2008 FORD C MAX Stability control

Downloaded from www.Manualslib.com manuals search engine Fuel and refuelling
Safety precautions........................149
Fuel quality - Petrol........................149
Fuel quality - Flexible Fuel............149
Fuel quality - Diesel.......................150
Catalytic converter........................150
Fuel filler flap....................................151
Refuelling.........................................151
Fuel consumption..........................151
Technical specifications................152
Transmission
Manual transmission.....................154
Automatic transmission................154
Brakes
Principle of operation....................158
Hints on driving with ABS.............158
Parking brake.................................159
Stability control
Principle of operation....................160
Using stability control.....................161
Parking aid
Principle of operation....................162
Using the parking aid....................162
Cruise control
Principle of operation....................164
Using cruise control......................164
Automatic speed limiter
(ASL)
Principle of operation....................166
Load carrying
General information.......................167
Luggage covers.............................167
Rear under floor storage..............168
Towing
Towing a trailer...............................169
Detachable tow ball......................169
Driving hints
Running-in.......................................173
Emergency
equipment
First aid kit.......................................174
Warning triangle.............................174
Status after a
collision
Fuel cut-off switch.........................175
Inspecting safety systemcomponents...............................175
Fuses
Fuse box locations........................176
Changing a fuse.............................177
Fuse labels......................................177
Fuse specification chart................179
Vehicle recovery
Towing points.................................185
Towing the vehicle on fourwheels.........................................186
3
Table of contents

Downloaded from www.Manualslib.com manuals search engine Multi-function lever: Information display controls. Direction indicators.See Direction indicators (page 71). Main beam. See Lightingcontrol (page 64).
C
Instrument cluster. See Gauges (page 88). See Warning lampsand indicators (page 90).
D
Horn. See Horn (page 55).E
Wiper lever. See Wipers and washers (page 59).F
Card holder.G
Air vents. See Air vents (page 107).H
Hazard warning flasher switch. See Hazard warning flashers(page 70).I
Airbag deactivation indicator. See Disabling the passengerairbag (page 33). Parking aid switch. See Using the parkingaid (page 162).
J
Start button. See Keyless starting (page 145).J
Heated windscreen switch. See Heated windows and mirrors(page 114).K
Heated rear window switch. See Heated windows and mirrors(page 114).L
Stability control (ESP) switch. See Using stability control (page161).M
Climate controls. See Climate control (page 107).N
Audio or navigation unit. See separate handbook.O
Heated front seat switch. See Heated seats (page 132).P
Ignition switch. See Ignition switch (page 141).Q
Steering wheel adjustment. See Adjusting the steering wheel(page 55).R
Cruise control switches. See Using cruise control (page 164).S
Audio controls. See Audio control (page 55).T
Instrument lighting dimmer. See Instrument lighting dimmer(page 134).U
11
Quick start

Downloaded from www.Manualslib.com manuals search engine Air vents. See Air vents (page 107).D
Heated windscreen switch. See Heated windows and mirrors(page 114).E
Multi-function lever: Information display controls. See Informationdisplays (page 96). Direction indicators. See Directionindicators (page 71). Main beam. See Lighting control (page64).
F
Horn. See Horn (page 55).G
Instrument cluster. See Gauges (page 88). See Warning lampsand indicators (page 90).
H
Wiper lever. See Wipers and washers (page 59).I
Headlamp levelling control. See Headlamp levelling (page 66).J
Lighting control. See Lighting control (page 64). Front fog lamps.See Front fog lamps (page 65). Rear fog lamp. See Rear foglamps (page 65).
K
Instrument lighting dimmer. See Instrument lighting dimmer(page 134).L
Ignition switch. See Ignition switch (page 141).M
Cruise control switches. See Using cruise control (page 164).N
Steering wheel adjustment. See Adjusting the steering wheel(page 55).O
Audio controls. See Audio control (page 55).P
Heated rear window switch. See Heated windows and mirrors(page 114).Q
Stability control (ESP) switch. See Using stability control (page161).R
Climate controls. See Climate control (page 107).S
Audio/navigation unit. See separate handbook.T
Heated front seat switch. See Heated seats (page 132).U
13
Quick start

