2008 HONDA PILOT remote control

If it takes several pushes on the
button to operate the rear
entertainment system, have your
dealer replace the batteries as soon
as possible.
The rear control panel can be
detached f rom the ceiling unit and
used as a remote control. To remove
it f rom the ceiling unit, press the
release button. The control panel will
swing down partway. Pivot it down
f urther past the detent until it
detaches f rom the hinge. To reinstall
it, reverse the procedure.
Battery type: BR3032An improperly disposed of battery
can hurt the environment.
Always conf irm local regulations f or
battery disposal.
CONT INUED
Remote Control Replacing the Remote Control
Batteries
Rear Entertainment System
Features
171
COVER
RELEASE BUTTON
\f—\f—\fy


y
(+\fy\f
y
2008 Pilot

The HomeLink
canbeprogrammedtooperateupto
around your home, such as garage
doors, lighting, or home security
systems.
If equipped
CONT INUED
Features
183
\f—\f—\fy

y
(+\fy\f
y
Homelink® Universal Transceiver
General Safety Inf ormation
Before programming your HomeLink
to operate a garage door opener,
confirm that the opener has an
external entrapment protection

If your garage door was manufactured
before April 1, 1982, you may not be
able to program HomeLink to operate
it. These units do not have safety
features that cause the motor to stop
and reverse it if an obstacle is detected
during closing, increasing the risk of
injury. Do not use HomeLink with any garage door opener that lacks
Important Saf ety Precautions
safety stop and reverse features.
Units manufactured between April 1,
1982 and January 1, 1993 may be
equipped with safety stop and reverse
features. If your unit does not have an
external entrapment protection
system, an easy test to confirm the
function and performance of the safety
stop and reverse feature is to lay a
2x4 under the closing door. The door
other safety and reverse stop features.
contacting the piece of wood.
As an additional safety feature, garage
door openers manufactured after
should stop and reverse upon
January 1, 1993 are required to have
external entrapment protection
systems, such as an electronic eye,
which detect an object obstructing the


door.
Refer to the safety information that
came with your garage door opener
to test that the safety features are
functioning properly. If you do not
have this information, contact the
manufacturer of the equipment.
Before programming Home Link
to a garage door or gate opener,
make sure that people and objects
are out of the way of the device to
prevent potential injury or damage.
When programming a garage door
opener, park just outside the
garage.
Universal
Transceiver built into your vehicle
threeremote controlled devices
system, such as an "electronic eye," or
2008 Pilot

Make sure you have properly
completed the ‘‘Training
HomeLink’’ procedure.
location will vary, depending on
the manufacturer.Press and hold the button on
HomeLink f or 3 to 4 seconds.
f or about 1 second. It should
operate the garage door.
The ‘‘Training HomeLink’’
procedure trains HomeLink to the
proper garage door opener code.
The f ollowing procedure
synchronizes HomeLink to the
garage door opener so it sends and
receives the correct codes.
For security purposes, newer garage
door opening systems use a ‘‘rolling’’
or variable code. Information from
the remote control and the garage
door opener is needed bef ore
HomeLink can operate the garage
door opener.
garage door opener unit until the
indicator next to the button comes
on. The indicator may blink, or
comeonandstayon.Youthen
have approximately 30 seconds to
complete the f ollowing steps.
2. 4.
1.
T raining With a Rolling Code
System
Features
185
TRAINING BUTTON
\f—\f—\fy

y
(+\fy\f
\fy
Homelink® Universal Transceiver
garage door opener unit. The
Find the ‘‘l earn’’ button on your 3. Press the “learn” button on the
5. Press the HomeLink button again
If the button works,
programming is complete.
If the button does not work go
operate any other compatible
remotely controlled device around
your home (lighting, automatic
gate, security system, etc.).
pushing it for about 1 second.
to step 5.
5. PushandholdtheHomeLink
f or 2 seconds then stays on, you
Code System’’ (see page 185).
button and watch the red indicator
on Homelink.
If the indicator stays on, press
If the indicator f lashes rapidly
the Homelink button again; the
have a rolling code transmitter:should operate.
remotely controlled device
other two HomeLink buttons to go to ‘‘Training with a Rolling
6. Repeat these steps to train the
4.
Test the Homelink button by
2008 Pilot

......................................
Saf ety Belts .10
............
Safety Defects, Reporting .310
.................................
Saf ety Features .9
.........................................
Airbags .11
.....................................
Seat Belts .10
.............
Saf ety Labels, Location of .58
..............................
Saf ety Messages .iii
.........................................
Seat Belts .10
...............
Additional Information .21
Automatic Seat Belt
...............................
Tensioners .23
.....................................
Cleaning .260
......................
Lap/Shoulder Belt .22
................................
Maintenance .23
Reminder Light and
................................
Beeper .21,62 ...................
System Components .25
...............
Use During Pregnancy .19
...
Wearing a Lap/Shoulder Belt .15
....................................
Seat Heaters .86
.................................................
Seats .87
............
Folding the Second Seat .89
...............
Folding the Third Seat .90
..........................
Head Restraints .91
.........
Reclining the Second Seat .89
............
Reclining the Third Seat .90
.......................
Third Seat Access .90
...................
Seats, Adjusting the .87-91
............................
Security System .176
...............................
Serial Number .292
...........................
Service Intervals .237
.............................
Service Manual .311
.........
Service Station Procedures .189
..........................
Setting the Clock .142
Shif ting the Automatic
.............................
Transmission .206
.....
Shif t Lever Position Indicator .206
........................
Shif t Lock Release .209
Side Marker Lights, Bulb
.........................
Replacement in .255
..............................
Side Airbags .11,31
..........................
Of f Indicator .34,63
...................
Radiator Overheating .280
.............
Radio/CD Sound System .115
...........................
Readiness Codes .305
...............................
Rear A/C Unit .113
............
Rear Audio Control Panel .149
........
Rear Entertainment System .144
..
Rear Lights, Bulb Replacement .258
.
Rear View Camera and Monitor .182
............................
Rear View Mirror .92
.................
Rear Window Def ogger .77
.
Rear Window Wiper and Washer .74
..........
Reclining the Seat Backs .87-91
.............................
Reminder Lights .61
................
Remote Audio Controls .140
.................
Remote Control (RES) .171
.......................
Remote Transmitter .83
Replacement Inf ormation
................
Engine Oil and Filter .246
.................................
Floor Mats .260
..........................................
Fuses .285
................................
Light Bulbs .254
........................................
Minder .243
................................
Timing Belt .252
...........................................
Tires .265 .............................
Wiper Blades .261
Replacing Seat Belts Af ter a ............................................
Crash .23
...
Reserve Tank, Engine Coolant .192
...............................
Restraint, Child .38
..................
Reverse Gear Position .207
................................
Rotation, Tire .266
Index
R
S
VI
——y


y
(+yy
2008 Pilot