2008 HUMMER H3 lock

[x] Cancel search: lock

Page 281 of 416

HUMMER H3 2008  Owners Manual Then, without shutting off the engine, follow these steps:
1. Flip the handle up and then pull out the dipstick
and wipe it with a clean rag or paper towel.
The automatic
transmission dipstick
handle

Page 282 of 416

HUMMER H3 2008  Owners Manual How to Add Automatic
Transmission Fluid
Refer to the Maintenance Schedule to determine what
kind of transmission �uid to use. SeeRecommended
Fluids and Lubricants on page 6-12.
Add �uid only after che

Page 292 of 416

HUMMER H3 2008  Owners Manual If the overheat warning continues, there is one more
thing you can try. Add the proper mixture directly to the
radiator, but be sure the cooling system is cool before
you do it.
{CAUTION:
Steam and sc

Page 306 of 416

HUMMER H3 2008  Owners Manual 7. Locate the vertical headlamp aiming screws, which
are under the hood near each headlamp assembly.
The adjustment screw can be turned with an E8
Torx
®socket or T15 Torx®screwdriver.8. Turn the ve

Page 307 of 416

HUMMER H3 2008  Owners Manual Bulb Replacement
For the proper type of replacement bulbs, see
Replacement Bulbs on page 5-52.
For any bulb changing procedure not listed in this
section, contact your dealer/retailer.
Halogen Bulbs
{

Page 309 of 416

HUMMER H3 2008  Owners Manual 4. Turn the bulb socket counterclockwise to remove it
from the taillamp assembly.
5. Holding the socket, pull the old bulb to release it
from the socket.
6. Push the new bulb into the socket until it

Page 310 of 416

HUMMER H3 2008  Owners Manual 3. Pull the license plate lamp away from the fascia.
4. Turn the bulb socket counterclockwise and pull the
bulb straight out of the license plate lamp assembly.
5. Install the new bulb into the socket

Page 325 of 416

HUMMER H3 2008  Owners Manual TPMS Sensor Matching Process
Each TPMS sensor has a unique identi�cation code.
Any time you replace one or more of the TPMS sensors
or rotate your vehicle’s tires, the identi�cation codes
need to be