Downloaded from www.Manualslib.com manuals search engine Engine coolant temperaturegauge
All vehicles
Shows the temperature of the enginecoolant. At normal operatingtemperature, the needle will remainin the centre section.
CAUTION
Do not restart the engine until thecause of overheating has beenresolved.
If the needle enters the red section,the engine is overheating. Stop theengine, switch the ignition off anddetermine the cause once theengine has cooled down. SeeEngine coolant check (page 201).
Fuel gauge
The arrow adjacent to the fuel pumpsymbol indicates on which side of thevehicle the fuel filler cap is located.
WARNING LAMPS AND
INDICATORS
The following warning lamps andindicators illuminate when the ignitionis switched on:
•Airbag
•Oil pressure
•Engine immobiliser
•ABS
•Stability control (ESP)
•Engine
•Doors open
•Brake system
•Engine systems fault
•Frost
•Power steering
•Ignition
If a warning lamp or indicator doesnot illuminate when the ignition isswitched on, it indicates amalfunction. Have the systemchecked by an expert.
ABS warning lamp
If the ABS warning lampilluminates when driving, itindicates a malfunction.Have this checked by an expert.Normal braking (without ABS) will bemaintained.
Airbag warning lamp
If the warning lamp does notilluminate, if it stays on orilluminates intermittently orcontinuously while driving, it meansthere is a malfunction. Have thesystem checked by an expert.
Brake system warning lamp
WARNING
If it illuminates after releasing theparking brake or when driving,have the braking system checked byan expert immediately.
90
Instruments

Downloaded from www.Manualslib.com manuals search engine Oil pressure warning lamp
WARNING
Do not resume the journey if theoil level is correct. Have theengine checked by an expert.
If it stays on after starting orilluminates during a journey,stop immediately, switch offthe engine and check the engine oillevel. Top up straight away if the levelis low.
Power steering warninglamp
Illuminates to indicate amalfunction of the powersteering system. Fullsteering will be maintained but youwill need to exert greater force onthe steering wheel. Have the systemchecked by an expert as soon aspossible.
Rear fog lamp indicator
The indicator in theinstrument cluster willilluminate when the rear foglamps are switched on.
Seat belt reminder
WARNINGS
The seat belt reminder remainsin stand-by mode after thedriver has fastened his/her seat belt.It will be reactivated if the driverunbuckles his/her seat belt.
WARNINGS
Never sit on top of a buckledseat belt to avoid the seat beltreminder. The restraint system canonly work properly if passengershave buckled up their seat belts.
When the vehicle’s speedexceeds 23 km/h (14 mph),the seat belt reminder willilluminate if the driver’s seat belt isunbuckled. The seat belt reminderwill not go out until the driver hasfastened his/her seat belt.
To deactivate the seat belt reminderfor one ignition cycle, the driver mustbuckle and unbuckle the seat beltwithin 3 seconds with the ignitionswitched on.
Stability control (ESP)indicator
Note:If the indicator does notilluminate when the ignition isswitched on or if it stays illuminatedwhilst driving, it indicates amalfunction.
Illuminates when stabilitycontrol is switched off andflashes when stability control(ESP) is activated.
93
Instruments

Downloaded from www.Manualslib.com manuals search engine SystemWarninglampMessage
Select N (NEUTRAL) or P(PARK) and apply theparking brake until the trans-mission has cooled and themessage disappears from thedisplay.
The transmission is too hot. Inthese extreme conditions thetransmission will disengagedrive in order to preventdamage. You will not be ableto drive until the transmissionhas cooled.
redTrans. too hot Press brake
Automatic transmission.amberTransmission malfunction
At low outside temperatures,after starting the engine, itmay take the transmissionseveral seconds to engage R(REVERSE) or D (DRIVE).Keep the brake pedaldepressed until thesemessages disappear from thedisplay.
-Engagement in progressPress brake pedal
Automatic transmission.-Move shifter to P
Stability control (ESP)
SystemWarninglampMessage
Stability control (ESP).amberESP malfunction
106
Information displays

Downloaded from www.Manualslib.com manuals search engine PRINCIPLE OF
OPERATION
Electronic stabilityprogramme (ESP)
WARNING
ESP does not relieve you of yourresponsibility to drive with duecare and attention.
without ESPA
with ESPB
The ESP supports stability when thevehicle starts to slide away from yourintended path. This is performed bybraking individual wheels andreducing engine torque as needed.
The system also provides anenhanced traction control functionby reducing engine torque if thewheels spin when you accelerate.This improves your ability to pull awayon slippery roads or loose surfaces,and improves comfort by limitingwheel spin in hairpin bends.
Stability control (ESP) warninglamp
The ESP warning lamp will flash whenthe system is operating. SeeWarning lamps and indicators(page 90).
Emergency brake assist
WARNING
Emergency brake assist doesnot relieve you of yourresponsibility to drive with due careand attention.
Emergency brake assist will detectwhen you brake heavily by measuringthe rate at which you press the brakepedal. It will provide maximumbraking efficiency as long as youpress the pedal. Emergency brakeassist can reduce stopping distancesin critical situations.
160
Stability controlE72903AAABBBB

Downloaded from www.Manualslib.com manuals search engine USING STABILITY
CONTROL
Press and hold the switch for onesecond. The switch will illuminate. Amessage will be shown in the display.See Information messages(page 103).
Press the switch again to turn thesystem on. The system will beswitched on automatically every timeyou switch the ignition on.
For item location: See Quick start(page 10).
161
Stability controlE78085