (TPM)
Refer to Section 5, “Tire Pressure Monitoring System
(TPMS)” for system operation.
Personal Settings (Customer-Programmable
Features)
This allows the driver to set and recall features when the
transmission is in PARK (automatic transmission) or the
vehicle is stopped (manual transmissions).
Press and release the EVIC button until “Personal Set-
tings” is displayed in the EVIC.
UNDERSTANDING YOUR INSTRUMENT PANEL 187
4
Page 429 of 438

Malfunction Indicator Light (Check Engine) . . 181,350
Manual, Service......................... 414
Manual Transaxle..................239,242,374
Downshifting......................... 243
Fluid Level Check...................374,375
Frequency of Fluid Change............375,376
Lubricant Selection..................374,375
Map/Reading Lights..................... 120
Master Cylinder (Brakes).................. 372
Mirrors ................................ 78
Electric Powered....................... 80
Exterior Folding........................ 80
Outside.............................. 79
Rearview............................. 78
Vanity ............................... 82
Modifications/Alterations, Vehicle............. 8
Monitor, Tire Pressure System............... 301
Mopar Parts.........................351,413
Multi-Function Control Lever............... 121Navigation Radio........................ 217
Navigation System....................... 217
New Vehicle Break-In Period................ 69
Occupant Restraints....................... 35
Octane Rating, Gasoline (Fuel).............. 311
Odometer............................. 179
Trip .............................177,179
Off-Pavement Driving (Off-Road)............ 252
Off-Road Driving (Off-Pavement)............ 252
Oil Change Indicator..................... 184
Oil Change Indicator, Reset................. 184
Oil, Engine.........................352,395
Capacity............................ 395
Change Interval....................... 354
Checking............................ 352
Disposal............................ 355
Filter ............................... 355
Identification Logo..................... 354
INDEX 427
10