2008 JEEP GRAND CHEROKEE SRT Owners Manual

Page 345 of 405

JEEP GRAND CHEROKEE 2008 WK / 3.G SRT Owners Manual Underhood Fuses (Integrated Power Module)
Cav-
ityCartridge
FuseMini Fuse Description
8 10 Amp
RedLt Park Lamps
Cav-
ityCartridge
FuseMini Fuse Description
9 10 Amp
RedTrailer-Tow Park
Lamps
10 10 Amp

Page 346 of 405

JEEP GRAND CHEROKEE 2008 WK / 3.G SRT Owners Manual Cav-
ityCartridge
FuseMini Fuse Description
18 20 Amp
YellowFront Control Module
(FCM) Batt #1
19 20 Amp
YellowLt Trailer-Tow Stop/
Turn
20 20 Amp
YellowFront Control Module
(FCM) Batt #3
21 20 Amp
Ye

Page 347 of 405

JEEP GRAND CHEROKEE 2008 WK / 3.G SRT Owners Manual ²Anytime you store your vehicle, or keep it out of
service (i.e. vacation) for two weeks or more, run the
air conditioning system at idle for about five minutes
in the fresh air and high blower setti

Page 348 of 405

JEEP GRAND CHEROKEE 2008 WK / 3.G SRT Owners Manual BULB REPLACEMENT
High Intensity Discharge Headlights (HID) Ð If
Equipped
The headlights are a type of high voltage discharge tube.
High voltage can remain in the circuit even with the
headlight switc

Page 349 of 405

JEEP GRAND CHEROKEE 2008 WK / 3.G SRT Owners Manual 2. Turn the low or high beam bulb 1/4 turn counter
clockwise to remove from housing.3. Disconnect the electrical connector and replace the
bulb.
CAUTION!
Do not touch the new bulb with your fingers. O

Page 350 of 405

JEEP GRAND CHEROKEE 2008 WK / 3.G SRT Owners Manual Front Turn Signal
1. Open the hood.
2. Turn the turn signal bulb 1/4 turn counter clockwise
to remove from housing.3. Disconnect the electrical connector and replace the
bulb.
CAUTION!
Do not touch th

Page 351 of 405

JEEP GRAND CHEROKEE 2008 WK / 3.G SRT Owners Manual Front Fog Light
1. Reach behind the front fascia from under the vehicle.
2. Turn the front fog light bulb 1/4 turn counter clock-
wise to remove from housing.
3. Disconnect the electrical connector an

Page 352 of 405

JEEP GRAND CHEROKEE 2008 WK / 3.G SRT Owners Manual 3. Squeeze the socket assembly tabs to remove it from the
housing.
4. Pull the bulb to remove it from the socket.
5. Replace the bulb, reinstall the socket, and reattach the
light assembly.Center High