2008 GEELY MK Chapter 9

1 1018005004 Side Dash25.5 2
2 1018005000 Front floor13.5 4
3 1018005001 Front floor and rear floor 44.5 6
4 1018005003 Front floor30.5 2
5 1018005002 Front floor 2
6 1018005005 Rear floor 2
7 1018005006 Side dash11 2
8 1108005007 Positioning plate for taillight9.5 2
9 1018005008 Front floor9.5 4
10 1018005009 B-pillar17 2
11 1018005010 B-pillar25 4
12 1018005011 Front of Side dash20 2Chapter 18 Plug ListNo. Picture Material code Position Diameter QuantityInterior & Exterior Trim and Accessory -Plug List6-42

Part VII BodyChapter 1 SurveySection 1 Body StructureThe body is made up of main structure, movable plate work, interior/exterior trim parts, and body accessories.I. Main StructureAs shown in Fig.5-1, the main structure is made up of various assemblies and parts including engine compartment
assembly & front wall parts, floor assembly, left/right wall assembly, rear wall assembly, roof assembly and
luggage compartment main cover assembly etc.Fig. 5-1 Main Structure
1 Engine compartment assembly & front wall parts 2. Left/right wall assembly
3. Luggage compartment main cover assembly 4. Rear wall assembly 5. Floor assembly
6. Roof assembly 7. Front cross beam assembly(1) Engine Compartment Assembly & Front Wall Parts The main function of the engine compartment assembly and front wall parts is to form an engine compartment
and absorb most energy generated when the vehicle is collided from the front. The compartment provides a hood
for the engine and its accessories, which can prevent the front wheel from throwing mud. In the appearance, it
represents the body's design requirements. As shown in Fig.5-2, the engine compartment assembly and front wall
parts include front cross beam assembly, left/right longitudinal beam assembly, radiator cross beam assembly,Body -Survey7-1
123456
7

Chapter 2 Body RepairSection 1 Body Damage Forms and requirements For RepairI. Damage Type The damage type includes deformation, crack, rust-through, water leakage, dust leakage and the like caused
by collision, overload, fatigue, and corrosion.
The body damage is not merely caused by the huge force. As some parts (such as door etc.) are damaged, the
vehicle stays in an abnormal status, which also can cause damage. In most cases, the bend and torsion is caused
by huge local load in the impact or turnover accident.
Typical Body Damage:
1. Front Center Collision (Fig. 5-13)Fig. 5-13 Front Center CollisionBody Repair -Body Damage Forms and requirements For Repair7-9 For the damage caused by the collision on the front center, it usually makes the engine compartment front part
and the engine hood left/right side extend inwards so the following positions shall be checked:
a. Ambience of the left/right assembling position of the hood plate
b. Ambience of the joints of the front cross beam and the left/right longitudinal beam
2. Front External Force or Left External Force (Fig. 5-14)Fig. 5-14 Front External Force or Left External Force As shown in Fig. 5-14, when the front is pressed or the left side end is acted by the external force, the external
force will spread to around the front suspension mounting position from the left/right side of the hood, so
deformation occurs easily in this position.