2008 HONDA ACCORD SEDAN Owner's Manual (in English)

Page 217 of 420

HONDA ACCORD SEDAN 2008  Owners Manual (in English) To set the time, press the CLOCK 
button until you hear a beep. The
displayed time begins to blink. 
Change the hours by pressing the H 
(hour) button until the numbers
advance to the desired time. Ch

Page 218 of 420

HONDA ACCORD SEDAN 2008  Owners Manual (in English) Ú
You can also adjust the clock and 
switch the clock display between 24-
hours and 12-hours in the menu
mode. 
To adjust the clock setting:
Press and release the MENU 
button. The display shows you

Page 219 of 420

HONDA ACCORD SEDAN 2008  Owners Manual (in English) To set the time, turn the selector 
knob and select the hours or the
minutes, then press the knob to 
enter your selection. The display 
changes to the setting display. 
Turn the selector knob up or d

Page 220 of 420

HONDA ACCORD SEDAN 2008  Owners Manual (in English) With the system set, you can still 
open the trunk with the remote
transmitter without triggering the 
alarm. The alarm will sound if the 
trunk lock is f orced, or the trunk is
opened with the trunk

Page 221 of 420

HONDA ACCORD SEDAN 2008  Owners Manual (in English) Use the remote transmitter
to quickly check that the hood, the 
trunk, and all doors are closed. Push 
the lock button twice within 5 
seconds. There should be an audible
conf irmation beep. 
Do not a

Page 222 of 420

HONDA ACCORD SEDAN 2008  Owners Manual (in English) CONT INUED
Compass operation can be af f ected 
by driving near power lines or
stations, across bridges, through 
tunnels, over railroad crossings, past 
large vehicles, or driving near large
objects

Page 223 of 420

HONDA ACCORD SEDAN 2008  Owners Manual (in English) Turn the selector knob to select 
‘‘CALIBRATION.’’Press the selector knob to enter
your selection. The display shows
you ‘‘PUSH CAL START.’’ 
While setting, pressing the 
RETURN button

Page 224 of 420

HONDA ACCORD SEDAN 2008  Owners Manual (in English) In most areas, there is a variation 
between magnetic north and true
north. Zone selection is required so 
the compass can compensate f or this 
variation. To check and select the
zone, do this:Once t