2008 FORD E SERIES high beam

[x] Cancel search: high beam

Page 16 of 280

FORD E SERIES 2008 4.G Owners Manual Overdrive off:Illuminates when
the overdrive function of the
transmission has been turned off,
refer to theDrivingchapter. If the
light does not illuminate, have the transmission serviced soon, or dam

Page 35 of 280

FORD E SERIES 2008 4.G Owners Manual Daytime running lamps (DRL) (if equipped)
Turns the headlamps on with a reduced output.
To activate:
•the ignition must be in the ON position and
•the headlamp control is in the OFF or parking lam

Page 37 of 280

FORD E SERIES 2008 4.G Owners Manual 3. Turn on the low beam headlamps
and open the hood.
4. Locate the high intensity area of
the beam pattern and place the top
edge of the intensity zone even with
the horizontal reference line (4). If

Page 41 of 280

FORD E SERIES 2008 4.G Owners Manual Function Number of
bulbsTrade number
Side marker with
sealed beam2 194
Back-up lamps 2 3156K or 3156
License plate lamp 1 168
Stop/tail/turn/side
marker lamp2 3457K or 3357K
High-mount brakelamp 2 912

Page 44 of 280

FORD E SERIES 2008 4.G Owners Manual Sealed beam
3. Rotate the bulb socket counterclockwise and remove.
4. Carefully pull the bulb straight out of the socket.
To complete installation, follow the removal procedures in reverse order.
Repl

Page 193 of 280

FORD E SERIES 2008 4.G Owners Manual Fuse/Relay
LocationFuse Amp
RatingPassenger Compartment Fuse
Panel Description
29 10A Diagnostics
30 15A Headlamps (high beam indicator),
DRL
31 10A Right headlamp (low beam)
32 20A Power point #1 (in

Page 276 of 280

FORD E SERIES 2008 4.G Owners Manual Exhaust fumes ..........................163
F
Fail safe cooling ........................243
Fluid capacities .........................264
Four-Wheel Drive vehicles
preparing to drive your
vehicle ....